Minolta Di151 Owner's manual

Di151 IVZ-1

Table of Contents

1 Introduction

1.1 We want you to be a satisfied customer.....................................1-1

1.2 Protecting the Environment . . ....................................................1-2

Takeback and Reutilization.............................................................1-2

What is Energy Star®? ...................................................................1-2

Use of Recycled Paper...................................................................1-2

1.3 Guide to this Manual.....................................................................1-3

How is this Manual Structured?......................................................1-3

A Brief Explanation of the Conventions used in this Manual...........1-4

A Brief Explanation of Important Concepts and Symbols ...............1-6

2 Getting to Know Your Copier

2.1 System Overview ..........................................................................2-1

Di151 Copier...................................................................................2-1

Extended Memory (Optional).........................................................2-3

Printer Controller Pi1501 (Optional)................................................2-3

Fax Unit for Di151 (Optional) ..........................................................2-3

TWAIN Interface Driver (Optional)..................................................2-3

Automatic Document Feeder AF-8 (Optional).................................2-4

Paper Drawer PF-116 (Optional) ....................................................2-5

2.2 The Safe Use of Your Copier........................................................2-6

Laser Safety..................................................................................2-10

Internal Laser Radiation................................................................2-10

Safety label ...................................................................................2-12

Data on the Manufacturer's Name Plate.......................................2-15

2.3 Transporting the Copier.............................................................2-16

2.4 Setting Up the Copier .................................................................2-16

Environmental Requirements........................................................2-16

Installation Site..............................................................................2-16

Space Requirements of the Copier...............................................2-17

Storing Supplies............................................................................2-17

2.5 Connecting the Copier................................................................2-17

Voltage and Frequency Tolerances..............................................2-17

2.6 Switching the Copier On and Off...............................................2-18

Switching the Copier On ...............................................................2-18

Switching the Copier Off ...............................................................2-19

IVZ-2 Di151

2.7 Control Panel Keys and Indicators...........................................2-20

Control Panel Left Side ................................................................2-20

Control Panel Right Side ..............................................................2-22

Display Panel................................................................................2-23

2.8 Opening and Closing the Copier Cabinet ................................ 2-24

Opening the Copier Cabinet.........................................................2-24

Closing the Copier Cabinet........................................................... 2-24

2.9 Shutting Down the Copier .........................................................2-25

2.10 Please Observe these Precautions...........................................2-26

2.11 Proper Use of Your Copier ........................................................2-26

3 Initial Steps . . .

3.1 Making a Copy, Step by Step ......................................................3-1

3.2 Placing Originals on the Original Glass..................................... 3-4

Paper Originals and Transparent Originals....................................3-4

Books and Bound Originals............................................................ 3-5

3.3 Using the Automatic Document Feeder ..................................... 3-6

Automatic Document Feeder.......................................................... 3-7

3.4 Entering the Number of Copies................................................... 3-8

3.5 Starting the Copy Cycle...............................................................3-8

3.6 Stopping the Copy Cycle.............................................................3-9

3.7 Resetting the Copier to Initial Mode........................................... 3-9

3.8 Adding Paper..............................................................................3-10

Standard Paper Drawer – 250 Sheets..........................................3-10

Paper Drawer (Optional) – 500 Sheets ........................................3-12

3.9 Using the Single Document Feed Tray..................................... 3-13

What do the various messages shown on the display panel mean? 3-

13

How to Use the Single Document Feed Tray...............................3-14

Defining a Custom Paper Size .....................................................3-16

3.10 Changing the Development Unit...............................................3-18

3.11 Checking the Meter Count......................................................... 3-20

Viewing the status of the Total Counter........................................3-20

Viewing the Status of the Partial Counter..................................... 3-21

Di151 IVZ-3

4 How Would You Like Your Copy?

4.1 Setting the Exposure Mode..........................................................4-1

Toggling Auto Exposure..................................................................4-1

Manually Adjusting Copy Brightness...............................................4-2

Copying Photographs......................................................................4-3

4.2 User-defined Zoom Ratios ...........................................................4-4

Enlarging/Reducing Originals with Standard Ratios (Zoom)...........4-4

User-defined Zoom Ratios..............................................................4-5

4.3 Selecting Auxiliary Modes............................................................4-6

F1: Non-Sort....................................................................................4-7

F2: 2in1-Non-Sort............................................................................4-8

F3: Sort .........................................................................................4-10

F4: 2in1-Sort .................................................................................4-11

4.4 Selecting the Paper Drawer Manually.......................................4-13

4.5 Auxiliary Functions.....................................................................4-14

Auto Drawer Switching..................................................................4-14

Automatic Control Panel Reset.....................................................4-14

Energy Saver Mode ......................................................................4-14

5 User'sChoiceSettings

5.1 Configuring the User's Choice Settings.....................................5-1

5.2 Overview of the User's Choice Settings.....................................5-3

U1 – Auto Panel Reset....................................................................5-3

U2 – Energy Saver Mode ON .........................................................5-4

U3 – Energy Saver Mode OFF........................................................5-4

U4 – Exposure Mode Priority..........................................................5-4

U5 – Exposure Level for Auto Exposure Mode...............................5-5

U6 – Exposure Level for Manual and Photo Mode .........................5-5

U7 – Paper Size for Standard Paper Drawer..................................5-5

U8 – Paper Size for Single Feed Tray ............................................5-6

U9 – Exposure Level for Automatic Document Feeder...................5-8

U0 – Auxiliary Mode Priority............................................................5-8

UA – Drawer Priority .......................................................................5-9

Ub – Exposure Level in Printer Mode .............................................5-9

Uc – Drawer Priority in Printer Mode.............................................5-10

6 Troubleshooting

6.1 If You Are Not Satisfied with Your Copy . . ................................6-1

6.2 If a Message Appears on the Display Panel . . ..........................6-3

6.3 If Your Copier Is Not Working Correctly . . ................................6-5

IVZ-4 Di151

6.4 If a Malfunction Code Appears on the Display

Panel........................................................................................... 6-6

6.5 How to Clear a Paper Misfeed..................................................... 6-7

Clearing a Paper Misfeed at the Standard Paper Drawer..............6-7

Clearing a Paper Misfeed at the Paper Drawer (Optional).............6-9

Clearing a Paper Misfeed inside the Copier................................ 6-11

Clearing a Paper Misfeed at the Automatic Document Feeder ....6-15

7Appendix

7.1 Care of the Unit............................................................................. 7-1

Cleaning .........................................................................................7-1

Document Transport Belt................................................................ 7-1

7.2 Copier Maintenance ..................................................................... 7-2

7.3 Specifications ............................................................................... 7-3

Di151 Copier...................................................................................7-3

Automatic Document Feeder AF-8.................................................7-5

Paper Drawer PF-116.....................................................................7-5

7.4 Paper Size Tables......................................................................... 7-6

Metric..............................................................................................7-6

Inch Areas ......................................................................................7-6

7.5 Zoom Ratio Tables .......................................................................7-7

Metric..............................................................................................7-7

Inch Areas ......................................................................................7-7

7.6 CE Marking (Declaration of Conformity) .................................... 7-8

7.7 Certifications on the Manufacturer's Name Plate....................7-11

7.8 Directory of Abbreviations ........................................................ 7-12

7.9 Index............................................................................................ 7-13

Introduction

1

Di151 1-1

1 Introduction

1.1 We want you to be a satisfied customer

Thank you for choosing a Minolta Copier System.

To ensure the best performance and effective use of your copier, this

manual will provide information on the following topics:

G Getting to Know Your Copier

G Initial Steps . . .

G How Would You Like Your Copy?

G User's Choice Settings

G Troubleshooting.

Please read this manual carefully before using your copier and keep it

handy at all times. Store the manual in the holder on the rear side of the

copier.

For further information and assistance in the event of difficulties, please

contact:

G your Minolta Technical Representative;

G the Minolta Hotline, Tel.: 0800/6466582 (free of charge) and

G our Web site, http://www.minolta.com.

Please keep the serial number (located on the copier's rating plate) and

thecopier's date of purchase handy to ensure fast,accurate assistance in

the event of difficulties.

. . . because we want you to be a satisfied customer.

1

Introduction

1-2 Di151

1.2 Protecting the Environment . . .

Minolta supports the challenge maintaining the environment and does all

that it can to actively participate in preventing and resolving ecological

problems.Ourproductioniscertified withISO9000(qualitymanagement)

and ISO14001 (environment management).

Takeback and Reutilization

Used devices,empty toner and drum units andused toneranddrum units

aretaken back bya local MINOLTA partnerandreprocessed forrecycling

and reutilization of materials. For more information, call 0800/6466582

(free of charge).

What is Energy Star

®

?

After long periods of idleness, Energy Star

®

copiers switch to Energy

Saver Mode or turn themselves off. This allows a yearly decrease in

electricity costs of up to 60%.

Copierswithahighcopyingspeedautomaticallyswitchto 2-sidedcopying

mode. This reduces the costs for copy media and the volume of paper

consumed.

Did you know that manufacturing a sheet of paper requires 10 times as

much energy as making a copy?

The conservation of paper thus also has a direct global effect on the

conservation of energy.

This copier complies with the Energy Star

®

energy efficiency criteria.

Use of Recycled Paper

This unit is suited for processing recycled paper that meets the

requirements of ENV 12281 or DIN 19309. For details, consult your local

MINOLTA partner.

Introduction

1

Di151 1-3

1.3 Guide to this Manual

HowisthisManualStructured?

If you are not sure where to locate the information you need, please refer

to this section. The following table will help you. For detailed information

on specific issues, refer to the index at the end of the manual.

No. Chapter Description

1 Introduction Thischaptercontainsintroductoryinformation,

especially for the effective use of this manual.

2 Getting to Know Your

Copier

This chapter will familiarize you with your

copier and its features and provides you with

information on:

• Machine design

• Safe and reliable use of the copier

• Setting up the copier

• Connectingand switchingthe copier on and

off

3 Initial Steps . . . This chapter provides you with the knowledge

needed for using your copier, such as:

• Step-by-step instructions on copying your

documents

• Starting the copy cycle

• Stopping the copy cycle

• Filling the paper drawers

• Changing the toner cartridge

4 How Would You Like

Your Copy?

This chapter explains the effective use of the

copier's functions.

5 User's Choice Settings In this chapter you will learn how to customize

the default settings of the copier to suit your

needs.

6 Troubleshooting This chapter contains tables and instructions

to help you recognize faults and eliminate

malfunctions such as paper misfeeds.

7 Appendix The appendix contains a collection of useful

supplementary information such as:

• Care of the unit

• Specifications

• Paper Size and Zoom Ratio tables

• Index

1

Introduction

1-4 Di151

A Brief Explanation of the Conventions used in this Manual

A variety of conventions and types of illustrations are used for special

emphasis in this manual. The following examples show the most

important conventions and how to respond to them.

DANGER

This is a danger warning!

The danger warning points out a danger of potentially serious injury or

death. Not observing the danger warning can lead to serious personal

injury.

➜ The arrow marks the precautionary measure required to avoid the

danger.

WARNING

This is a warning!

The warning points out a hazardous situation for persons and/or

products. Not observing the warning can lead to personal injury and/or

serious damage to the unit.

➜ The arrow marks the precautionary measure required to avoid the

danger.

CAUTION

This is a caution!

Thecautionpoints outa potential and dangeroussituation. Not observing

the caution can lead to personal and/or machine damage.

➜ The arrow marks the precautionary measure required to avoid the

danger.

Introduction

1

Di151 1-5

[START] The button on the control panel labelled “Start“

ERROR Message on the display panel with the text ERROR

➜ Individual action to be performed

(no further steps)

A list begins:

G These bullets indicate a list.

G Lists with bullets are not in any specific order.

❍ Where a list with whitebullets follows a list withblack bullets, the white

bullets are ranked below the black bullets.

❍

G

This is the end of the list.

1

Step 1 of a sequence of

actions

2

Step 2 of a sequence of

actions

?

This is additional

assistance.

➜ The action described

here is sure to achieve

the results you desire.

3

Step 3 of a sequence of actions

❍ This bullet indicates a list within a sequence of actions.

❍

✎

This is a helpful hint

Texts highlighted in this manner contain useful little tips and tricks for

the copying process.

This will show you what needs to be done

1

Introduction

1-6 Di151

A Brief Explanation of Important Concepts and Symbols

Paper feeding direction, length and width, lengthwise and crosswise are

standard terms. They are defined below.

Original and Copy

The original is the document to be duplicated during the copy cycle.

Feeding Direction

The feeding direction is the paper's path through the copier. The feeding

direction is symbolized by the arrows in the following illustration.

Original

(document to be copied)

Copy

(duplicate of the original document)

Copy cycle

enlargement,

reduction

,

sorting,

Introduction

1

Di151 1-7

Width and Length

Whenever paper dimensions are specified in this manual, the first value

always refers to the width of the paper (side A) and the second to the

length (side B).

Lengthwise and Crosswise

If side A of the paper format is shorter than side B, this is referred to as

lengthwise.

If side A of the paper format is longer than side B, this is referred to as

crosswise.

21 x 29.7 cm

Length of the paper

(side B)

Width of the paper

(side A)

Lengthwise Crosswise

21 x 29.7 cm 29.7 x 21 cm

1

Introduction

1-8 Di151

Getting to Know Your Copier

2

Di151 2-1

2 Getting to Know Your Copier

2.1 System Overview

Di151 Copier

Outer System Overview

4

3

1

2

6

View from left View from right

5

Item Name Description

1 Copy Tray Receives the created copies

(max. 100 sheets of standard paper).

2 Standard Paper

Drawer

Holds up to 250 sheets of A4L or A5L paper

(L=lengthwise).

3 Manual Single Feed

Tray

Manually feeds in individual sheet originals of

various sizes and paper types.

4 Control Panel Provides the keys and displays used for

operating the copier.

5 Original Cover Holds the original in place on theOriginalGlass.

6 Power Switch Turns the copier ON and OFF.

2

Getting to Know Your Copier

2-2 Di151

Inner System Overview

WARNING

Danger of burns from the Heating Unit!

The Heating Unit may reach temperatures of up to 120°C.

➜ Never touch the Heating Unit.

➜ Do not touch the areas designated with this symbol: :.

View from right View from right

with opened copier cabinetwith opened original cover

2

1

3

4

5

Item Name Description

1 Unlatching the Copier

Cabinet

Reachintotherecess andpullthe latch toopen

the copier cabinet.

2 Original Glass Placethe original on the Original Glass with the

side to be copied face down.

3 Original Pad Holdstheoriginalin placeontheOriginalGlass.

4 Development Unit Contains the toner.

5 Heating Unit Affixes the toner onto the copy paper.

Getting to Know Your Copier

2

Di151 2-3

Extended Memory (Optional)

Expands the memory capacity of the copier.

If you copy material that requires high use of system memory, you may

want to increase the system memory of the copier, which allows the

system to process the data continuously.

The following extended memory units can be purchased

G 16MB Extended Memory

G 32MB Extended Memory.

Printer Controller Pi1501 (Optional)

Allows the copier to be used as a printer.

Fax Unit for Di151 (Optional)

Allows the copier to be used as a facsimile device.

TWAIN Interface Driver (Optional)

Allows the copier to be used as a scanner.

2

Getting to Know Your Copier

2-4 Di151

Automatic Document Feeder AF-8 (Optional)

Feeds the originals automatically.

32

1

5

4

Item Name Description

1 Document Feed Tray

Extender

Pull out this extender when copying large-size

originals.

2 Document Feed Tray Placethe originals on the Document Feed Tray

withthesidetobecopiedfaceup.

3 Document Guide Plate Slide the Document Guide Plate to match the

size of the original.

4 Paper Misfeed Door Open this cover to clear a paper misfeed in the

Document Feed Unit.

5 Document Exit Tray Receives originals ejected from the Document

Feed Tray.

Getting to Know Your Copier

2

Di151 2-5

Paper Drawer PF-116 (Optional)

Stores up to 500 sheets of 80 g/m

2

, A4L paper.

1

Item Name Description

1 Paper Drawer Holds up to 500 sheets of A4L paper.

2

Getting to Know Your Copier

2-6 Di151

2.2 The Safe Use of Your Copier

The improper use of your copier may result in health hazards, electrical

shock or evenfires. Please observe the following precautions for the safe

use of your copier.

DANGER

Incorrect use of the copier can result in fire and/or electrical shock!

Thecopierisequippedwithhigh-voltagecomponents.Incorrectuse ofthe

copier may result in fire or electrical shock. Observe the following safety

precautions to prevent injury and device damage.

➜ Never use flammable sprays, liquids or gasses near the copier.

➜ Never remove any safety equipment.

➜ Never make structural modifications to the copier.

➜ Never unplug the copier with wet hands.

➜ Ensure that the power supply provides the correct supply voltage for

the copier.

➜ Never connect the copier to a multiple-socket extension cord.

➜ Donotplace coffeecups,bottlesorothercontainerswithliquids onthe

copier. In the event that liquids are accidentally introduced into the

copier, switch the copier off immediately and then unplug the power

cord. Consult your Technical Representative.

➜ Never put staples or paper clips or any other metal objects into the

copier openings. In the event that metal objects are accidentally

introduced into the copier, switch the copier off immediately and then

unplug the power cord. Consult your Technical Representative.

Getting to Know Your Copier

2

Di151 2-7

DANGER

Incorrect handling of the power cable can result in fire and/or

electrical shock!

The copier is equipped with high-voltage components. Incorrect handling

of the copier's power cable may cause damage to the cable. This could

result in fire and/or cause electrical shock. Observe the following safety

precautions to prevent injury and device damage.

➜ Be sure that the power cable is not damaged. If this is not the case,

switch off the copier immediately and then unplug the power cord.

Consult your Technical Representative.

➜ Do not pull directly on the power cable itself when unplugging the

power cord from the power outlet.

➜ Do not move the copier unless it is unplugged.

➜ Never place heavy objects on the power cable.

➜ Do not pull or bend the power cable.

➜ Do not place the copier on cables belonging to other devices.

➜ Ensure that no cables of other devices get pinched in the copier.

➜ Be sure that the power cord sits correctly in the power outlet.

➜ Always make sure that the power outlet is visible and accessible at all

times.

➜ If an extension cable is needed, use one with a capacity that

corresponds to or exceeds the power consumption of the copier.

➜ Never connect the copier to a multiple-socket extension cord.

2

Getting to Know Your Copier

2-8 Di151

DANGER

Device overheating can result in fire and/or electrical shock!

The copier is equipped with high-voltage components. Incorrect use or

faulty operation of the copier may cause the unit to overheat.Observe the

following safety precautions to prevent injury and device damage.

➜ Switch the copier off immediately if it becomes unusually hot. Unplug

the power cord. Consult your Technical Representative.

➜ Switch the copier off immediately if smoke comes out of it. Unplugthe

power cord. Consult your Technical Representative.

➜ Switch the copier off immediately if it emits an unusual odor. Unplug

the power cord. Consult your Technical Representative.

➜ Always unplugthepower cordwhen thecopierisnot goingtobe used

for a long time.

CAUTION

External influences can cause damage to the copier!

External influences can cause damage to the copier. Observe the

following safety precautions to prevent device damage.

➜ Do not subject the copier to vibrations.

➜ Never bring any magnetized object near the copier.

➜ Never place objects of more than 3 kg on the copier.

Page is loading ...

Minolta Di151 Owner's manual

Minolta Di151 Owner's manual

Related papers

Other documents