Whirlpool ARC7593/1 Program Chart

Brand: Whirlpool

Model: ARC7593/1

Category: Fridge-freezers

Type: Program Chart

This manual is also suitable for

PRODUCT SHEET

Your new appliance is a combined ventilated, No-Frost fridge-

freezer exclusively for domestic use.

Whirlpool Total-no-frost fridge freezers circulate chilled air around

the storage areas, reducing humidity to prevent the formation of ice,

thereby completely eliminating the need for defrosting. Frozen items

don’t stick to the walls, labeling stays legible and storage space

remains neat and clear. No-Frost’s temperature control helps keep

food fresher for longer.

A. Refrigerator Compartment

1. Shelves / Shelf area

1a. Plastic “Dual” shelf (depending on the model)

2. Lighting

3. Cooler compartment (depending on the model)

4. Crisper drawers

5. Door trays

6. Separator (depending on the model)

7. Bottle rack

8. Rating plate

9. Antibacterial filter (depending on the model)

10. Air control (depending on the model)

B. Freezer Compartment

11. Upper basket (freezing zone)

12. Ice tray

13. Shelves (depending on the model)

14. Storage basket for frozen food items

15. Freezer compartment door

16. The freezer door trays for pizza or other frozen products with

short storage time (depending on model)

C. Control panel

D. Internal controls

Notes:

• The number and type of shelves and configuration of

accessories may vary, depending on the model. All shelves and door

racks are removable.

• The appliance accessories are not suitable for washing in a

dishwasher.

• The internal temperatures of the appliance depend on the

ambient temperature, frequency of opening the doors, as well as

location of the appliance. Take these factors into consideration

when setting the thermostat knobs.

The anti-bacterial filter helps trap and kill airborne microorganisms

caught within it. Remove it from the box found in the crisper drawer

(item 4) and insert into the grille (item 9).

For any optimum performance of the antibacterial filter, replace the

filter every 6 months.

1. Remove the filter and dispose as a whole (grate box + insert).

2. Replace the filter and the grille with the new ones.

3. The replacement procedure is attached to the filter.

Our After-sales Service can supply this type of filter.

HOW TO OPERATE THE REFRIGERATOR

COMPARTMENT

Starting up the appliance

• Insert the plug into the mains socket.

• The appliance will switch on automatically unless knob (2) is on

position OFF.

• The inside light switches on when both doors are opened.

After plugging the subsequent controls are activated:

• The lamps on the control panels light up for 2 seconds.

It takes the refrigerator about 2 to 3 hours to reach the normal

operation temperature after turning on.

NOTE: Food products put inside the appliance before it achieved its

set operating temperature may spoil.

To adjust the internal

temperature (if necessary):

Turn the thermostat control knob

(2):

- Towards position 1 if the

temperature inside the

compartment is too cold.

- Towards position 7 for colder

temperatures.

- To position OFF to switch the

appliance off.

Recommended thermostat position: 3-4.

USING THE COOLER COMPARTMENT

(depending on the model)

The appliance is equipped with a cooler compartment.

To adjust temperature (if necessary), rotate the air regulator (4):

• Towards position (+) for cooler temperatures.

• Towards position (-) for less cool temperatures.

It is possible to remove the basket of the Cooler compartment.

USING THE FREEZER COMPARTMENT

• The freezer compartment starts operation as soon as the appliance

is plugged into the power outlet socket.

Attention:

• There is no need to adjust the thermostat knob as the temperature

is factory set to ensure the correct storage temperature for fresh

foods at ambient temperatures between +20°C and +25°C.

• After switching on, the freezer compartment takes approximately

3 hours to reach a suitable temperature for frozen food storage.

Vacation

This function turns the appliance to a warmer state if you

are going away for some time. To select the function, turn

the vacation symbol on both knobs. To turn the

refrigerator back to setting point repeat this procedure.

Important: after activating this function, remove all

perishable foodstuffs from the refrigerator compartment

and leave the door closed, since the refrigerator maintains

a suitable temperature to prevent the formation of

unpleasant odours.

To adjust the internal temperature

(if necessary):

Turn the thermostat control knob (1):

- Towards position 1 for less cold internal

temperatures.

- Towards position 3 for colder

temperatures.

- To position to use the fast freeze

function.

Recommended thermostat setting: 2-3.

How to freeze fresh food

1. 24 hours before freezing fresh food, turn the knob (1) to position

; When turning from 3 to pos. , the knob is slightly stiff and

the yellow indicator (3) near the symbol lights up.

2. Place food in the drawer, leaving enough space for air to circulate

around packs.

3. For more efficient freezing, turn the knob (2) to position 7.

4. Leave the fast freeze function activated for the next 24 hours

5. When freezing is complete, turn both knobs (1), (2) back to their

recommended positions.

CONTROL PANEL DESCRIPTION

On/Off buttons

1. Alarm resetting button.

2. Alarm indicator lamp.

3. Function selection button.

4. Party Mode function indicator lamp.

5. Fast Cooling function indicator lamp.

6. Anti-bacterial filter replacement indicator lamp.

7. Anti-bacterial filter alarm resetting button.

FUNCTION DESCRIPTION

Functions and settings

Other abnormal appliance operations

In case of abnormal appliance operation, a red alarm light will flash

and a beep will sound.

After pressing and holding the alarm deactivation “RESET” button,

the beep will stop and the indicator lamps (Party Mode, Fast Cooling,

Antibacterial Filter) will light up, allowing the user to determine the

alarm code (in accordance with the following table listing possible

alarm codes).

When several alarms occur simultaneously, the alarm with the highest

priority is displayed (the highest priority is alarm code 01).

When the “RESET” button is released, the red indicator lamp will

flash until the fault is eliminated.

If the sensor failure alarm is displayed (alarm code 01), the Party

Mode function is available until the fault is rectified. If the

potentiometer failure alarm is displayed (alarm code 02), the Party

Mode and Fast Cooling functions are available.

After determining the alarm code (from 01 to 03), the user:

• Can eliminate the reason of the code 03 alarm unaided by closing

the door.

• The other alarms (codes 01, 02) require contacting the

service and providing the alarm code.

REPLACING THE LIGHT BULB

Always disconnect the refrigerator from the power supply before

replacing any light bulb. If the inside light is not working, it is necessary

to:

1. Remove the light cover: put the fingers into the side ventilation

holes (1), stretch the cover gently and move it upwards.

2. Remove the bulb pulling it out of the holder (do not rotate).

3. Check the bulb and replace (if necessary) by pushing its terminals

into the holder sockets until it stops.

4. Replace the light cover or holder.

The appliance is equipped with a special push-in light bulb.

This bulb is available only from our After-Sales Service.

The bulb should not exceed 15W.

Do not leave uncovered the bulb.

Care and Maintenance

When cleaning, especially with the light cover removed, take

special safety precautions and do not touch the light bulb.

Alarm resetting (deactivation)

Party Mode: Activate this function before cooling

products in the freezer compartment. To activate this

function, press button Party Mode/Fast Cooling - 1

green LED lights up on the panel. After 30 minutes, the

LED will flash and a beep is heard. To reset the alarm press

button Party Mode/Fast Cooling - the green LED goes

off.

Fast cooling: Activate this function before cooling fresh

products in the refrigerator compartment. To activate this

function, press and hold for 3 seconds the Party Mode/

Fast Cooling button - green LED 2 lights up on the panel.

This function turns off automatically after 6 hours. To

deactivate this function earlier, press and hold for 3

seconds the Party Mode/Fast Cooling button - green

LED 2 goes off.

“Anti-Bacterial filter”- The antibacterial filter assures

maintaining a higher level of hygiene in the refrigerator by

continuously purifying the circulating air of bacteria. When

it is necessary to replace the filter, a yellow LED (6) lights

up. After replacing the filter, press and hold for 3 seconds

the Reset filter button (7) to deactivate the alarm.

Alarm type

Alarm

codes

Indicator Lamp on

Party

Mode

Fast

cooling

AntiBacterial

filter

Air sensor failure 01 NO NO YES

Potentiometer failure 02 NO YES NO

Open door alarm 03 YES NO NO

5019 637 01041

Whirlpool ARC7593/1 Program Chart

Brand: Whirlpool

Model: ARC7593/1

Category: Fridge-freezers

Type: Program Chart

This manual is also suitable for

Download PDF

report

Whirlpool ARC7593/1 Program Chart

This manual is also suitable for

Whirlpool ARC7593/1 Program Chart

Related papers

Other documents