2. Autopot
  3. AQUAplate Square

Autopot AQUAplate Square Operating instructions

  • Hello! I've reviewed the instructions for the AutoPot AQUAplate Square system. This document details how to set up your system for substrate-free growing, including proper assembly, nutrient recommendations, and how to use the included PotSock and other components. I am ready to answer your questions about it.
  • What is the suggested water temperature?
    What nutrient dosage should I use?
    Can I use rooted plant plugs with the system?
Square Kit
•Grow free from substrate
•Direct access to nutrient rich water
•Adapt your AutoPot Watering System
for aeroponic/hydroponic growing
Includes a PotSock Square
for superior root control
www.autopot-usa.com
Strong, healthy plants
on a plate!
Kit Contents:
1x AQUAplate Square
1x PotSock Square
5x Mesh Pots
5x Neoprene Collars
5x Foam Discs
Two AQUAplate
Square Kits fit an
easy2grow tray
8 18997 01045 8
Slot your plant into the black
neoprene collar.
Fit black neoprene collar
into mesh pot.
Rooted plant plugs
may also be used
Place the mesh pot
in the AQUAplate
Assemble and connect your
reservoir, tray and AQUAvalve
(supplied separately).
Fill your reservoir
(supplied separately).
Do not switch on.
Seat blue foam pad
in the base of the mesh pot
Turn on your system
Place the AQUAplate
in your tray
Position tray so it is level.
Insert PotSock, gold face up
1 2 3
65a4
5b
987
AQUAplate Square set up Instructions
We recommend a target water
temperature of 64-68°F / 18-20°C
Plants grown without substrate need
lower doses of nutrient. Start at half
strength and gradually increase.
Add an Airstone to the tray for even
greater growth acceleration!
Tip 3Tip 2Tip 1
/