2. Golden Lighting
  3. 2114-BA1 PW-OP

Golden Lighting 2114-BA1 PW-OP Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Golden Lighting 2114-BA1 PW-OP Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
IMPORTANT:
• ALLINSTALLATIONWORKSHOULDBEDONEBYACCREDITEDPROFESSIONAL.
• SHUTOFFPOWERSUPPLYATFUSEORCIRCUITBREAKER!
• USEONLYTHESPECIFIEDBULBS.DONOTEXCEEDTHEMAXIMUMWATTAGE!
CONNECTING THE WIRES
4.Attachthexture’swirestothepowersupplywiresfromthejunctionbox.Connectblacktoblack(orsmooth);whitetowhite(or
ribbed);groundtoground(greenorcopper).Twisttheendsofthewirepairstogether,thentwistonawireconnector.Makesure
alltwistsareinthesamedirection.Ifthereisnogroundwire(greenorcopper)fromthejunctionbox,locategroundscrew(E)on
mountingstrap(B)andwrapthexture’sgroundwirearoundthegreengroundscrew(E).Useascrewdrivertosecuregroundscrew
(E)ontothemountingbracket.Tuckallwiresneatlyintothejunctionbox.
FINISHING THE INSTALLATION
5.Placethexture’sbackplate(F)overmountingstrap(B)sothatmountingscrews(D)protrudethroughtheholesinbackplate(F)
andtwistdecorativenuts(G)ontothethreads.Twistuntilthebackplateofthextureissnugagainstthewall.
6.Slideglass(I)overthesocket(H)andsecuretheglassinplacewithsocketring(J).
Installalightbulb(notincluded)inaccordancewiththexture’sspecications.Donotexceedthemaximumrecommendedwattage.
Yourinstallationisnowcomplete.Turnonthepowerandtestthexture.
For Customer Service, please
contact the place of purchase.
AssemblyInstructions:2114-BA1 (Cadence)
CLEANING TIPS
Treat the xture gently! Regular cleaning will reduce the need for deep cleaning. For regular cleaning, turn off the light and wipe down the
xture with a clean lint-free cotton or microber cloth. Never spray cleaner directly onto the xture.
PREPARING FOR INSTALLATION
Removeallofthecontentsfromthecarton.See
theimportantnotesabove.Shutoffthepowerat
thecircuitbreakerandcompletelyremovetheold
xturefromthewall,includingtheoldmounting
strap.
1.Mountingstrap(B)hasmountingscrews(D)
attached.Youmayneedtotightenhexnuts(C)
thatholdthescrewsinplace.Mountingstrap(B)
containsseveralpairsofthreadedholes.Find
thepairofholesthatmatchesthespacingof
theholesonthejunctionboxandyourxture’s
backplate.
2.Pullthehousewiresthroughthecenterof
mountingstrap(B).
3.Securemountingstrap(B)tothejunctionbox
withmountingscrews(A)andascrewdriver.
Tightenthescrewssecurely.
House Wires
Fixture Wires
Hot
How to Identify the Fixture’s Wires
Hot Neutral Ground
Smooth
Ribbed
Bare Metal,
Green, or
Green Inner
Thread
Black
White
Black Inner
Thread
White Inner
Thread
G
H
I
J
B
C
A
ED
F
/