2. Western
  3. Baffle Replacement Kit

Western Baffle Replacement Kit Installation guide

  • I have reviewed the baffle replacement instruction document and am ready to assist you with any questions you may have. This document provides step-by-step instructions on how to replace a baffle on a chute assembly, including grinding, drilling and installation procedures. Let me know how I can help.
  • What is the first step in the baffle replacement process?
    How many holes should be drilled into the chute?
    What should be done after installing the new baffle?
June 9, 1999
Form No. 68819
BAFFLE REPLACEMENT INSTRUCTIONS
Copyright© 1999 Douglas Dynamics, L.L.C. All rights reserved. This material may not be reproduced or copied in whole or in part, in
any printed mechanical, electronic, film or other distribution and storage media, without written consent of the company. Authorization
to photocopy items for internal or personal use by the companys outlets is granted.
The company reserves the right under its product improvement policy to change construction or design details and furnish equipment
when so altered without reference to illustrations or specifications used herein.
Printed in USA
1. Grind off the old baffle and hinge from the chute assembly.
2. Align the new baffle and clamp it in place.
3. Using the new hinge as a template, drill two 11/32 holes in the chute.
4. Install the baffle with the supplied hardware and remove the clamps.
5. Repaint as required.
DRILL HOLES HERE
REPLACEMENT BAFFLE
CHUTE ASSEMBLY
/