Page is loading ...
Kurzanleitung / Quick installation guide
SNC-3302, SNC-3303, SNC-3305
Version 1.4sfi/1014/dt-engl/A5
QUICK INSTALLATION GUIDE
IP camera SNC-3302, SNC-3303 and SNC-3305
To operate the IP camera, please follow these steps:
1. Install the camera in the desired location.
2. Connect the camera to power using PoE (PoE switch or PoE injector required) or
12 V DC.
3. Insert the CD (included in the delivery) into your PC/laptop and install the IP-finder.
4. The IP-finder displays an IP address for the camera. Double-click on the IP address
and the Internet Explorer comes up automatically. In case this doesn’t work, you may
also enter the IP address (as shown by the IP-finder) manually into the Internet
Explorer. Using the IP-finder, another IP address can be assigned to the camera, if
required.
Note:
The camera comes with a default IP address:
Default IP address: 192.168.1.168 (or by DHCP, if available)
User name: admin
Password: 9999
Please refer to the user manual for further information on camera configurations.
Subject to technical changes. Errors excepted.
No.
Connector
1
Line out & Line in/ Mic in
2
Power LED
3
Reset button
4
Auto iris connector
5
Network (PoE) and
network LEDs
6
Alarm I/O
Pin 1
Output +
Pin 2
Output -
Pin 3
Input +
Pin 4
Input -
7
Video (BNC connector)
8
Micro SD card slot
9
Power supply 12 V DC
4 3 2 1
7
6
5
4
8
1
9
2
3
/
