Quoizel, Inc.
6 Corporate Parkway
Goose Creek, SC 29445
Customer Service
Phone 631.273.2700
Fax 631.231.7102
www.quoizel.com
Warnings and Cautions
1of2
Assembly Instruction Sheet #IS-TF878T
For Style TF878T
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
,.
..
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
2014 QuoizelInc.
March2014
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal. Do not subject
glass parts to any shock while in operation or shattering may result.
Package Contents
B
Shade
x1
Care of Tiffany Style Shade
A new tiffany lamp shade has an oil film applied to the shade that protects the tiffany shade from scratches during shipment. If the oil applied is
too heavy you can remove the excess oil film with a paper towel. Gently wipe away the excess oil.
For general cleaning of tiffany shades use a gentle lemon oil-based furniture polish applied to a soft cloth and wipe gently.
If a white powder appears on the soldered joints of the tiffany shade this is a normal oxidation process. Use a small amount of lemon oil or
mineral oil applied directly to oxidized areas and the soldered area will return to like new.
STEP 1 Install Socket Assembly and Base together-
A. Pass the Base (K), Lock Washer (L) and Spring Washer (M) through
the Nipple on the Column (J), secure by threading Wingnut (N) onto
the Nipple. Hand tighten until sung.
B. Thread the Socket Assembly (I) onto the Column (J), hand tighten
until sung.
Figure 1
A
Finial
x1
Big Knurled Nut
x1
Column
x1
D
J
ToolsRequired:None.
BulbRecommended:
EstimatedAssemblyTime:
Preparation:
(2)Medium Base75W Maximum,Alternatebulb (2) 19WCFL
10-15minutes
Identifyand inspectall parts beforebeginning installation.Check package contentlist anddiagrams
belowto besure all partsare present.If any partsare missingor damaged,donot attemptto assemble,install,or
operatethe fixture.Contact customer servicefor replacementparts.
E
Check Ring
x1
F
Small Knurled Nut
x1
Nipple with
Hex Nut
x1
G
Spacer
x1
H
I
Socket
Assembly
x1
Base
x1
K
Lock
Washer
x1
L
Spring
Washer
x1
Flat
Washer
x1
M
C
Wingnut
x1
N
I
J
K
L
M
N