TECHNICAL FILE
R03.001_25/06/2010
You can nd out more information about the technical features of Emac®’s products by downloading
its Technical File in www.emac.es.
If you have any query, please contact our Technical Department in tecnico@emac.es.
Technical information
Emac Complementos S.L. (Spain) info@emac.es // Emac America L.L.C. (FL,USA) [email protected] // Emac Italia S.R.L. (Italy) [email protected]
www.emac.es
The data provided are for information only and have been obtained by our supplier or Emac®.
Does not constitute legal guarantee in terms of properties and / or functionality of the application of material
Novonivel® Aluminum
Page 2 of 2
1. Spread a big amount of gripping material on the surface where you will install the prole.
2. Then, place the prole and press it to let gripping material pass through the mechanized holes of
the xing wing.
3. Place a tile on the xing wing and press it to achieve an optimal contact with the gripping material.
4. Repeat the process, placing tiles along the xing wing of the prole.
5. Finally, clean the remaining material and let dry.
Placement
To see the video, capture this
image with your mobile phone
(software QR code reader is
necessary)or click on it.
1 2
3
4 5
Cleaning and maintenance
The product must be cleaned periodically with a soft mop. If you use a neutral liquid cleaner, you must
rinse the prole with cold water and dry it to remove the humidity excess. The persistent dirtiness can
be removed by using cleaning approved agents lightly abrasive or a grid covered with polished powder
neutral.
Steel wool, abrasive cleaners, souring products as well as strong acids (hydrochloric and
perchloric),strong bases (caustic soda or ammonia) or carbonated solutions are not recommended.
Citric acid is neither recommended because disolves the protective layer of the surface of aluminium.
Waxes, petrolatum, lanolin or similar substances are not appropriate. Solvents containing haloalkanes
(hydrouoroether and chlorinated solvents) and curing accelerators containing chlorides should not be
used (use special accelerators free of chlorides).
Indoors Outdoors
Floorings
Recyclable
The aluminium is a material with excellent chemical, physical and mechanical properties. It is lightweight,
tough, ductile, malleable and highly durable.
-
1
Emac NVA1338 User manual
- Type
- User manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Apple eMac User manual
-
Dave Embedded Systems diDo User manual
-
Spring Switzerland GmbH 2000 User manual
-
Mackie DFX6 User manual
-
Texas Instruments EMAC Implementation for the TMS320C6472/TMS320TCI6486 (Rev. A) Application notes
-
-
ZiLOG EZ80F91AZA Product User Guide
-
Tascam CFX MKII Series Owner's manual
-
-
