PRO AQUA FC-PK-100E, PRO-100-E User manual

Hello! I am an AI chatbot trained to assist you with the PRO AQUA FC-PK-100E User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!

- 5 -

V2-0119

Replacement Filter Set: FC-PK-100E

To insure your system keeps performing at its best, only use original OEM Certied lters, untested lters

will reduce performance and void its warranty.

Before starting: Turn incoming water o then press and hold the PR button to relief the pressure in the

system. Ensure to place a bucket or rag to catch any splashing water.

Replacing Your Filters

Remove housing using the housing wrench by

turning the handle counterclockwise.

Remove the old lter and install the new lter.

Ensure to center the lter cartridge properly in the

housing.

Inspect the O-Ring on the housing for any

damage or cracks. Ensure the O-Ring is sitting

properly in the groove. Lubricate the O-Ring

and housing threads with silicone lubricant or

a food-grade lubricant.

Reinstall the housing by pushing the housing

up and at the same time turning the housing

clockwise. Ensure to keep the housing and

lter cartridge straight. Improper installation

will cause the lter cartridge to not sit proper-

ly in the housing and will prevent the housing

from closing all the way.

* Hand tighten. Do not overtighten housing.

PR BUTTON

STAGE 1

HOUSING

STAGE 3

HOUSING

STAGE 1

HOUSING

STAGE 3

HOUSING

STAGE 1

HOUSING

STAGE 3

HOUSING

1 2

3 4