Emac ND20312 User manual

Brand: Emac

Model: ND20312

Type: User manual

R03.001_19/05/2010

TECHNICAL FILE

Novopeldaño® 1p

Novopeldaño® 1p in a stair nosing profile for steps which is made

with PVC and a solid base of Aluminum. Its visible side acts as a slip-

resistant element and increases the safety of stair edges. This prole

perfect to be installed in places with high transit. It is available in

several nishes

General features

Material: Aluminum + PVC

Length: 2.5 l.m. (8ft2in)

Dimensions: h: 8, 10, 12.5 mm. (5/16, 3/8, 1/2”)

a: 27 mm. (1 1/16”)

Packaging: 15 u./box

Finishes:

01- White

02- Grey

03- Beige

108- Leather

52- Anthracite

48- Cotto brown

Page 1 of 3

Applications

Novopeldaño® 1p is a prole designed to be placed as a stair nosing. Its striated face side helps to fulll

with the DB-SUA (Basic Document of Security in usage and Accessibility) from CTE (Spanish Technical

Building Code) because improves the value of slip resistance of the oor where it is installed.

The Technical Guide of Accessibility in building 2001, also recommends the installation of visual and

tactile elements at the beginning and the ending of stairs to favor the accessibility of people with

reduced visibility.

Novopeldaño® 1p is ideal for public areas such as airports, hotels, hospitals, etc. and for its installation

in homes. Its easiness of placement, without need of work, makes it specially indicated for reform

works and facilities improvements.

Materials

Aluminum Novopeldaño® 1p is a prole made by extrusion of aluminium. Lacquered nish obtains a high quality

and homogeneus surface. The lacquering has the quality seal Qualicoat, which guarantees the quality

of the process and the nal products.

The aluminium is a material with excellent chemical, physical and mechanical properties. It is lightweight,

tough, ductile, malleable and highly durable.

PVC

PVC (polyvinyl chloride), is a polar amorphous thermoplastic polymer highly resistant to abrasion,

corrosion and a wide range of chemical products. Has a good resistance to impact, low water absorption,

low electrical conductivity and is dimensionally stable.

*Find out more information by consulting the Technical Files of materials in www.emac.es

R03.001_19/05/2010

TECHNICAL FILE

Novopeldaño® 1p

Page 2 of 3

Comparison chart R

and Class

Flooring Initial class of ooring

Flooring +

Novopeldaño® 1p

Flooring class +

Novopeldaño® 1p

15 - 32,5 1 17,7 - 35 1

32,5 - 35 1 35 - 37,5 2

35 - 41,7 2 37,5 - 45 2

41,7 - 44,4 2 45 - 48,1 3

Clase 1

Clase 0

Clase 2

Clase 3

32,5 41,7

Performance of slip resistance

Novopeldaño® 1p

ooring + Novopeldaño® 1p

Flooring

* In this graph you can see the comparison between the Rd of the ooring without Novopeldaño® 1p and the Rd of the

ooring with the prole installed. The different areas that conform different classes have been delimited to see clearly the

improvement obtained of Rd and of ooring class.

* With the help of this chart you can know the Rd and the class of the ooring which will result due to the installation of

Novopeldaño® 1p as stair nosing. You can compare the values obtained respecting to the ooring without the prole installed.

Values marked in green will identify those values whose improvement has meant an increasing of the class of the ooring.

Slip Resistance project developed in collaboration with:

TECHNICAL FILE

R03.001_19/05/2010

Technical information

Emac Complementos S.L. (Spain) info@emac.es // Emac America L.L.C. (FL,USA) [email protected] // Emac Italia S.R.L. (Italy) [email protected]

www.emac.es

You can nd out more information about the technical features of Emac®’s products by downloading

their Technical File from www.emac.es

If you have any query please contact our Technical Department in [email protected]

The data provided are for information only and have been obtained by our supplier or Emac®.

Does not constitute legal guarantee in terms of properties and / or functionality of the application of material

Novopeldaño® 1p

Page 3 of 3

IndoorsOutdoors Flooring Recyclable

Placement

2 3 4 5

1. Spread a big amount of gripping material on the riser.

2. Place the tile on the riser and press to an optimal adherence.

3. Then, spread a big amount of gripping material on the tread and align the prole on its vertex (Do

not let overhang, the leverage may remove the step and the tiles). Then press for material to pass

through the mechanized holes of the xing wing.

4. Place the tile on the tread, align it to the prole and ensure a perfect adhesion.

5. Clean the possible remaining material, remove the protective lm and let dry.

Cleaning and maintenance

This product must be cleaned periodically with a soft cloth. If you use a neutral liquid cleaner, you must

rinse the prole with cold water and dry it to remove the humidity excess. The persistent dirtiness can

be removed by using cleaning approved agents lightly abrasive or a grid covered with polished powder

neutral. If a preserving agent is applied, as well as keep a very thin layer of water repellent, note that it

can’t be yellow,attract dust or dirt or have iridescent effects.

Steel wool, abrasive cleaners, souring products as well as strong acids (hydrochloric and

perchloric),strong bases (caustic soda or ammonia) or carbonated solutions are not recommended.

Citric acid is neither recommended because disolves the protective layer of the surface of aluminium.

Waxes, petrolatum, lanolin or similar substances are not appropriate. Solvents containing haloalkanes

(hydrouoroether and chlorinated solvents) and curing accelerators containing chlorides should not be

used (use special accelerators free of chlorides).

Emac ND20312 User manual

Emac ND20312 User manual

Related papers

Other documents