Installation Guide
SATA Port
SATA Data and
Power Connector
Package content
Remove the back panel
1.
Slide the tray out
2.
Connect the SATA connector
4.
Insert the 5.25" device
3.
6.
Screw the drive firmly
Align the device to the front edge
5.
Slide the tray back into enclosure and install the back panel
7.
Copyright © 2016 Vantec Thermal Technologies. All Right Reserved. All Registered Trademarks Belong To Their Respective Companies.
Model: NST-536S3-BK
Information in this document is subject to change without notice.
Reproduction of these materials in any manner whatsoever without written permission is strictly forbidden.
Printed in China
Printed on Recycled Paper.
8
Power Cable
9
USB 3.0 Cable
External 5.25” Optical Drive Enclosure
USB 3.0 External Interface
10
PowerSwitch
Connect power cable
8.
Connect USB cable
9.
Turn on the power
10.
The computer will automatically detect the device
11.
Ready to use
12.
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Antec Dark Fleet DF-85 User manual
-
Thermaltake Urban S41 User manual
-
Antec P183 V3 User's User manual
-
Thermaltake Level 10 GTS User manual
-
Antec P193 V3 User manual
-
-
HP Compaq Pro 6305 Microtower PC User guide
-
Thermaltake Urban S71 User manual
-
-