JAG PLUMBING PRODUCTS 14-903, 14-906, 14-908, 14-910 Installation guide

Hello! I am an AI chatbot trained to assist you with the JAG PLUMBING PRODUCTS 14-903 Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!

REV 05/04

1. Place Rubber Washer onto Escutcheon.

2. Place Escutcheon into tank square hole. The U-channel

opening should point to 10 o'clock and 6 o'clock positions.

3. Slide Brass Washer onto Escutcheon's thread.

4. Place Brass nut counter-clockwise onto Escutcheon's thread.

Tighten securely.

5. Insert Brass Rod into Escutcheon's U-channel. Rod's bend

should point downward to the 6 o'clock position.

6. Place Handle onto Brass Rod's splined shaft. Handle should

point downward to the 6 o'clock position. Push Handle and

Brass Rod together to seat.

7. Place a drop of thread locker (not supplied) onto #2 Screw thread

near thread's end. Attach #2 Screw to Handle and then tighten securely.

NOTE: Suggested thread locker LOCTITE 241.

Brass Rod

U-channel

Splined Shaft

Thread Locker

Rubber Washer

Escutcheon

Handle shown w/ (#01 Inlay)

#2 Screw

Brass Washer

Brass Nut

Dartmouth & Carrollton

Trip Lever Installation - THU141