Lithonia Lighting IB 632 MVH Installation guide
- Type
- Installation guide
This manual is also suitable for
Lithonia Lighting IB 632 MVH is an industrial lighting fixture designed for use in commercial and industrial applications. It is a high-output, energy-efficient fixture that provides excellent illumination for a variety of tasks. The IB 632 MVH is constructed of durable materials and is built to withstand the demands of industrial environments. It is easy to install and maintain, and it comes with a variety of mounting options to meet your specific needs. Some of the features of the IB 632 MVH include:
- High-output, energy-efficient LED technology
- Durable construction for industrial environments
Lithonia Lighting IB 632 MVH is an industrial lighting fixture designed for use in commercial and industrial applications. It is a high-output, energy-efficient fixture that provides excellent illumination for a variety of tasks. The IB 632 MVH is constructed of durable materials and is built to withstand the demands of industrial environments. It is easy to install and maintain, and it comes with a variety of mounting options to meet your specific needs. Some of the features of the IB 632 MVH include:
- High-output, energy-efficient LED technology
- Durable construction for industrial environments
I-BEAM
®
Installation Instructions
Lithonia Lighting
INDUSTRIAL VALUE STREAM
One Lithonia Way, Conyers, GA 30012
Phone: 800-315-4963 Fax: 770-981-8141
www.lithonia.com
Part Number: U21293
Revision Date: 10/2007
READ AND FOLLOW ALL SREAD AND FOLLOW ALL SAFETY INSTRUCTIONS!
SAVE TREAD AND FOLLOW ALL SAFETY INSTRUCTIONS!
SAVE THESE INSTRUCTIONS AND DELIVER TO OWNER
AFTER INSTALLATIONHESE INSTRUCTIONS AND DELIVER TO OWNER
AFTER INSTALLATIONAREAD AND FOLLOW ALL SAFETY INSTRUCTIONS!
SAVE THESE INSTRUCTIONS AND DELIVER TO OWNER AFTER INSTALLATION FETY INSTRUC-
TIONS!
SAVE THESE INSTRUCTIONS AND DELIVER TO OWNER
AFTER IREAD AND FOLLOW ALL SAFETY INSTRUCTIONS!
SAVE THESE INSTRUCTIONS AND DELIVER TO OWNER AFTER INSTALLATION NSTALLATION
WARNING
To reduce the risk of death, injury or property damage from fire, electric shock, cuts,
abrasions, falling parts, and other hazards:
• Service of the equipment must be performed by qualified service personnel.
• Installation and maintenance must be performed by a person familiar with the construction
and operation of this product and any hazards involved. All applicable codes and ordinances
must be followed.
• Read this document before installing, servicing, or maintaining this equipment or installing a
lamp. These instructions do not cover all installation, service, and maintenance situations. If
your situation is not covered, or if you do not understand these instructions or additional
information is required, contact Lithonia Lighting or your local Lithonia LIghting Distributor.
• Read and follow all warnings and instructions provided by the lamp manufacturer.
WARNING
Before installing, servicing, or maintaining this equipment, follow these general precautions.
To reduce the risk of electrocution:
• Make sure the equipment is properly grounded.
• Always de-energize the circuit and/or equipment before connecting to, disconnecting
from, or servicing the equipment.
To reduce the risk of fire:
• Keep material away that can burn from hot lamp.
• Make sure lamps are correctly installed.
• Use supply conductors with a minimum installation temperature rating as specified
on equipment.
To reduce the risk of personal injury from cuts, abrasions, or falling parts:
• Wear gloves to prevent cuts or abrasions from sharp edges when removing from
carton, handling and maintaining this equipment.
• Do not use abrasive materials, glass cleaners or other solvents on reflector or lens.
These substances may damage equipment and cause parts to eventually break and
fall.
• Do not install a damaged fixture.
CAUTION: Observe lamp manufacturer’s recommendations and restrictions on lamp operation,
including but not limited to ballast type, burning position, replacement and cycling. Use only lamps
that comply with applicable ANSI standards.
NOTICE: If lamp is marked it contains mercury. Follow disposal laws. See
www.lamprecycle.org
Lithonia Lighting, a division of Acuity Brands Lighting, Inc., assumes no responsibility for claims arising out of
improper or careless installation or handling of this product.
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
READ AND FOLLOW ALL SAFETY INSTRUCTIONS!
sAVE THESE INSTTRUCTIONS AND DELIVER TO OWNER AFTER INSTALLATION
READ AND FOLLOW ALL SAFETY INSTRUCTIONS!
SAVE THESE INSTRUCTIONS AND DELIVER TO OWNER AFTER INSTALLATION
I-BEAM
®
Installation Instructions
Lithonia Lighting
INDUSTRIAL VALUE STREAM
One Lithonia Way, Conyers, GA 30012
Phone: 800-315-4963 Fax: 770-981-8141
www.lithonia.com
Revision Date:10/2007
Part Number: U21293
TROUBLE SHOOTING
If this fixture fails to operate properly, check to make sure:
The Correct lamp is properly installed.
The fixture is wired correctly.
The lamp is not faulty.
The fixture is grounded correctly.
The line voltage at the fixture is correct.
I-BEAM INSTALLATION INSTRUCTIONS
INSTALLATION OF THIS FIXTURE IN ANY OTHER MANNER THAN WHAT IS INDICATED WITHIN THE SUPPLIED
INSTRUCTIONS WILL VOID ALL WARRANTIES.
These instructions are for NORMAL On/Off operations.
Remove fixture from packaging.
Ensure proper voltage will be supplied to the fixture. Check the fixture label on the carton for fixture voltage. FIXTURE
MUST BE GROUNDED BEFORE USE.
Picture #1
WIRING OF FIXTURE
1. Remove back access plate by removing 1 phillips screw. Retain the screw and
access plate for re-installation. (Picture #1)
Picture #2
2. Remove the twist tie and separate the wires.
(Picture #2)
Picture #3
3. Attach the conduit connector to the access plate in accordance with your local
electrical code. Push the wires through the knock out on the access plate and wire
to the supply wire as shown in (pictures #3 and #4.) Ensure wires are not being
pinched. Make all necessary wiring connections, observing proper voltage
and polarity.
Picture #4
4. Center the access plate to the back of the fixture. Re-attach the access plate.
I-BEAM
®
Installation Instructions
Lithonia Lighting
INDUSTRIAL VALUE STREAM
One Lithonia Way, Conyers, GA 30012
Phone: 800-315-4963 Fax: 770-981-8141
www.lithonia.com
Part Number: U21293
Revision Date: 10/2007
INSTALLING BATTERY PACK SUPPLIED WITH THE FIXTURE
NOTE: BATTERY PACKS SUPPLIED WITH 6 LAMP T5 LAMPS WILL NOT BE INSTALLED IN THE
FIXTURE. THE BATTERY IS EXTERNALLY MOUNTED ON THE BACK SIDE OF THE CHANNEL.
Battery unit comes with Pilot light / Test Switch connector disconnected to prevent shock and
battery discharge.
1. Plug positive end of battery wiring harness to positive end of fixture wiring harness. Harness is accessible through the
open hole on the back of the fixture.
2. Plug pilot light / test switch into battery.
3. Verify battery operation by engaging pilot light / test switch. If wired correctly, 1 lamp will illuminate.
Keeping battery in the battery box, secure box to back of channel with the 4 screws provided. Do not over tighten. Over
tightening will cause stripping and void all warranties.
I-BEAM
®
Installation Instructions
Lithonia Lighting
INDUSTRIAL VALUE STREAM
One Lithonia Way, Conyers, GA 30012
Phone: 800-315-4963 Fax: 770-981-8141
www.lithonia.com
Revision Date:10/2007
Part Number: U21293
WIRING INFORMATION
STANDARD WIRING
LAMP SWITCHING WIRING
-
1
-
2
-
3
-
4
Lithonia Lighting IB 632 MVH Installation guide
- Type
- Installation guide
- This manual is also suitable for
Lithonia Lighting IB 632 MVH is an industrial lighting fixture designed for use in commercial and industrial applications. It is a high-output, energy-efficient fixture that provides excellent illumination for a variety of tasks. The IB 632 MVH is constructed of durable materials and is built to withstand the demands of industrial environments. It is easy to install and maintain, and it comes with a variety of mounting options to meet your specific needs. Some of the features of the IB 632 MVH include:
- High-output, energy-efficient LED technology
- Durable construction for industrial environments
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Lithonia Lighting W70SPL 120 M6 Installation guide
-
Acuity Brands IBZ Installation guide
-
-
-
-
-
-
Lithonia Lighting VC150SL M6 Installation guide
-
-
Other documents
-
Acuity Brands Lithonia Lighting KSF Installation guide
-
Acuity Brands Lighting KAX LED Installation guide
-
Acuity Brands Lighting Lithonia HLF1 Installation guide
-
Acuity Brands Lighting Lithonia Lighting HLA LED Quick start guide
-
-
Juno JRIG4AD06LM30K90W4 Dimensions Guide
-
-
NGS IREADER3.0 Datasheet
-
-
Acuity Controls rPODB Installation guide
