QuietWarmth QWARM3X10F120 Installation guide

Type
Installation guide
Alternatively, you can use
the notch method. Cut/chisel
a notch in the bottom plate
to allow clearance for Lead and
Sensor Wires.
Lead Wire
Conduit
Conduit to
Thermostat
Sensor Wire
Conduit
Thermostat
Junction
Box
Connection
Junction
Box
Wall Stud
Wall Stud
Romex
12/2
Conduit
To Bottom Plate
Leads From
Elements
Leads From
Elements
Sensor
Wire
NOTE: Drill into Base Plate
as needed to allow Lead
and Sensor Wires to be
run to Thermostat
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28

QuietWarmth QWARM3X10F120 Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI