Whirlpool ARC7593/1 Program Chart

ARC7593/1
Whirlpool
Brand
Whirlpool
Model
ARC7593/1
Category
Fridge-freezers
Type
Program Chart

This manual is also suitable for

PRODUCT SHEET
GB
Your new appliance is a combined ventilated, No-Frost fridge-
freezer exclusively for domestic use.
Whirlpool Total-no-frost fridge freezers circulate chilled air around
the storage areas, reducing humidity to prevent the formation of ice,
thereby completely eliminating the need for defrosting. Frozen items
don’t stick to the walls, labeling stays legible and storage space
remains neat and clear. No-Frost’s temperature control helps keep
food fresher for longer.
A. Refrigerator Compartment
1. Shelves / Shelf area
1a. Plastic “Dual” shelf (depending on the model)
2. Lighting
3. Cooler compartment (depending on the model)
4. Crisper drawers
5. Door trays
6. Separator (depending on the model)
7. Bottle rack
8. Rating plate
9. Antibacterial filter (depending on the model)
10. Air control (depending on the model)
B. Freezer Compartment
11. Upper basket (freezing zone)
12. Ice tray
13. Shelves (depending on the model)
14. Storage basket for frozen food items
15. Freezer compartment door
16. The freezer door trays for pizza or other frozen products with
short storage time (depending on model)
C. Control panel
D. Internal controls
Notes:
• The number and type of shelves and configuration of
accessories may vary, depending on the model. All shelves and door
racks are removable.
• The appliance accessories are not suitable for washing in a
dishwasher.
• The internal temperatures of the appliance depend on the
ambient temperature, frequency of opening the doors, as well as
location of the appliance. Take these factors into consideration
when setting the thermostat knobs.
The anti-bacterial filter helps trap and kill airborne microorganisms
caught within it. Remove it from the box found in the crisper drawer
(item 4) and insert into the grille (item 9).
For any optimum performance of the antibacterial filter, replace the
filter every 6 months.
1. Remove the filter and dispose as a whole (grate box + insert).
2. Replace the filter and the grille with the new ones.
3. The replacement procedure is attached to the filter.
Our After-sales Service can supply this type of filter.
HOW TO OPERATE THE REFRIGERATOR
COMPARTMENT
Starting up the appliance
• Insert the plug into the mains socket.
• The appliance will switch on automatically unless knob (2) is on
position OFF.
• The inside light switches on when both doors are opened.
After plugging the subsequent controls are activated:
• The lamps on the control panels light up for 2 seconds.
It takes the refrigerator about 2 to 3 hours to reach the normal
operation temperature after turning on.
NOTE: Food products put inside the appliance before it achieved its
set operating temperature may spoil.
To adjust the internal
temperature (if necessary):
Turn the thermostat control knob
(2):
- Towards position 1 if the
temperature inside the
compartment is too cold.
- Towards position 7 for colder
temperatures.
- To position OFF to switch the
appliance off.
Recommended thermostat position: 3-4.
USING THE COOLER COMPARTMENT
(depending on the model)
The appliance is equipped with a cooler compartment.
To adjust temperature (if necessary), rotate the air regulator (4):
• Towards position (+) for cooler temperatures.
• Towards position (-) for less cool temperatures.
It is possible to remove the basket of the Cooler compartment.
USING THE FREEZER COMPARTMENT
• The freezer compartment starts operation as soon as the appliance
is plugged into the power outlet socket.
Attention:
• There is no need to adjust the thermostat knob as the temperature
is factory set to ensure the correct storage temperature for fresh
foods at ambient temperatures between +20°C and +25°C.
• After switching on, the freezer compartment takes approximately
3 hours to reach a suitable temperature for frozen food storage.
Vacation
This function turns the appliance to a warmer state if you
are going away for some time. To select the function, turn
the vacation symbol on both knobs. To turn the
refrigerator back to setting point repeat this procedure.
Important: after activating this function, remove all
perishable foodstuffs from the refrigerator compartment
and leave the door closed, since the refrigerator maintains
a suitable temperature to prevent the formation of
unpleasant odours.
To adjust the internal temperature
(if necessary):
Turn the thermostat control knob (1):
- Towards position 1 for less cold internal
temperatures.
- Towards position 3 for colder
temperatures.
- To position to use the fast freeze
function.
Recommended thermostat setting: 2-3.
How to freeze fresh food
1. 24 hours before freezing fresh food, turn the knob (1) to position
; When turning from 3 to pos. , the knob is slightly stiff and
the yellow indicator (3) near the symbol lights up.
2. Place food in the drawer, leaving enough space for air to circulate
around packs.
3. For more efficient freezing, turn the knob (2) to position 7.
4. Leave the fast freeze function activated for the next 24 hours
5. When freezing is complete, turn both knobs (1), (2) back to their
recommended positions.
CONTROL PANEL DESCRIPTION
On/Off buttons
1. Alarm resetting button.
2. Alarm indicator lamp.
3. Function selection button.
4. Party Mode function indicator lamp.
5. Fast Cooling function indicator lamp.
6. Anti-bacterial filter replacement indicator lamp.
7. Anti-bacterial filter alarm resetting button.
FUNCTION DESCRIPTION
Functions and settings
Other abnormal appliance operations
In case of abnormal appliance operation, a red alarm light will flash
and a beep will sound.
After pressing and holding the alarm deactivation “RESET” button,
the beep will stop and the indicator lamps (Party Mode, Fast Cooling,
Antibacterial Filter) will light up, allowing the user to determine the
alarm code (in accordance with the following table listing possible
alarm codes).
When several alarms occur simultaneously, the alarm with the highest
priority is displayed (the highest priority is alarm code 01).
When the “RESET” button is released, the red indicator lamp will
flash until the fault is eliminated.
If the sensor failure alarm is displayed (alarm code 01), the Party
Mode function is available until the fault is rectified. If the
potentiometer failure alarm is displayed (alarm code 02), the Party
Mode and Fast Cooling functions are available.
After determining the alarm code (from 01 to 03), the user:
• Can eliminate the reason of the code 03 alarm unaided by closing
the door.
• The other alarms (codes 01, 02) require contacting the
service and providing the alarm code.
REPLACING THE LIGHT BULB
Always disconnect the refrigerator from the power supply before
replacing any light bulb. If the inside light is not working, it is necessary
to:
1. Remove the light cover: put the fingers into the side ventilation
holes (1), stretch the cover gently and move it upwards.
2. Remove the bulb pulling it out of the holder (do not rotate).
3. Check the bulb and replace (if necessary) by pushing its terminals
into the holder sockets until it stops.
4. Replace the light cover or holder.
The appliance is equipped with a special push-in light bulb.
This bulb is available only from our After-Sales Service.
The bulb should not exceed 15W.
Do not leave uncovered the bulb.
Care and Maintenance
When cleaning, especially with the light cover removed, take
special safety precautions and do not touch the light bulb.
Alarm resetting (deactivation)
Party Mode: Activate this function before cooling
products in the freezer compartment. To activate this
function, press button Party Mode/Fast Cooling - 1
green LED lights up on the panel. After 30 minutes, the
LED will flash and a beep is heard. To reset the alarm press
button Party Mode/Fast Cooling - the green LED goes
off.
Fast cooling: Activate this function before cooling fresh
products in the refrigerator compartment. To activate this
function, press and hold for 3 seconds the Party Mode/
Fast Cooling button - green LED 2 lights up on the panel.
This function turns off automatically after 6 hours. To
deactivate this function earlier, press and hold for 3
seconds the Party Mode/Fast Cooling button - green
LED 2 goes off.
“Anti-Bacterial filter”- The antibacterial filter assures
maintaining a higher level of hygiene in the refrigerator by
continuously purifying the circulating air of bacteria. When
it is necessary to replace the filter, a yellow LED (6) lights
up. After replacing the filter, press and hold for 3 seconds
the Reset filter button (7) to deactivate the alarm.
Alarm type
Alarm
codes
Indicator Lamp on
Party
Mode
Fast
cooling
AntiBacterial
filter
Air sensor failure 01 NO NO YES
Potentiometer failure 02 NO YES NO
Open door alarm 03 YES NO NO
5019 637 01041
  • Page 1 1
  • Page 2 2

Whirlpool ARC7593/1 Program Chart

ARC7593/1
Whirlpool
Brand
Whirlpool
Model
ARC7593/1
Category
Fridge-freezers
Type
Program Chart
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents