2. Entertainment & hobby
  3. Musical instruments
  4. Fog Machine
  5. Equinox Systems
  6. Verti Jet

Equinox Systems Verti Jet, EQLED356 User manual

  • Hello! I am an AI chatbot trained to assist you with the Equinox Systems Verti Jet User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Order code: EQLED356
Verti Jet
User Manual
www.prolight.co.uk Verti Jet User Manual
2
Safety advice
WARNING - FOR YOUR OWN SAFETY, PLEASE READ THIS USER
MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP!
• Beforeyourinitialstart-up,pleasemakesurethatthereisnodamagecausedduringtransportation.
• Shouldtherebeanydamage,consultyourdealeranddonotusetheequipment.
• Tomaintaintheequipmentingoodworkingconditionandtoensuresafeoperation,itisnecessary
fortheusertofollowthesafetyinstructionsandwarningnoteswritteninthismanual.
• Pleasenotethatdamagescausedbyusermodicationstothisequipmentarenotsubjecttowarranty.
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-observance
of this manual or any unauthorised modication to the equipment.
OPERATING DETERMINATIONS
Ifthisequipmentisoperatedinanyotherway,thanthosedescribedinthismanual,theproductmaysufferdamageand
thewarrantybecomesvoid.Incorrectoperationmayleadtodangere.g:short-circuit,burnsandelectricshocksetc.
Donotendangeryourownsafetyandthesafetyofothers!
Incorrectinstallationorusecancauseseriousdamagetopeopleand/orproperty.
Beforellingtheunitdisconnectthemains.Neverllwithhotliquids.
Onlyusehighquality,waterbasedsmokeuidrecommendedbythemanufacturer.
Othersmokeuidsmaycausecloggingandvoidtheguarantee.
Alwaysmakesurethereissufcientsmokeuidinthetank.Operatingthissmokemachine
withoutsmokeuidwillcausedamagetothepumpaswellasoverheatingoftheheater.
Operatetheunitonlyafteryouhavefamiliarisedyourselfwithitsfunctions.Donotpermitoperation
bypersonsnotqualiedforoperatingtheunitandalwaysdrainthetankandusetheoriginalpackaging
iftheunitistobetransported.
CAUTION!
TAKE CARE USING
THIS EQUIPMENT!
HIGH VOLTAGE-RISK
OF ELECTRIC SHOCK!!
• Neverletthepowercablecomeintocontactwithothercables.
Handlethepowercableandallmainsvoltage
connectionswithparticularcaution!
• Neverremovewarningorinformativelabelsfromtheunit.
• Donotopentheequipmentanddonotmodifytheunit.
• Donotswitchtheequipmentonandoffinshortintervals,asthis
willreducethesystem’slife.
• Onlyusetheequipmentindoors.
• Donotexposetoammablesources,liquidsorgases.
• Alwaysdisconnectthepowerfromthemainswhen
equipmentisnotinuseorbeforecleaning!Onlyhandlethe
power-cablebytheplug.Neverpullouttheplugbypullingthe
power-cable.
• Makesurethattheavailablemainssupplyvoltage
is240VAC,50Hz.
• Makesurethatthepowercableisnevercrimpedor
damaged.Checktheequipmentandthepowercable
periodically.
• Iftheequipmentisdroppedordamaged,disconnectthemains
powersupplyimmediatelyandhaveaqualiedengineerinspect
theequipmentbeforeoperatingagain.
• Iftheequipmenthasbeenexposedtodrastic
temperatureuctuation(e.g.aftertransportation),
donotconnectpowerorswitchitonimmediately.
Thearisingcondensationmightdamagetheequipment.
Leavetheequipmentswitchedoffuntilithasreachedroom
temperature.
• Ifyourproductfailstofunctioncorrectly,stopuseimmediately.
Packtheunitsecurely(preferablyinthe
originalpackingmaterial),andreturnittoyourProLightdealer
forservice.
• Onlyusefusesofsametypeandrating.
• Repairs,servicingandpowerconnectionmustonlybe
carriedoutbyaqualiedtechnician.THISUNITCONTAINSNO
USERSERVICEABLEPARTS.
• Thisxtureisforprofessionaluseonly-itisnotdesignedforor
suitableforhouseholduse.Theproductmustbeinstalledbya
qualiedtechnicianinaccordancewithlocalterritoryregulations.
Thesafetyoftheinstallationistheresponsibilityoftheinstaller.
Thexturepresentsrisksofsevereinjuryordeathduetore
hazards,electricshockandfalls.
• Warning!RiskGroup2LEDproductaccordingtoEN62471.Do
notviewthelightoutputwithopticalinstrumentsoranydevice
thatmayconcentratethebeam.
• WARRANTY:Oneyearfromdateofpurchase.
www.prolight.co.uk Verti Jet User Manual
3
Product overview & technical specications
TheVertiJetcombinesahighoutputLEDwashwithahigh
outputfogger.Red,greenandbluecolourmixingalongwitha
copiousfogoutputaddsanextradimensionofeffectsatshows
andevents.Thismachineproducesa12,000cubicfeetper
minuteoutputwitha1500Wheateranda2.5litreuidtank.
•21x3Wtri-colourLEDs(RGB)
•Smokeoutput:approx.
12,000cu.ftperminute
•Projectiondistance:6-8m
•Warm-uptime:approx.4-5mins
•Tankcapacity:2.5litres
•DMXchannels:7
•Staticcolour,colourchange
andautomodes
Verti Jet
205mm
360mm
430mm
05 06
11
07
101213
08
09
0403
01-Smokeaperture
02-LEDoutput
03-3-PinXLRinput/output
04-5-PinXLRinput/output
05-Fluidtank
06-LEDdisplay
07-Menubuttons
08-Poweron/offswitch
09-IECpowerinput
10-FuseF8A250V
11-Manualswitch
12-Remotecontrolsensor
13-Carryhandle
Inthebox:1 x xture,
1 x wireless remote control,
1 x power cable
& 1 x user manual
Specications
Powerconsumption 1600W
Powersupply 220~240V,50/60Hz
Fuse F8A250V
Dimensions 205x430x360mm
Weight 8.4kg
Ordercode EQLED356
Wireless
RemoteControl
included
01
02
www.prolight.co.uk Verti Jet User Manual
4
Operation:
Placetheunitonalevelsurfacewiththeoutputnozzleorientatedforvertical(upwards)orhorizontal
output.DONOTinstallinavertical(downwards)positionoraboveanypersons.
Alwaysdisconnectitfromthemainssupplybeforellingasuidcouldbespilled.
Fluid replenishment:
Alwaysllthetankawayfromtheunittopreventuidgettinginsidethemainhousing.
Ifuidshouldgetinsidethemainhousing,disconnecttheunitfromthemainsimmediately
andconsultatechnician.
Removethepipefromthetankbyunscrewingthecapfully.Thenunscrewthe2spring-loadedhand
screwsfromthebracketsecuringtankandremovetank.Onceoutandawayfromunit,standthetank
upright,thenlltankwithuid.Slidebottlebackintotheunitandreplacethepipebyscrewingthecap
backontightly.Securethetankbyreplacingthebracketandsecuringwiththe2spring-loadedhand
screws,makingsuretheyarermlyinposition.
Installation:
Installtheunitinawell-ventilatedarea.Useinaninsufcientlyventilatedroomcanleadtothe
condensationofthesmokeuid.Theresultingslipperysurfacecancauseaccidents.Keepaminimum
distanceof1maroundtheunit.
Furthermoredonotorientatetheoutputaperturedirectlyinthedirectionoftheaudience’seyes.
Inordertocreatethebesteffect,thereshouldbeadistancebetweentheunitandtheaudience
ofatleast3m.
Onlyinstallthesmokemachineonreresistant,scratchresistantandwaterresistantsurfaces.
Operating instructionsOperating instructions
DANGER OF FIRE!
When installing the unit, make sure there is no highly ammable
material (decoration articles etc) within a minimum distance of 1m
DANGER TO LIFE!
Disconnect from the mains before starting maintenance
Only use quality smoke uids recommended by your dealer. You must
not use substances which are classied as ‘DANGEROUS WORKING
MATERIALS’ or ‘FLAMMABLE FLUIDS’.
www.prolight.co.uk Verti Jet User Manual
5
OnstartuptheLEDdisplayillshowUpwhilsttheunititheatingup.
AftertheunithasheateduptheLEDdisplaywillshowread theunitisreadytofog.
Manual control mode:
Manualcontrolcanbefacilitatedviathewirelessremoteorthe“MANUAL”buttonlocatedunderthe
LEDdisplay.
ThedesiredcolourofLEDscanbesetformanualmodebyfollowingtheinstructionsbelow.
Pressthe“MENU”buttonontheunittoshowCoLo ontheLEDdisplay.Pressthe“ENTER”button
thenusethe“UP”and“DOWN” buttonstochoosethedesiredcolour,thenpressthe“ENTER”buttonto
conrm.
Pressandholdthe“MANUAL”buttononorpressthelockbuttonontheremoteforoperation.
Pleasenote:Oncethelockbuttonontheremotehasbeenpressed,thefoggerwillrunfor5secondsin
thecolourset,followedbya30secondintervalcontinuously.
Note:Thecolourwillshowinthesmokeoutputonceset.
Operating instructionsOperating instructions
Press‘MENU’key
SetLEDwork
program
‘ENTER’
conrm
‘ENTER’
conrm
‘ENTER’
conrm
‘ENTER’
conrm
‘ENTER’
conrm
‘ENTER’
conrm
‘ENTER’
conrm
‘ENTER’
conrm
‘ENTER’
conrm
‘ENTER’
conrm
Autocolourchange
Blackout
Red
Green
Blue
Redandgreen
Redandblue
Greenandblue
Red,greenandblue
C o L o
C o 2
C o 3
C o 4
C o 5
C o 6
C o 7
o f f
C o 1
a u t o
www.prolight.co.uk Verti Jet User Manual
6
Remote:
Pressthe“MENU”buttonontheunittoshowreNo
ontheLEDdisplay.Nowpressthe“ENTER”buttonand
usethe“UP”and“DOWN”buttonstoselectonoroff.
Pressthe“ENTER”buttontoconrmthesetting.
DMX mode:
OperatinginaDMXcontrolmodeenvironmentgivestheuserthegreatestexibilitywhenitcomes
tocustomisingorcreatingashow.Inthismodeyouwillbeabletocontroleachindividualtraitof
thextureandeachxtureindependently.
ToaccesstheDMXaddressmode,pressthe“MENU”buttonontheunittoshowAddronthe
LEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstosettherequired
DMXaddress.Pressthe“ENTER”buttontoconrmthesetting.
Note:ThisunitisdesignedsotheDMXcontroltakespriority.WhenaDMXcontrollerisconnectedthe
screenwilldisplaythecurrentaddresscodeandwirelessremotecontrolfunctionandthemanual
buttonfunctionwillbothbedisabled.
Operating instructionsOperating instructions
Output
smoke
No
smoke
Press‘MENU’key
SetDMXAddress
‘ENTER’
conrm
‘ENTER’
conrm
‘ENTER’
DMXaddress
A d d r
0 0 1
5 0 6
Channel Value Function
CH1
000-009 Smokeoff
010-255 Smokeoutput(fullon)
CH2 000-255 Masterdimmer(0-100%)
CH3
000-020 Nofunction
021-127 Staticcolour
128-255 Auto(slowtofast)
CH4
000-009 Strobeoff
010-255 Strobe(slowtofast)
CH5 000-255 Reddimmer(0-100%)
CH6 000-255 Greendimmer(0-100%)
CH7 000-255 Bluedimmer(0-100%)
www.prolight.co.uk Verti Jet User Manual
7
Operating instructions
Troubleshooting:
Whenthedisplayshowsaashing-- thismeansthemachinehasrunoutofuidandhasstopped
workingtoprotectthepump.Whenthishappenspleasedothefollowing:
Powerofftheunitanddisconnectfrommainspowersupply.
Relltheuidtank.
Reconnectthemainspowersupplyandpowerontheunit
Theunitcannowbeoperatedagainafterithasnishedheatingupagain,thescreenshouldnot
show-- anymore.
Ifthe-- continuestoash,pleasecontactyourdealer.
Inordertokeeptheunitworkingefcientlymakesuretheuidlevelistoppedupanddoesn’trunout.
www.prolight.co.uk Verti Jet User Manual
8
Operating instructions
Cleaning and maintenance:
Werecommendafrequentcleaningoftheunit.Pleaseuseasoftlint-freeandmoistenedcloth.
Neverusealcoholorsolvents!Cleantheoutputnozzlefrequentlyfromsmokeuidresidues.Theuids
werecommendarenon-hazardoustotheenvironmentandcanbedisposedofviathesewagesystem.
Therearenoserviceablepartsinsidethisunitexceptforthefuse.
Maintenanceandserviceoperationsareonlytobecarriedoutbyauthoriseddealers.
Replacing the fuse:
Onlyreplacethefusewithafuseofsametypeandrating.
Beforereplacingthefuse,disconnectfromthemains,seethefollowingforprocedure:
Step 1: Open the fuse holder on the rear panel with a suitable screwdriver.
Step 2: Remove the old fuse from the fuse holder.
Step 3: Install the new fuse in the fuse holder.
(Replacementfusesshouldbeofthesamevalueasoriginallysupplied)
Step 4: Replace the fuse holder in the housing.
Shouldyouneedanyspareparts,onlyusegenuineparts.
Ifdefective,pleasedisposeoftheunusableunitinaccordancewiththecurrentlegalregulations.
Shouldyouhaveanyfurtherquestions,pleasecontactyourdealer.
www.prolight.co.uk Verti Jet User Manual
9
Setting the DMX address:
TheDMXmodeenablestheuseofauniversalDMXcontroller.Eachxturerequiresa“startaddress”
from1-511.Axturerequiringoneormorechannelsforcontrolbeginstoreadthedataonthechannel
indicatedbythestartaddress.Forexample,axturethatoccupiesoruses7channelsofDMXandwas
addressedtostartonDMXchannel100,wouldreaddatafromchannels:100,101,102,103,104,105
and106.Chooseastartaddresssothatthechannelsuseddonotoverlap.E.g.thenextunitinthe
chainstartsat107.
DMX 512:
DMX(DigitalMultiplex)isauniversalprotocolusedasaformofcommunicationbetweenintelligent
xturesandcontrollers.ADMXcontrollersendsDMXdatainstructionsformthecontrollertothexture.
DMXdataissentasserialdatathattravelsfromxturetoxtureviatheDATA“IN”andDATA“OUT”
XLRterminalslocatedonallDMXxtures(mostcontrollersonlyhaveadata“out”terminal).
DMX linking:
DMXisalanguageallowingallmakesandmodelsofdifferentmanufacturestobelinkedtogether
andoperatefromasinglecontroller,aslongasallxturesandthecontrollerareDMXcompliant.
ToensureproperDMXdatatransmission,whenusingseveralDMXxturestrytousetheshortest
cablepathpossible.TheorderinwhichxturesareconnectedinaDMXlinedoesnotinuencethe
DMXaddressing.Forexample;axtureassignedtoaDMXaddressof1maybeplacedanywherein
aDMXline,atthebeginning,attheend,oranywhereinthemiddle.Whenaxtureisassigneda
DMXaddressof1,theDMXcontrollerknowstosendDATAassignedtoaddress1tothatunit,
nomatterwhereitislocatedintheDMXchain.
DATA cable (DMX cable) requirements (for DMX operation):
ThisxturecanbecontrolledviaDMX-512protocol.TheDMXaddressissetonthebackoftheunit.
YourunitandyourDMXcontrollerrequireastandard3-pinXLRconnectorfordatainput/output,
seeimagebelow.
Note: DMX cable must be daisy chained and cannot be split.
DMX setup
FurtherDMXcablescanbe
purchasedfromallgoodsound
andlightingsuppliersor
ProLightConceptsdealers.
Pleasequote:
CABL10 – 2m
CABL11 – 5m
CABL12 – 10m
www.prolight.co.uk Verti Jet User Manual
10
Notice:
Besuretofollowthediagramsbelowwhenmakingyourowncables.Donotconnectthecables
shieldconductortothegroundlugorallowtheshieldconductortocomeincontactwiththeXLRs
outercasing.Groundingtheshieldcouldcauseashortcircuitanderraticbehaviour.
Special note:
Line termination:
Whenlongerrunsofcableareused,
youmayneedtouseaterminatoron
thelastunittoavoiderraticbehaviour.
Using a cable terminator will decrease
the possibilities of erratic behaviour.
(3-pin - Order ref: CABL90, 5-pin - Order ref: CABL89)
5-pin XLR DMX connectors:
Somemanufacturesuse5-pinXLRconnectorsfordatatransmissioninplaceof3-pin.5-pinXLRxtures
maybeimplementedina3-pinXLRDMXline.Wheninsertingstandard5-pinXLRconnectorsintoa
3-pinlineacableadaptormustbeused.Thediagrambelowdetailsthecorrectcableconversion.
Terminationreducessignaltransmission
problemsandinterference.Itisalways
advisabletoconnectaDMXterminal,
(resistance120Ohm1/4W)betweenpin2
(DMX-)andpin3(DMX+)ofthelastxture.
5-pin XLR (female)
Pin 1: GND (screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
Pin 4: N/C
Pin 5: N/C
3-pin XLR (female)
Pin 1: GND (screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
3-pin XLR (male)
Pin 1: GND (screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
5-pin XLR (male)
Pin 1: GND (screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
Pin 4: N/C
Pin 5: N/C
DMX setup
www.prolight.co.uk Verti Jet User Manual
11
WEEE notice
Correct Disposal of this Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries
with separate collection systems)
Thismarkingshownontheproductoritsliterature,indicatesthatitshouldnotbedisposedof
withotherhouseholdwastesattheendofitsworkinglife.Topreventpossibleharmtothe
environmentorhumanhealthfromuncontrolledwastedisposal,pleaseseparatethisfromother
typesofwastesandrecycleitresponsiblytopromotethesustainablereuseofmaterialresources.
Householdusersshouldcontacteithertheretailerwheretheypurchasedthisproduct,ortheir
localgovernmentofce,fordetailsofwhereandhowtheycantakethisitemforenvironmentally
saferecycling.
Businessusersshouldcontacttheirsupplierandcheckthetermsandconditionsofthe
purchasecontract.Thisproductshouldnotbemixedwithothercommercialwastesfordisposal.
www.prolight.co.uk Verti Jet User Manual
12
/