Equinox Systems EQLED034 User manual

Equinox Systems
Brand
Equinox Systems
Model
EQLED034
Category
Stroboscopes & disco lights
Type
User manual

This manual is also suitable for

Order code: EQLED034
Quad Pix Batten
User Manual
www.prolight.co.uk Quad Pix Batten User Manual
2
Safety advice
WARNING
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CARE-
FULLY BEFORE YOUR INITIAL START-UP!
• Beforeyourinitialstart-up,pleasemakesurethatthereisnodamagecausedduringtransportation.
• Shouldtherebeanydamage,consultyourdealeranddonotusetheequipment.
• Tomaintaintheequipmentingoodworkingconditionandtoensuresafeoperation,itisnecessary
fortheusertofollowthesafetyinstructionsandwarningnoteswritteninthismanual.
• Pleasenotethatdamagescausedbyusermodicationstothisequipmentarenotsubjecttowarranty.
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-observance
of this manual or any unauthorised modication to the equipment.
OPERATING DETERMINATIONS
Ifthisequipmentisoperatedinanyotherway,thanthosedescribedinthismanual,theproductmaysufferdamageand
thewarrantybecomesvoid.Incorrectoperationmayleadtodangere.g:short-circuit,burnsandelectricshocksetc.
Donotendangeryourownsafetyandthesafetyofothers!
Incorrectinstallationorusecancauseseriousdamagetopeopleand/orproperty.
CAUTION!
KEEP THIS EQUIPMENT
AWAY FROM RAIN,
MOISTURE AND LIQUIDS
CAUTION!
TAKE CARE USING
THIS EQUIPMENT!
HIGH VOLTAGE-RISK
OF ELECTRIC SHOCK!!
• Neverletthepowercablecomeintocontactwithother
cables.Handlethepowercableandallmainsvoltage
connectionswithparticularcaution!
• Neverremovewarningorinformativelabelsfromtheunit.
• Donotopentheequipmentanddonotmodifytheunit.
• Donotconnectthisequipmenttoadimmerpack.
• Donotswitchtheequipmentonandoffinshortintervals,
asthiswillreducethesystem’slife.
• Onlyusetheequipmentindoors.
• Donotexposetoammablesources,liquidsorgases.
• Alwaysdisconnectthepowerfromthemainswhen
equipmentisnotinuseorbeforecleaning!Onlyhandle
thepower-cablebytheplug.Neverpullouttheplugby
pullingthepower-cable.
• Makesurethattheavailablemainssupplyvoltageis
between100~240VAC,50/60Hz.
• Makesurethatthepowercableisnevercrimpedor
damaged.Checktheequipmentandthepowercable
periodically.
• Iftheequipmentisdroppedordamaged,disconnectthe
mainspowersupplyimmediatelyandhaveaqualied
engineerinspecttheequipmentbeforeoperatingagain.
• Iftheequipmenthasbeenexposedtodrastic
temperatureuctuation(e.g.aftertransportation),
donotconnectpowerorswitchitonimmediately.
Thearisingcondensationmightdamagetheequipment.
Leavetheequipmentswitchedoffuntilithasreached
roomtemperature.
• Ifyourproductfailstofunctioncorrectly,stopuse
immediately.Packtheunitsecurely(preferablyinthe
originalpackingmaterial),andreturnittoyourProLight
dealerforservice.
• Onlyusefusesofsametypeandrating.
• Repairs,servicingandpowerconnectionmustonlybe
carriedoutbyaqualiedtechnician.THISUNITCONTAINS
NOUSERSERVICEABLEPARTS.
• Thislightingxtureisforprofessionaluseonly-itis
notdesignedfororsuitableforhouseholduse.The
productmustbeinstalledbyaqualiedtechnicianin
accordancewithlocalterritoryregulations.Thesafetyof
theinstallationistheresponsibilityoftheinstaller.The
xturepresentsrisksofsevereinjuryordeathduetore
hazards,electricshockandfalls.
• Warning!RiskGroup2LEDproductaccordingto
EN62471.Donotviewthelightoutputwithoptical
instrumentsoranydevicethatmayconcentratethebeam.
• WARRANTY:Oneyearfromdateofpurchase.
www.prolight.co.uk Quad Pix Batten User Manual
3
Product overview & technical specications
TheQuadPixBattenisaPixelcontrollableLEDbarwith12x4W4-in-1RGBWLEDs.Fullpixelcontrolisavailable
whenoperatedin48channelmodetocreatestunningcolourowsandchasesbutcanalsobecontrolledin
severalotherchannelmodes.
•12x4Wquad-colourLEDs(RGBW)
•Beamangle:30°
•536Lux@2m(fullon)
•2kHzrefreshrate
•Pixelmappingcapabilities
•DMXchannels:3/4/6or48selectable
•Staticcolour,auto,soundactiveand
master/slavemodesplusbuilt-inprograms
•0-100%dimmingandvariablestrobe
•Bracketallowsformultipleriggingoroor
standingapplications
•4pushbuttonmenuwithLEDdisplay
•IECpowerinput/output
•3-PinXLRinput/output
•Convectioncooled
Quad Pix Batten
Specications
Powerconsumption 48W
Powersupply 100~240V,50/60Hz
Fuse T1A250V
Dimensions 88x1070x65mm
Weight 2kg
Ordercode EQLED034
0m 1m 2m 3m 4m 5m
30° - Lux
FULL ON
R
G
B
W
2140
468
1130
192
1160
536
117
282
48
290
238
52
125
21
129
30°
134
29
70
12
72
86
18
45
7
46
1070mm 65mm
88mm
www.prolight.co.uk Quad Pix Batten User Manual
4
Technical specications
Inthebox:1 x xture,
2 x mounting
brackets/feet
1 x power cable
& 1 x user manual
POWER INPUT:
100-240V~50/60Hz
POWER OUTPUT
DMX INPUTMENU ENTER UP DOWN DMX OUTPUT
FUSE: T1A 250V
www.prolight.co.uk
QUAD PIX
BATTEN
POWER INPUT:
100-240V~50/60Hz
POWER OUTPUT
DMX INPUTMENU ENTER UP DOWN DMX OUTPUT
FUSE: T1A 250V
www.prolight.co.uk
QUAD PIX
BATTEN
POWER INPUT:
100-240V~50/60Hz
POWER OUTPUT
DMX INPUTMENU ENTER UP DOWN DMX OUTPUT
FUSE: T1A 250V
www.prolight.co.uk
QUAD PIX
BATTEN
POWER INPUT:
100-240V~50/60Hz
POWER OUTPUT
DMX INPUTMENU ENTER UP DOWN DMX OUTPUT
FUSE: T1A 250V
www.prolight.co.uk
QUAD PIX
BATTEN
01 02
0308 10 05 06 0704 09
01-Brackettighteningknobs
02-Bracket
03-Earthpoint
04-LEDdisplay
05-Functionbuttons
06-3-PinXLRinput
07-3-PinXLRoutput
08-IECpowerinput
09-IECpoweroutput
10-FuseT1A250V
www.prolight.co.uk Quad Pix Batten User Manual
5
Operating instructions
S L a v
Slave mode
C O L r
Static colour mode
r 0 0 0
g 0 0 0
r 2 5 5
g 2 5 5
b 0 0 0
u 0 0 0
b 2 5 5
u 2 5 5
S o u d
Sound modes
S
_
. 0 0
S -. 0 0
S
_
. 3 1
S -. 3 1
S _. 0 0
{ - - -
S _. 3 1
- - - }
Auto mode
A u t 0
n 0 0 1
s P 0 0
n 1 0 0
S P F L
F 5 0 0 F 5 9 9
MENU
d. 0 0 1
DMX address setting
& channel mode
d. 0 0 1
d. 5 1 2
3 - c h
4 - c h
6 - c h
4 8 c h
P r - -
P r 0 2 P r 1 6
S P F L
F 5 9 9
S P 0 1
F 5 0 0
Built-in
programs
1 - g b
2 - r b
3 - r y
4 - r g
5 - c u
6 - r u
9 - y g
1 0 u u
1 3 - b
1 4 - A
7 - g u
8 - b u
1 1 - r
1 2 - g
1 5 O N
- O F F
F 5 0 0
F 5 1 2
P
r
0 1
www.prolight.co.uk Quad Pix Batten User Manual
6
Operating instructions
DMX mode:
OperatinginaDMXcontrolmodeenvironmentgivestheuserthegreatestexibilitywhenitcomes
tocustomisingorcreatingashow.Inthismodeyouwillbeabletocontroleachindividualtraitofthe
xtureandeachxtureindependently.
ToaccesstheDMXaddressmode,pressthe“MENU”buttononthefrontoftheunittoshowd.001
ontheLEDdisplay.Nowusethe“UP”and“DOWN”buttonstosettherequiredDMXaddress.
Pressthe“ENTER”buttontoconrmthesetting.Thedisplaywillnowshow--chontheLEDdisplay.
Nowusethe“UP”and“DOWN”buttonstochooseoneofthe3/4/6or48DMXchannelmodes.Press
the“ENTER”buttontoconrmthesetting.
Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.
Value CH1 CH2 CH3
000 Nofuntion Nofuntion Nofuntion
001-014 Program2
Speed
(0-255)
Flash
(0-255)
015-029 Program3
030-044 Program4
045-059 Program5
060-074 Program6
075-089 Program7
090-104 Program8
105-119 Program9
120-134 Program10
135-149 Program11
150-164 Program12
165-179 Program13
180-194 Program14
195-209 Program15
210-224 Program16
225-255 Soundactive
Sensitivity
(0-255)
Nofunction
3 channel mode:
Channel Value Function
1 000-255 Red(0-100%)
2 000-255 Green(0-100%)
3 000-255 Blue(0-100%)
4 000-255 White(0-100%)
4 channel mode:
Channel Value Function
1 000-255 Masterdimmer(0-100%)
2 000-255 Red(0-100%)
3 000-255 Green(0-100%)
4 000-255 Blue(0-100%)
5 000-255 White(0-100%)
6 000-255 Strobe(slow-fast)
6 channel mode:
www.prolight.co.uk Quad Pix Batten User Manual
7
Operating instructions
Static colour mode:
Toaccessthestaticcolourmodepress“MENU”untilCoLrshowsontheLEDdisplay.
Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstoselectthebrightness
betweenr.000~r.255.Pressthe“ENTER” buttonandrepeatforgreen(G),blue(b)andwhite(u).
Value: 000 - 255 (000 = low brightness, 255 = high brightness)
Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.
Built-in programs:
Toaccessthebuilt-inprograms,pressthe“MENU”buttononthefrontoftheunittoshowPr--
ontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochoosethe
requiredprogramPr01~Pr16.Pressthe“ENTER”buttontoconrmthesetting.
Pr01-Nowusethe“UP”and“DOWN”buttonstoselecttherequiredcolour.Pressthe“ENTER”
buttontoconrmthesettingandusethe“UP”and“DOWN”buttonstochoosetheashspeed
F500~F599.Pressthe“ENTER”buttontoconrmthesetting.
Pr02~Pr16-Nowusethe“UP”and“DOWN”buttonstoselecttherunningspeed
SP01~SPFL.Pressthe“ENTER”buttontoconrmthesetting.Nowusethe“UP”and“DOWN”
buttonstoselecttheashspeedF500~F599.Pressthe“ENTER”buttontoconrmthesetting.
Finallyusethe“UP”and“DOWN”buttonstoselectthefadingtimeFd00~Fd99.
Pressthe“ENTER”buttontoconrmthesetting.
Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.
48 channel mode:
CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 CH9 CH10 CH11 CH12
R1
(0-100%)
G1
(0-100%)
B1
(0-100%)
W1
(0-100%)
R2
(0-100%)
G2
(0-100%)
B2
(0-100%)
W2
(0-100%)
R3
(0-100%)
G3
(0-100%)
B3
(0-100%)
W3
(0-100%)
CH13 CH14 CH15 CH16 CH17 CH18 CH19 CH20 CH21 CH22 CH23 CH24
R4
(0-100%)
G4
(0-100%)
B4
(0-100%)
W4
(0-100%)
R5
(0-100%)
G5
(0-100%)
B5
(0-100%)
W5
(0-100%)
R6
(0-100%)
G6
(0-100%)
B6
(0-100%)
W6
(0-100%)
CH25 CH26 CH27 CH28 CH29 CH30 CH31 CH32 CH33 CH34 CH35 CH36
R7
(0-100%)
G7
(0-100%)
B7
(0-100%)
W7
(0-100%)
R8
(0-100%)
G8
(0-100%)
B8
(0-100%)
W8
(0-100%)
R9
(0-100%)
G9
(0-100%)
B9
(0-100%)
W9
(0-100%)
CH37 CH38 CH39 CH40 CH41 CH42 CH43 CH44 CH45 CH46 CH47 CH48
R10
(0-100%)
G10
(0-100%)
B10
(0-100%)
W10
(0-100%)
R11
(0-100%)
G11
(0-100%)
B11
(0-100%)
W11
(0-100%)
R12
(0-100%)
G12
(0-100%)
B12
(0-100%)
W12
(0-100%)
www.prolight.co.uk Quad Pix Batten User Manual
8
Auto mode:
Toaccessautomode,pressthe“MENU”buttononthefrontoftheunittoshowAutoontheLED
display.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochoosetherequired
programn001~n100.Pressthe“ENTER”buttonthenusethe“UP”and“DOWN”buttonstoselect
therunningspeedSP01~SPFL.Finallypressthe“ENTER”buttonandusethe“UP”and“DOWN”
buttonstoselecttheashspeedF500~F599.
Pressthe“ENTER”buttontoconrmthesetting.
Master/slave mode:
ThedefaultsettingforthisxtureisMaster.
Tosettheslaveunit,pressthe“MENU”buttononthefrontofthemasterunittoshowSLav
ontheLEDdisplay.TheunitisnowinSlavemode.
Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.
PleaseensurethatallslaveunitsaresettothesameDMXchannelmodeasthemasterunit.
Sound active mode:
Toaccessthesoundactivemode,pressthe“MENU”buttononthefrontoftheunittoshowSoud
ontheLEDdisplay.Nowpressthe“ENTER”buttontochooseSoundmode1andusethe“UP”and
“DOWN”buttonstochoosetherequiredsoundsensitivityS
-
.00~S
-
.31.Pressthe“ENTER”button
againtochooseSoundmode2andusethe“UP”and“DOWN”buttonstochoosetherequiredsound
sensitivityS-.00~S-.31.Pressthe“ENTER”buttonagaintochooseSoundmode3andusethe“UP”
and“DOWN”buttonstochoosetherequiredsoundsensitivityS_.00~S_.31.Finallypress
the“ENTER”buttonandusethe“UP”and“DOWN”buttonstoselectthedirection{---or---}.
Pressthe“ENTER”buttontoconrmthesetting.
Value: 01 - 31 (01 = low sensitivity, 31 = high sensitivity)
Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.
Operating instructions
www.prolight.co.uk Quad Pix Batten User Manual
9
DMX setup
FurtherDMXcablescanbe
purchasedfromallgoodsound
andlightingsuppliersor
ProLightConceptsdealers.
Pleasequote:
CABL10 – 2m
CABL11 – 5m
CABL12 – 10m
Setting the DMX address:
TheDMXmodeenablestheuseofauniversalDMXcontroller.Eachxturerequiresa“startaddress”
from1-512.Axturerequiringoneormorechannelsforcontrolbeginstoreadthedataonthechannel
indicatedbythestartaddress.Forexample,axturethatoccupiesoruses7channelsofDMXandwas
addressedtostartonDMXchannel100,wouldreaddatafromchannels:100,101,102,103,104,105
and106.Chooseastartaddresssothatthechannelsuseddonotoverlap.E.g.thenextunitinthe
chainstartsat107.
DMX 512:
DMX(DigitalMultiplex)isauniversalprotocolusedasaformofcommunicationbetweenintelligent
xturesandcontrollers.ADMXcontrollersendsDMXdatainstructionsformthecontrollertothexture.
DMXdataissentasserialdatathattravelsfromxturetoxtureviatheDATA“IN”andDATA“OUT”
XLRterminalslocatedonallDMXxtures(mostcontrollersonlyhaveadata“out”terminal).
DMX linking:
DMXisalanguageallowingallmakesandmodelsofdifferentmanufacturestobelinkedtogether
andoperatefromasinglecontroller,aslongasallxturesandthecontrollerareDMXcompliant.
ToensureproperDMXdatatransmission,whenusingseveralDMXxturestrytousetheshortest
cablepathpossible.TheorderinwhichxturesareconnectedinaDMXlinedoesnotinuencethe
DMXaddressing.Forexample;axtureassignedtoaDMXaddressof1maybeplacedanywherein
aDMXline,atthebeginning,attheend,oranywhereinthemiddle.Whenaxtureisassigneda
DMXaddressof1,theDMXcontrollerknowstosendDATAassignedtoaddress1tothatunit,
nomatterwhereitislocatedintheDMXchain.
DATA cable (DMX cable) requirements (for DMX operation):
ThisxturecanbecontrolledviaDMX-512protocol.TheDMXaddressissetonthebackoftheunit.
YourunitandyourDMXcontrollerrequireastandard3-pinXLRconnectorfordatainput/output,
seeimagebelow.
Also remember that DMX cable must be daisy chained and cannot be split.
www.prolight.co.uk Quad Pix Batten User Manual
10
Notice:
Besuretofollowthediagramsbelowwhenmakingyourowncables.Donotconnectthecables
shieldconductortothegroundlugorallowtheshieldconductortocomeincontactwiththeXLRs
outercasing.Groundingtheshieldcouldcauseashortcircuitanderraticbehaviour.
Special note:
Line termination:
Whenlongerrunsofcableareused,
youmayneedtouseaterminatoron
thelastunittoavoiderraticbehaviour.
Using a cable terminator will decrease
the possibilities of erratic behaviour.
(3-pin - Order ref: CABL9O, 5-pin - Order ref: CABL89)
5-pin XLR DMX connectors:
Somemanufacturesuse5-pinXLRconnectorsfordatatransmissioninplaceof3-pin.5-pinXLRxtures
maybeimplementedina3-pinXLRDMXline.Wheninsertingstandard5-pinXLRconnectorsintoa
3-pinlineacableadaptormustbeused.Thediagrambelowdetailsthecorrectcableconversion.
Terminationreducessignaltransmission
problemsandinterference.itisalways
advisabletoconnectaDMXterminal,
(resistance120Ohm1/4W)betweenpin2
(DMX-)andpin3(DMX+)ofthelastxture.
5-pin XLR (socket)
Pin 1: GND (screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
Pin 4: N/C
Pin 5: N/C
3-pin XLR (socket)
Pin 1: GND (screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
3-pin XLR (socket)
Pin 1: GND (screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
5-pin XLR (socket)
Pin 1: GND (screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
Pin 4: N/C
Pin 5: N/C
DMX setup
www.prolight.co.uk Quad Pix Batten User Manual
11
WEEE notice & Optional accessories
Correct Disposal of this Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries
with separate collection systems)
Thismarkingshownontheproductoritsliterature,indicatesthatitshouldnotbedisposedof
withotherhouseholdwastesattheendofitsworkinglife.Topreventpossibleharmtothe
environmentorhumanhealthfromuncontrolledwastedisposal,pleaseseparatethisfromother
typesofwastesandrecycleitresponsiblytopromotethesustainablereuseofmaterialresources.
Householdusersshouldcontacteithertheretailerwheretheypurchasedthisproduct,ortheir
localgovernmentofce,fordetailsofwhereandhowtheycantakethisitemforenvironmentally
saferecycling.
Businessusersshouldcontacttheirsupplierandcheckthetermsandconditionsofthe
purchasecontract.Thisproductshouldnotbemixedwithothercommercialwastesfordisposal.
www.prolight.co.uk Quad Pix Batten User Manual
12
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Equinox Systems EQLED034 User manual

Equinox Systems
Brand
Equinox Systems
Model
EQLED034
Category
Stroboscopes & disco lights
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents