ANCEL FX2000 Vehicle OBD2 Scanner Automotive Car Code Reader Check Engine ABS SRS Transmission Diagnostic Scan Tool Installation guide

  • Hello! I am an AI chatbot trained to assist you with the ANCEL FX2000 Vehicle OBD2 Scanner Automotive Car Code Reader Check Engine ABS SRS Transmission Diagnostic Scan Tool Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
FX2000 Update
There are 2 methods to upgrade the FX2000 scan tool, we would
recommend method 2(Via TF card) which is easier than the method 1( Via
USB Cable). And please check the upgrade video first on our official
website before upgrade, it will help you a lot.
The upgrade guide following:
Step 1: Before starting the upgrade, please connect a computer to this device via
its USB, enter the device’s screen menu "Help--Tool- Information" and take a photo
to record the information displayed. (It supports WIN XP, 7, 8, 10 laptop.)
Step 2: Link to the website:
https://www.anceltech.com
Step 3: Please extract the file:
It must be the (WinRAR.rar) convert into a (file folder), and open the
FX2000V1.01.000 Update file folder.(It’s very important. If you don't do this,
you will not be able to upgrade the device)
Step 4: Click the software and install the update tool.
(1)
(2)
Step 5: Please try to find this software on your computer and open client
software “Product Update Tool”.
Step 6: When you see this page, insert the TF card into its reader,then contact
the TF card reader to your PC port, it will read the "Serial Number" automatically,
you don't need to type it.
Step 7: Hit [Device Upgrade] and move to the register page, type your email
address and Register Code (check the Register Code on the picture you have
taken before.), then hit [Submit].
Note:
"Register Code" is equal to "user password",you don’t need to create
any password by yourself.
Step 8: Choose “Select All” and click [Download] to start downloading.
Step 9: Once all steps complete, reinsert the memory card into the device and
power the device via USB cable or OBD2 cable.
If the screen doesn’t show any reaction, please disconnect the USB cable,
and try it again.
Step 10: A new version information page on the screen like below photo.
Note: The upgrade profile has already downloaded in the memory card,so
just hit the “NO-ESC” button to enter the diagnosis menu.
Finally, if you have any question, please do not hesitate to contact us,
and please be assured that we will be here to help you.
/