1of1
Assembly Instruction Sheet #IS-VVKY9658
For Styles VVKY9658BN and VVKY9658PN
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
,.
..
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
2015 Quoizel Inc.
July2015
A. Thread the Socket Assembly,
the Rod with Connector, the
Rod, the Column and the Base
together as shown. Hand
tighten until snug. Pull the
cordfromtheBaseasyou
assemble the parts together to
remove the excess cord
between parts.
B. Insert the Harp by pressing the
bottom ends of the Harp into
the Harp Clips.
C. Place the Shade onto the top
end of the Harp. Secure with
the Finial and hand tighten
until snug.
D. This fixture uses one standard
bulb (3-Way) with standard
screw base. Maximum150
watts. Three standard bulbs
with medium base . Maximum
75 watts. Insert bulb and
screw snugly into place.
Your fixture is now assembled
and ready to use. Enjoy!
Finial
x1
NOTE: ALL DIMENSIONS ARE ROUNDED UP
TO THE NEAREST 1/4"
(3) 75W
Bulbs
(Not Supplied)
Medium
Base
Base
x1
Pleasegoto forproduct cleaningtips. Goto the selection.
(3)A19MediumBase 75Wbulb Maximum,Alternatebulb(3) 19WCFLMaximum.
15-20minutes
Identifyand inspectall partsbefore beginninginstallation. Checkpackage contentlist anddiagrams belowto besure allparts are
present.If anyparts aremissing ordamaged, donot attemptto assemble,install, oroperate thefixture. Contactcustomer servicefor replacement
parts.
www.quoizel.com Care+ Maintenance
Estimated Assembly Time:
Preparation:
Tools Required: None.
LightSource: (1) A21Medium Base(3-Way)150W Maximum,Alternatebulb (1)CFL(3-Way)
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal. Do not subject
glass parts to any shock while in operation or shattering may result.
Socket
Assembly
x1
Rod with
Connector
x1
Cord
PART NUMBER REPLACEMENT
REQ.
NO.
1
2
19658PNVVKY
BASE
1
S12129FA
SHADE
1
1
2
FINISH: BRUSHED NICKEL
PALLADIAN BRONZE
VVKY9658BN
VVKY9658PN
Shade
x1
Column
x1
Socket
STYLE NUMBER
1
2
19658BNVVKY
BASE
1
S12130FA
SHADE
1
VVKY9658PN
VVKY9658BN
10” Dia.
60”
16” Dia.
13” Dia.
10”
A19 Bulb
(1) 150W
Bulb (3-Way)
(Not Supplied)
Medium
Base
A21 Bulb
Switch
Harp
X1
Harp Clip
Rod
x1