2. Home
  3. Do-It-Yourself tools
  4. Garden tools
  5. Lawnmowers
  6. Toro
  7. 48in Blower and Drive Kit, E-Z Vac Twin Bagger for TITAN Zero-Turn-Radius Riding Mower

Toro 48in Blower and Drive Kit, E-Z Vac Twin Bagger for TITAN Zero-Turn-Radius Riding Mower, 54in Blower and Drive Kit, E-Z Vac Twin Bagger for TITAN Zero-Turn-Radius Riding Mower, 60in Blower and Drive Kit, E-Z Vac Twin Bagger for TITAN Zero-Turn-Radius Riding Mower Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Toro 48in Blower and Drive Kit, E-Z Vac Twin Bagger for TITAN Zero-Turn-Radius Riding Mower Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
FormNo.3385-783RevA
48inBlowerandDriveKit
E-ZVac
™
TwinBaggerforTITAN
®
Zero-Turn-RadiusRidingMower
ModelNo.79340—SerialNo.313000001andUp
ModelNo.79340—SerialNo.314000001andUp
ModelNo.79341—SerialNo.314000001andUp
ModelNo.79341—SerialNo.313000001andUp
ModelNo.79342—SerialNo.313000001andUp
ModelNo.79342—SerialNo.314000001andUp
InstallationInstructions
Note:Determinetheleftandrightsidesofthemachinefromthenormaloperatingposition.
WARNING
CALIFORNIA
Proposition65Warning
Thisproductcontainsachemicalorchemicals
knowntotheStateofCaliforniatocausecancer,
birthdefects,orreproductiveharm.
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
ProcedureDescription
Qty.
Use
1
Nopartsrequired
–
Preparethemower.
2
Nopartsrequired
–
Removetheexistingbeltcoverandthe
dischargechute.
3
Nopartsrequired
–
Drillthebafehole.
4
Nopartsrequired
–
Removethebracketforthebeltcover.
Blowersupport1
Bafe
1
Bolt(5/16x1inch)
3
5
Flangenut(5/16inch)
5
Installthebafeandblowersupportfor
48inchmowerdecks.
Blowersupport1
Largebafe
1
Smallbafe
1
Bolt(5/16x1inch)
3
6
Flangenut(5/16inch)
5
Installthebafeandblowersupportfor
54inchmowerdecks.
Blowersupport1
Bafe
1
Cutoffbafe
1
Bolt(5/16x1inch)
5
Flangenut(5/16inch)
10
7
Carriagebolt(5/16x3/4inch)
3
Installthebafeandblowersupportfor
60inchmowerdecks.
©2014—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.Toro.com.
OriginalInstructions(EN)
PrintedintheUSA.
AllRightsReserved
*3385-783*A
ProcedureDescription
Qty.
Use
Pulleyassembly1
Shoulderbolt
1
Flangenut(5/16inch)
1
8
Metalbeltcover1
Installthepulleyassemblyandshoulder
bolt.
Blowerassembly1
Baggerbelt1
Spring
1
9
Plasticbeltcover1
Installtheblowerassembly,baggerbelt,
spring,andplasticbeltcover.
1
PreparingtheMower
NoPartsRequired
Procedure
Performthefollowingproceduretopreparethemowerfor
attachingtheblowerandnishingkit.
1.DisengagethePTO,movethemotioncontrolleversto
theneutrallockedposition,andsettheparkingbrake.
2.Stoptheengine,removethekey,andwaitforallmoving
partstostopbeforeleavingtheoperatingposition.
3.Repairallbentordamagedareasofthemowerdeck
andreplaceanymissingparts.
4.Cleanthemowerofanydebrisonthedeckorrearpart
ofthemowertoeaseinstallation.
2
RemovingtheExistingBelt
CoverandtheDischarge
Chute
NoPartsRequired
Procedure
Note:Cleantheareaaroundthebeltcoverbeforeremoving
it.
1.Lowerthemowerdecktothelowestheight-of-cut
position.
2.Loosentheright-hand,belt-coverbolts(Figure1).
Note:Forthe60inchmower-deckbeltcover,the
boltswillneedtoberemoved.
3.Removetheright-handbeltcover.
4.Removefastenerssecuringthedeectorassemblyand
existingcutoffbafetothedeck(Figure1).Retainall
fasteners.
5.For54inchmowerdecksonly,removethefasteners
pluggingtheforwardhole.(Figure1).
G020960
1
5
3
4
5
6
3
2
2
7
Figure1
1.Deectorassembly5.Locknut(existing)
2.Fasteners(existing),retain6.Forwardhole(54inch
mowerdecksonly)
3.Carriagebolt(existing)
7.Beltcover
4.Cutoffbafe(existing)
6.Storetherighthandbeltcoverandthedischargechute
forlateruse.Installthemwhenthebagger,blower,
andthepulleyareremoved.
2
3
DrillingtheBafeHole
NoPartsRequired
Procedure
Certain54inchand60inchmowerdecksneedasecondhole
toinstallthebafe.UseFigure2todetermineifyouhave
thesecondhole.Ifyouhavethesecondhole,gotothenext
procedure.
1.Fromthecenterofexistingslot,measureoverthe
correctdistanceasshowninFigure2.
2.Markandcenterpunchthepositionforthenewhole.
3.Drillanew3/8inchhole.
3,4
1 2
g020943
Figure2
1.Existingslot
3.Measure9.52cm(3-3/4
inches)for54inchmower
decks
2.Drill3/8inchhole4.Measure11.43cm(4-1/2
inches)for60inchmower
decks
4
RemovingtheBracketforthe
BeltCover
NoPartsRequired
Procedure
Note:Thisprocedureisforonlybeltcoverswithknobsas
showninFigure3.
1.Removetheknobandthebeltcoverfromthemower
deck(Figure3).
2.Removethebracketattachedtothemowerdeck(Figure
3).Savetheboltstomountthemetal-beltcover.
1
2
3
4
g026105
Figure3
1.Beltcover3.Bracket
2.Knob
4.Bolts(retain)
5
InstallingtheBafeand
BlowerSupportfor48inch
MowerDecks
Partsneededforthisprocedure:
1Blowersupport
1
Bafe
3
Bolt(5/16x1inch)
5
Flangenut(5/16inch)
Procedure
Thisprocedureisfor48inchmowerdecksonly.
1.Alignthebafesothebafestudsgothroughthefront
andtopmowerdeckholes.
2.Installthebafetothefrontofthemowerdeckwith
aangenut(5/16inch)(Figure4).
3.Installtheblowersupportandexistingcutoffbafe
tothetopofthemowerdeckwith3bolts(5/16x1
inch)and3angenuts(5/16inch).RefertoFigure4
3
forthecorrectpositionoftheblowersupportandthe
existingcutoffbafe.
4.Usingtheverticalstudinthebafe,installtheblower
supporttothemowerdeckwithaangenut(5/16
inch)(Figure4).
g021007
2
3
5
1
4
1
6
5
Figure4
1.Flangenut(5/16inch)4.Bafe
2.Blowersupport
5.Bolt(5/16x1inch)
3.Mowerdeck
6.Existingcutoffbafe
6
InstallingtheBafeand
BlowerSupportfor54inch
MowerDecks
Partsneededforthisprocedure:
1Blowersupport
1
Largebafe
1
Smallbafe
3
Bolt(5/16x1inch)
5
Flangenut(5/16inch)
Procedure
Thisprocedureisfor54inchmowerdecksonly.
1.Alignthelargebafesothebafestudsgothroughthe
frontandtopmowerdeckholes.
2.Installthelargebafetothefrontofthemowerdeck
withaangenut(5/16inch)(Figure5).
3.Installtheblowersupportandexistingcutoffbafe
tothemowerdeckwith3bolts(5/16x1inch)and
3angenuts(5/16inch).RefertoFigure5forthe
correctpositionoftheblowersupportandtheexisting
cutoffbafe.
4.Usingtheverticalstudinthelargebafe,installthe
bafeandblowersupportofthemowerdeckwitha
angenut(5/16inch)(Figure5).
5.Usingtheexistingnutandbolt,looselyinstallthesmall
bafetothemowerdeck(Figure5).
6.Rotatethesmallbafeuntilittouchesthelargebafe
andthefrontofthemowerdeck.
7.Tightentheexistingnutandbolt.
4
g020963
2 3
1
4
1
5
8
7
6
7
9
5
Figure5
1.Flangenut(5/16inch)6.Largebafe
2.Blowersupport7.Useexistinghardware
3.Mowerdeck
8.Smallbafe
4.Ifneeded,drilla3/8inch
holehereforthebafe
9.Existingcutoffbafe
5.Bolt(5/16x1inch)
7
InstallingtheBafeand
BlowerSupportfor60inch
MowerDecks
Partsneededforthisprocedure:
1Blowersupport
1
Bafe
1
Cutoffbafe
5
Bolt(5/16x1inch)
10
Flangenut(5/16inch)
3
Carriagebolt(5/16x3/4inch)
Procedure
Thisprocedureisfor60inchmowerdecksonly.
1.Installthecutoffbafetotheblowersupportwith2
carriagebolts(5/16x3/4inch)anda2angenuts
(5/16inch)(Figure6).
2.Alignthelargebafesothebafestudsgothroughthe
frontandtopmowerdeckholes.
3.Installthelargebafetothefrontofthemowerdeck
withaangenut(5/16inch)(Figure6).
4.Usingtheverticalstudinthebafe,installthebafe
tothetopofthemowerdeckwithaangenut(5/16
inch)(Figure6).
Note:Ifnecessary,removetheexistinghardware.
5.Installtheblowersupporttothemowerdeckwith4
bolts(5/16x1inch)and4angenuts(5/16inch)
(Figure6).
6.Installthebafeguardtothebafewithacarriagebolt
(5/16x3/4inch)andaangenut(5/16inch)(Figure
6).
7.Installthebafeguardtothemowerdeckwithabolt
(5/16x1inch)andaangenut(5/16inch)(Figure6).
5
1
2
3
4
5
1
1
7
8
9
9
1
6
4
g021354
Figure6
1.Flangenut(5/16inch)6.Ifneeded,drilla(3/8inch)
holehereforthebafe
2.Blowersupport
7.Largebafe
3.Cut-offbafe8.Attachbafeguardtothe
frontedgeofthemower
deck
4.Carriagebolt(5/16x3/4
inch)
9.Bolt(5/16x1inch)
5.Mowerdeck
8
InstallingthePulleyAssembly,
MetalBeltCover,andShoulder
Bolt
Partsneededforthisprocedure:
1Pulleyassembly
1
Shoulderbolt
1
Flangenut(5/16inch)
1Metalbeltcover
Procedure
1.Removethenutandwasherfromtherighthandmower
deckpulley.
2.Installthepulleyassemblytotherightmowerdeck
pulleywiththepreviouslyremovednut.Donotuse
thewasher.Savethewasheranduseitwhenthepulley
assemblyisremoved(Figure7).
3.Torquethenutto136–149N-m(100–110ft-lb).
G020961
4
Figure7
54inchmowerdeckshown
1.Existingpulleynut
3.Existingdeck(spindle)
pulley
2.Blowerpulley
4.Spindle
4.Forthemachineswithbelt-coverknobs(Figure3),
installtheboltsusedforthebracket.RefertoFigure9
tousetheboltheadsforthenewmetal-beltcover.
5.Installtheshoulderbolttotherearoftheslotinblower
assembly.Securetheshoulderboltwithaangenut
(5/16inch).
6
g020773
1
2
3
Figure8
1.Blowerassembly
3.Shoulderbolt
2.Flangenut(5/16inch)
6.Installthemetalbeltcoverovertheexistingboltheads
onthemowerdeck.
7.Slidethemetalbeltcoverforwardsothefronttabsare
intheslotsandtheboltheadsslideintothekeyslots
(Figure9).
1
2
3
g021338
Figure9
1.Metal-beltcover3.Fronttabsslideintoslots
2.Boltheads
9
InstallingtheBlower
Assembly,BaggerBelt,
Spring,andPlasticBeltCover
Partsneededforthisprocedure:
1Blowerassembly
1Baggerbelt
1
Spring
1Plasticbeltcover
Procedure
RefertotheBaggerOperator’sManualforthecorrectprocedure
toinstalltheblowerassembly,baggerbelt,spring,andbelt
covers.
7
/