Aplex AVS-502 User manual

AVS-500 Series

Mini-ITX, 7

th

Generation, Intel Core i3/i5/i7

Processor Machine Vision Fanless Box PC

User Manual

Release Date Revision

MAY 2019 V1.0

Aplex Technology, Inc.

15F-1, No.186, Jian Yi Road, Zhonghe District, New Taipei City 235,Taiwan

Tel: 886-2-82262881 Fax: 886-2-82262883 E-mail: aplex@aplex.com.tw

URL: www.aplex.com.tw

AVS-500 Series Machine Vision User Manual

1

Revision History

Reversion

Date

Description

1.0

2019/05/29

Official Version

AVS-500 Series Machine Vision User Manual

2

Warning!________________________

This equipment will generate, use and radiate radio frequency energy and if

not installed and used in accordance with the instructions manual, it may cause

interference to radio communications. It has been tested and found to comply

with the limits for a Class A computing device pursuant to FCC Rules, which is

designed to provide reasonable protection against such interference when

operated in a commercial environment. Operation of this equipment in a

residential area is likely to cause interference in which case the user with its own

expense will be required to take whatever measures may be required to correct

the interference.

Electric Shock Hazard – Do not operate the machine with its back cover removed.

There are dangerous high voltages inside.

AVS-500 Series Machine Vision User Manual

3

Packing List

Accessories (as ticked) included in this package are:

□ Adaptor

□ Driver & manual CD disc

□ Other.___________________(please specify)

AVS-500 Series Machine Vision User Manual

4

Safety Precautions

Follow the messages below to prevent your systems from damage:

◆ Avoid your system from static electricity on all occasions.

◆ Prevent electric shock. Don‘t touch any components of this card when

the card is power-on. Always disconnect power when the system is not

in use.

◆ Disconnect power when you change any hardware devices. For instance,

when you connect a jumper or install any cards, a surge of power may

damage the electronic components or the whole system.

AVS-500 Series Machine Vision User Manual

5

Table of Contents

Revision History…………………………………………………………………………………………………….1

Warning…………………............................................…………………………….……………………2

Packing List…………………………………….…………………………………………………....................3

Safety Precautions…………………………………….…………….…..……………………....................4

Chapter 1 Getting Started

1.1 Features……..…………………..………………………...…………………………..7

1.2 Specifications…..………………...………………………………………………….7

1.3 Dimensions……..…………………....……………………………………………...9

1.4 Brief Description of AVS-500 series..….…..…………………….……10

Chapter 2 Hardware

2.1 Motherboard Introduction…………………….....…………………….....13

2.2 Specifications…………………………..…………..………………………………13

2.3 Motherboard Dimensions….……..…………..……………………………16

2.4 Jumpers and Connectors Location……….……………………………...17

2.5 Jumpers Setting and Connectors…………..………………………..……19

Chapter 3 BIOS Setup

3.1 Operations after POST Screen…...……..……...…………………………42

3.2 BIOS Setup Utility……………………………..………………………………….42

3.3 Main Settings…………………………………..…..………………………………43

3.4 Advanced Settings………………………………………….…………………...44

3.5 Chipset Settings…………………………….………….………………………...55

3.6 Security Settings……..…………………………..……………….……………..92

3.7 Boot Settings………..………………….…….…………….……………………..94

3.8 Save & Exit Settings………………………..……………..…………………....95

Chapter 4 Installation of Drivers

4.1Intel® H170 Chipset……………………….…………………...……………98

4.2 Intel® HD Graphics 530 Chipset…..……………….……..……….…....100

4.3 Realtek ALC269 HD Audio Driver Installation……..……..……….104

4.4 Intel® Management Engine Interface………............................106

Chapter 5 Mounting Suggestions

5.1Din Rail Mount….….………....……………...………….………………109

5.2Wall Mount….….………....…………………..………….………………112

AVS-500 Series Machine Vision User Manual

6

Figures

Figure 1.1: Dimensions of AVS-500…..….……….………….…………………………...9

Figure 1.2: Dimensions of AVS-502……………….………….…………………………...9

Figure 1.3: Dimensions of AVS-504…….……….……….……………………………..10

Figure 1.4: Overview of AVS-500……….….…..……..………………………………….11

Figure 1.5: Overview of AVS-502………..….................…………………………….11

Figure 1.6: Overview of AVS-504………..…....................………………………….12

Figure 2.1: Motherboard ASB-M8172 Dimensions………..……………………..16

Figure 2.2: Jumpers and Connectors Location-Board Top……………………..17

Figure 2.3: Jumpers and Connectors Location-Board Bottom……………….18

Figure 5.1: Din Rail Mount of AVS-500…..….……….………….…………………..109

Figure 5.2: Din Rail Mount of AVS-502……………….………….…………………..110

Figure 5.3: Din Rail Mount of AVS-504…….……….……….……………………….111

Figure 5.4: Wall Mount of AVS-500……….….…..……..……………………………112

Figure 5.5: Wall Mount of AVS-502………..….................……………………….113

Figure 5.6: Wall Mount of AVS-504………..…....................…………………….114

AVS-500 Series Machine Vision User Manual

7

Chapter 1 Getting Started

1.1 Features

 Machine Vision Application System

 Intel 7

th

Gen. Core i3/i5/i7 Processor

 Fanless Design

 2 x 260-pin DDR4 SO-DIMM Memory

 9~36V DC Wide-ranging Power input

1.2 Specifications

AVS-500/502/504

System

CPU

Intel 7

th

Gen. Core i3/i5/i7 Processor

Chipset

SoC

Memory

2 x 260-pin DDR4 SO-DIMM memory, up to 32GB

Outside IO Port

Front I/O Ports

4 x USB 3.0 type A, 2 x USB 2.0 type A via TB-577, 1 x internal USB

dongle(Reserved for AVS-502/504 only)

2 x GbE LAN RJ-45

1 x RS-232/422/485 DB-9, Default RS-232, COM1

1 x RS-232 DB-9, COM2

1 x RS-422/485 for COM3, default RS-485

1 x RS-232 for COM4

1 x Audio line-out

1 x Mic-in

1 x VGA

1 x 8-bit GPIO 4 x in, 4 x out via TB-577

1 x 2-pin power switch connector

1 x Power button with light via TB-577

Storage Space

Storage

2 x 2.5” SATA3 HDD/SSD (Easy-swappable HDD tray)

Expansion

Expansion Slot

AVS-500: NA

AVS-502: 2 x PCI/PCIe slots

AVS-500 Series Machine Vision User Manual

8

AVS-504: 4 x PCI/PCIe slots

Power

Power Input

9~36V DC

Mechanical

Construction

Plating Titanium Gray Aluminum Heatsink and Black Steel Chassis

Mounting

Din Rail back side(option)/Wall Mount(option)

Dimensions

220 x 149 x 68 mm

Net Weight

AVS-500:3.1Kg

AVS-502:3.7Kg

AVS-504:4.1Kg

Environmental

Operating

Temperature

-20~60°C(for i3/i5 model)

-20~50°C(for i7 model)

Storage Temperature

-40~85°C

Storage Humidity

10 to 90% @ 40°C, non-condensing

Certification

CE / FCC Class A

Operating System

Support

Microsoft® Win10 IoT, Windows 7, Linux Kernel 4.15 ( Ubuntu 16.04.4 )

TPM

Infineon’s Trusted Platform Module (TPM 2.0) supports Windows 10 IoT

Only

AVS-500 Series Machine Vision User Manual

9

1.3 Dimensions

Figure 1.1: Dimension of AVS-500

Figure 1.2: Dimension of AVS-502

AVS-500 Series Machine Vision User Manual

10

Figure 1.3: Dimension of AVS-504

1.4 Brief Description of AVS-500 Series

AVS-500 series are fanless-design high-efficiency BOX PC, powered by Intel 7

th

Generation Core i3/i5/i7 processor and supports 2 x 260-pin DDR3 SO-DIMM up to

32GB memory. They come with 4 x USB 3.0 Type A, 2 x USB 2.0 Type A, 2 x LAN, 1 x

VGA, 4 x COM ports(with 2 reserved), 1 x audio line-out, and 1 x power button. They

support 2 x 2.5” SATA3 HDD space which is easy accessible design and 9~36V DC

wide-ranging power input. The models have up to 4 x PCI/PCIe slot for expansion.

The models are plating titanium gray aluminum heatsink and black steel chassis

design, and can be din rail-mounted and wall-mounted. The AVS-500 series work well

with our other products and they can provide an absolute easy way to perform

control maintenance.

AVS-500 Series Machine Vision User Manual

11

Figure 1.4: Appearance of AVS-500

Figure 1.5: Appearance of AVS-502

AVS-500 Series Machine Vision User Manual

12

Figure 1.6: Appearance of AVS-504

AVS-500 Series Machine Vision User Manual

13

Chapter 2 Hardware

2.1 Motherboard Introduction

ASB-M8172 is a non-standard industrial motherboard developed on the basis of Intel

H170, which provides abundant peripheral interfaces to meet the needs of different

customers. Also, it features dual GbE ports, 6-COM ports and two mPCIE

configuration. To satisfy the special needs of high-end customers, ASB-M8172 is

designed with 120-pin PCIe x 16 socket extension interface. The product is widely

used in various sectors of industrial control.

2.2 Specifications

Specifications

Board Size

200mm x 170mm x 1.6mm

CPU Socket

LGA 1151 Socket

CPU Support

Intel 6

th

/7

th

Core i3/i5/i7 Processor (up to 35W)

Intel® Core™ I3-6100TE, 2.70GHz 35W

Intel® Core™ I5-6500TE, 2.30GHz (up to 3.30 GHz) 35W

Intel® Core™ I7-6700TE, 2.40GHz (up to 3.40 GHz) 35W

Intel Pentium Processor G4400TE 2.30GHz 35W

Intel Celeron Processor G3900TE 2.30GHz 35W

Intel® Core™ I3-7101TE 3.40GHz 35W

Intel® Core™ I5-7500T 2.70GHz (up to 3.30GHz) 35W

Intel® Core™ I7-7700T 2.90GHz (up to 3.80GHz) 35W

Intel Celeron Processor G3930TE 2.70GHz 35W

Chipset

Intel H170

Memory Support

2 x SO-DIMM (260pins), up to 32GB DDR4 1866/2133 MHz FSB(6Gen)

2 x SO-DIMM (260pins), up to 32GB DDR4 2133/2400 MHz FSB(7Gen)

Graphics

Intel® HD Graphics 530(I3-6100TE/I5-6500TE/I7-6700TE)

Intel® HD Graphics 510(G4400TE/G3900TE)

Intel® HD Graphics 630(I3-7101TE/I5-7500T/I7-7700T)

Intel® HD Graphics 610(G3930TE)

Display Mode

1 x HDMI via HDMI Port

AVS-500 Series Machine Vision User Manual

14

1 x LVDS (18/24-bit dual LVDS) (option)

1 x VGA via DB15 or 2x6 pin header

1 x DVI-I via pin header

Support

Resolution

Up to 4096 x 2304 for HDMI

Up to 1920 x 1200 for LVDS (option)

Up to 2560 x 1600 for DVI-I

Up to 1920 x 1200 for VGA

Three Display

HDMI + DVI-I + VGA1/CRT1

HDMI + DVI-I + LVDS (option)

HDMI + LVDS + VGA1/CRT1 (option)

DVI-I + LVDS + VGA1/CRT1 (option)

Super I/O

Nuvoton NCT6106D

BIOS

AMI/UEFI BIOS

Storage

3 x SATA3.0 Connector (SATA1/SATA2/SATA3)(Bottom side)

1 x MSATA Connector 1 x mini PCI-express slot(MPCIE1, option)

Ethernet

2 x PCIe Gbe LAN, RJ45 via Intel I210AT

USB

4 x USB 3.0/2.0 stack ports for external

(USB 3.0: USB3-1/USB3-2/USB3-3/USB3-4)

(USB 2.0: USB2-1/USB2-2/USB2-3/USB2-4)

3 x USB 2.0 Pin header for MIO1 (USB9/USB12/USB13)

4 x USB 2.0 Pin header for MIO2 (USB7/ USB8/USB10/USB11)

1 x USB 2.0 internal for MPCIE1 (USB14)

1 x USB 2.0 internal for MPCIE2 (USB9)

Serial

1 x RS232/RS422/RS485 port, DB9 connector for external (COM1)

Pin 9 w/5V/12V/Ring select

1 x RS232 port, DB9 connector for external (COM2)

Pin 9 w/5V/12V/Ring select

1 x RS422/485 select header for internal MIO1 (COM3)

1 x RS232 select header for internal MIO1 (COM4)

1 x RS232 header for internal (COM5)

1 x RS232 header for internal (COM6), pin9 w/5V/12V/Ring select

Digital I/O

8-bit digital I/O by pin header (MIO2)

4-bit digital input

4-bit digital output

Battery

Support CR2477 Li battery by 2-pin header (1000mAh)

AVS-500 Series Machine Vision User Manual

15

Audio

Support Audio via Realtek ALC269Q-VC HD audio codec(option)

Support Line-out, Line-in, MIC-in by JACK (AUDIO1)

Line-in/Line-out/MIC by 2x6-pin header(F-AUDIO1)

Support a stereo Class-D Speaker Amplifier with 2 watt per

channel output power, by 1 x 4-pin header (SPK1)

Keyboard /Mouse

1 x PS2 keyboard/mouse by MIO2

1 x PS/2 keyboard

1 x PS/2 mouse

Expansion Bus

5 x PCI-express x1 extend by 4x20 pin socket(PCIE_4x1)

1 x PCI-express x16 extend by 4x30 pin socket(PCIE_16x1, GEN2)

1 x mini-PCI-express slot (MPCIE1, option)

1 x mini-PCI-express slot (MPCIE2)

1 x CRT 2x5 Pin header (VGA1)

Power

Management

DC 9~36V in via 3-pin Connector (input)

1 x DC 12V out via 2-pin Connector (output, option)

Switches and LED

Indicators

Power on/off switch by MIO1 and MIO2

Power LED status by MIO1 and MIO2

HDD LED status by MIO2

Reset switch by MIO2

External I/O Port

2 x COM Ports

4 x USB 3.0 Ports(stack)

2 x RJ45 GbE LAN Ports

1 x HDMI interface

1 x CRT interface

1 x Audio Port(Mic-in, Line in, Line out)

SIM

1 x SIM Card holder, 1 x 6-pin Wafer by SIM1(option)

TPM

Infineon’s Trusted Platform Module(TPM2.0, only support

Windows 10 IoT, option)

Temperature

Operating: -20℃ to 70℃

Storage: -40℃ to 85℃

Humidity

10% - 90%, non-condensing, operating

Power

Consumption

24V/2A(Intel I3-6100TE 2.30GHz Processor with 16GB DDR4/SSD)

EMI/EMS

Meet CE/FCC Part15 class A

AVS-500 Series Machine Vision User Manual

16

RoHS

2.3 Motherboard Dimension

(units :mm)

Figure 2.1: Motherboard ASB-M8172 Dimensions

AVS-500 Series Machine Vision User Manual

17

2.4 Jumpers and Connectors Location

Figure 2.2: Jumpers and Connectors Location- Board Top

AVS-500 Series Machine Vision User Manual

18

Figure 2.3: Jumpers and Connectors Location- Board Bottom

AVS-500 Series Machine Vision User Manual

19

2.5 Jumpers Setting and Connectors

1. SW1-2:

CMOS clear switch, CMOS clear operation will permanently reset old BIOS

settings to factory defaults.

SW1

CMOS

Pin2 OFF

NORMAL (Default)

Pin2 ON

Clear CMOS

Procedures of CMOS clear:

a) Turn off the system and unplug the power cord from the power outlet.

b) To clear the CMOS settings, use the switch to Pin2 on for about 3 seconds

then move the switch Pin2 off.

c) Power on the system again.

d) When entering the POST screen, press the <DEL> key to enter CMOS Setup

Utility to load optimal defaults.

e) After the above operations, save changes and exit BIOS Setup.

2. BAT1:

(1.25mm Pitch 1x2 wafer Pin Header) 3.0V Li Battery is embedded to provide

power for CMOS.

Pin#

Signal Name

Pin1

Ground

Pin2

VCC_RTC

3. SW1-1:

Switch, DC Power input setting, Power on/off button and Auto Power on switch

setting.

SW1

Function（DC input /DC_IN1）

Pin1 ON

Auto Power on (Default)

Pin1 OFF

Power on/Off button (option)

Page is loading ...

Aplex AVS-502 User manual

This manual is also suitable for

Aplex AVS-502 User manual

Related papers

Other documents