2. Home
  3. Lighting
  4. Stroboscopes & disco lights
  5. EQUINOX
  6. EQLED034

EQUINOX EQLED034, Quad Pix Batten User manual

  • Hello! I am an AI chatbot trained to assist you with the EQUINOX EQLED034 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Order code: EQLED034
Quad Pix Batten
User Manual
www.prolight.co.uk Quad Pix Batten User Manual
2
Safety advice
WARNING
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CARE-
FULLY BEFORE YOUR INITIAL START-UP!
• Beforeyourinitialstart-up,pleasemakesurethatthereisnodamagecausedduringtransportation.
• Shouldtherebeanydamage,consultyourdealeranddonotusetheequipment.
• Tomaintaintheequipmentingoodworkingconditionandtoensuresafeoperation,itisnecessary
fortheusertofollowthesafetyinstructionsandwarningnoteswritteninthismanual.
• Pleasenotethatdamagescausedbyusermodicationstothisequipmentarenotsubjecttowarranty.
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-observance
of this manual or any unauthorised modication to the equipment.
OPERATING DETERMINATIONS
Ifthisequipmentisoperatedinanyotherway,thanthosedescribedinthismanual,theproductmaysufferdamageand
thewarrantybecomesvoid.Incorrectoperationmayleadtodangere.g:short-circuit,burnsandelectricshocksetc.
Donotendangeryourownsafetyandthesafetyofothers!
Incorrectinstallationorusecancauseseriousdamagetopeopleand/orproperty.
CAUTION!
KEEP THIS EQUIPMENT
AWAY FROM RAIN,
MOISTURE AND LIQUIDS
CAUTION!
TAKE CARE USING
THIS EQUIPMENT!
HIGH VOLTAGE-RISK
OF ELECTRIC SHOCK!!
• Neverletthepowercablecomeintocontactwithother
cables.Handlethepowercableandallmainsvoltage
connectionswithparticularcaution!
• Neverremovewarningorinformativelabelsfromtheunit.
• Donotopentheequipmentanddonotmodifytheunit.
• Donotconnectthisequipmenttoadimmerpack.
• Donotswitchtheequipmentonandoffinshortintervals,
asthiswillreducethesystem’slife.
• Onlyusetheequipmentindoors.
• Donotexposetoammablesources,liquidsorgases.
• Alwaysdisconnectthepowerfromthemainswhen
equipmentisnotinuseorbeforecleaning!Onlyhandle
thepower-cablebytheplug.Neverpullouttheplugby
pullingthepower-cable.
• Makesurethattheavailablemainssupplyvoltageis
between100~240VAC,50/60Hz.
• Makesurethatthepowercableisnevercrimpedor
damaged.Checktheequipmentandthepowercable
periodically.
• Iftheequipmentisdroppedordamaged,disconnectthe
mainspowersupplyimmediatelyandhaveaqualied
engineerinspecttheequipmentbeforeoperatingagain.
• Iftheequipmenthasbeenexposedtodrastic
temperatureuctuation(e.g.aftertransportation),
donotconnectpowerorswitchitonimmediately.
Thearisingcondensationmightdamagetheequipment.
Leavetheequipmentswitchedoffuntilithasreached
roomtemperature.
• Ifyourproductfailstofunctioncorrectly,stopuse
immediately.Packtheunitsecurely(preferablyinthe
originalpackingmaterial),andreturnittoyourProLight
dealerforservice.
• Onlyusefusesofsametypeandrating.
• Repairs,servicingandpowerconnectionmustonlybe
carriedoutbyaqualiedtechnician.THISUNITCONTAINS
NOUSERSERVICEABLEPARTS.
• Thislightingxtureisforprofessionaluseonly-itis
notdesignedfororsuitableforhouseholduse.The
productmustbeinstalledbyaqualiedtechnicianin
accordancewithlocalterritoryregulations.Thesafetyof
theinstallationistheresponsibilityoftheinstaller.The
xturepresentsrisksofsevereinjuryordeathduetore
hazards,electricshockandfalls.
• Warning!RiskGroup2LEDproductaccordingto
EN62471.Donotviewthelightoutputwithoptical
instrumentsoranydevicethatmayconcentratethebeam.
• WARRANTY:Oneyearfromdateofpurchase.
www.prolight.co.uk Quad Pix Batten User Manual
3
Product overview & technical specications
TheQuadPixBattenisaPixelcontrollableLEDbarwith12x4W4-in-1RGBWLEDs.Fullpixelcontrolisavailable
whenoperatedin48channelmodetocreatestunningcolourowsandchasesbutcanalsobecontrolledin
severalotherchannelmodes.
•12x4Wquad-colourLEDs(RGBW)
•Beamangle:30°
•536Lux@2m(fullon)
•2kHzrefreshrate
•Pixelmappingcapabilities
•DMXchannels:3/4/6or48selectable
•Staticcolour,auto,soundactiveand
master/slavemodesplusbuilt-inprograms
•0-100%dimmingandvariablestrobe
•Bracketallowsformultipleriggingoroor
standingapplications
•4pushbuttonmenuwithLEDdisplay
•IECpowerinput/output
•3-PinXLRinput/output
•Convectioncooled
Quad Pix Batten
Specications
Powerconsumption 48W
Powersupply 100~240V,50/60Hz
Fuse T1A250V
Dimensions 88x1070x65mm
Weight 2kg
Ordercode EQLED034
0m 1m 2m 3m 4m 5m
30° - Lux
FULL ON
R
G
B
W
2140
468
1130
192
1160
536
117
282
48
290
238
52
125
21
129
30°
134
29
70
12
72
86
18
45
7
46
1070mm 65mm
88mm
www.prolight.co.uk Quad Pix Batten User Manual
4
Technical specications
Inthebox:1 x xture,
2 x mounting
brackets/feet
1 x power cable
& 1 x user manual
POWER INPUT:
100-240V~50/60Hz
POWER OUTPUT
DMX INPUTMENU ENTER UP DOWN DMX OUTPUT
FUSE: T1A 250V
www.prolight.co.uk
QUAD PIX
BATTEN
POWER INPUT:
100-240V~50/60Hz
POWER OUTPUT
DMX INPUTMENU ENTER UP DOWN DMX OUTPUT
FUSE: T1A 250V
www.prolight.co.uk
QUAD PIX
BATTEN
POWER INPUT:
100-240V~50/60Hz
POWER OUTPUT
DMX INPUTMENU ENTER UP DOWN DMX OUTPUT
FUSE: T1A 250V
www.prolight.co.uk
QUAD PIX
BATTEN
POWER INPUT:
100-240V~50/60Hz
POWER OUTPUT
DMX INPUTMENU ENTER UP DOWN DMX OUTPUT
FUSE: T1A 250V
www.prolight.co.uk
QUAD PIX
BATTEN
01 02
0308 10 05 06 0704 09
01-Brackettighteningknobs
02-Bracket
03-Earthpoint
04-LEDdisplay
05-Functionbuttons
06-3-PinXLRinput
07-3-PinXLRoutput
08-IECpowerinput
09-IECpoweroutput
10-FuseT1A250V
www.prolight.co.uk Quad Pix Batten User Manual
5
Operating instructions
S L a v
Slave mode
C O L r
Static colour mode
r 0 0 0
g 0 0 0
r 2 5 5
g 2 5 5
b 0 0 0
u 0 0 0
b 2 5 5
u 2 5 5
S o u d
Sound modes
S
_
. 0 0
S -. 0 0
S
_
. 3 1
S -. 3 1
S _. 0 0
{ - - -
S _. 3 1
- - - }
Auto mode
A u t 0
n 0 0 1
s P 0 0
n 1 0 0
S P F L
F 5 0 0 F 5 9 9
MENU
d. 0 0 1
DMX address setting
& channel mode
d. 0 0 1
d. 5 1 2
3 - c h
4 - c h
6 - c h
4 8 c h
P r - -
P r 0 2 P r 1 6
S P F L
F 5 9 9
S P 0 1
F 5 0 0
Built-in
programs
1 - g b
2 - r b
3 - r y
4 - r g
5 - c u
6 - r u
9 - y g
1 0 u u
1 3 - b
1 4 - A
7 - g u
8 - b u
1 1 - r
1 2 - g
1 5 O N
- O F F
F 5 0 0
F 5 1 2
P
r
0 1
www.prolight.co.uk Quad Pix Batten User Manual
6
Operating instructions
DMX mode:
OperatinginaDMXcontrolmodeenvironmentgivestheuserthegreatestexibilitywhenitcomes
tocustomisingorcreatingashow.Inthismodeyouwillbeabletocontroleachindividualtraitofthe
xtureandeachxtureindependently.
ToaccesstheDMXaddressmode,pressthe“MENU”buttononthefrontoftheunittoshowd.001
ontheLEDdisplay.Nowusethe“UP”and“DOWN”buttonstosettherequiredDMXaddress.
Pressthe“ENTER”buttontoconrmthesetting.Thedisplaywillnowshow--chontheLEDdisplay.
Nowusethe“UP”and“DOWN”buttonstochooseoneofthe3/4/6or48DMXchannelmodes.Press
the“ENTER”buttontoconrmthesetting.
Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.
Value CH1 CH2 CH3
000 Nofuntion Nofuntion Nofuntion
001-014 Program2
Speed
(0-255)
Flash
(0-255)
015-029 Program3
030-044 Program4
045-059 Program5
060-074 Program6
075-089 Program7
090-104 Program8
105-119 Program9
120-134 Program10
135-149 Program11
150-164 Program12
165-179 Program13
180-194 Program14
195-209 Program15
210-224 Program16
225-255 Soundactive
Sensitivity
(0-255)
Nofunction
3 channel mode:
Channel Value Function
1 000-255 Red(0-100%)
2 000-255 Green(0-100%)
3 000-255 Blue(0-100%)
4 000-255 White(0-100%)
4 channel mode:
Channel Value Function
1 000-255 Masterdimmer(0-100%)
2 000-255 Red(0-100%)
3 000-255 Green(0-100%)
4 000-255 Blue(0-100%)
5 000-255 White(0-100%)
6 000-255 Strobe(slow-fast)
6 channel mode:
www.prolight.co.uk Quad Pix Batten User Manual
7
Operating instructions
Static colour mode:
Toaccessthestaticcolourmodepress“MENU”untilCoLrshowsontheLEDdisplay.
Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstoselectthebrightness
betweenr.000~r.255.Pressthe“ENTER” buttonandrepeatforgreen(G),blue(b)andwhite(u).
Value: 000 - 255 (000 = low brightness, 255 = high brightness)
Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.
Built-in programs:
Toaccessthebuilt-inprograms,pressthe“MENU”buttononthefrontoftheunittoshowPr--
ontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochoosethe
requiredprogramPr01~Pr16.Pressthe“ENTER”buttontoconrmthesetting.
Pr01-Nowusethe“UP”and“DOWN”buttonstoselecttherequiredcolour.Pressthe“ENTER”
buttontoconrmthesettingandusethe“UP”and“DOWN”buttonstochoosetheashspeed
F500~F599.Pressthe“ENTER”buttontoconrmthesetting.
Pr02~Pr16-Nowusethe“UP”and“DOWN”buttonstoselecttherunningspeed
SP01~SPFL.Pressthe“ENTER”buttontoconrmthesetting.Nowusethe“UP”and“DOWN”
buttonstoselecttheashspeedF500~F599.Pressthe“ENTER”buttontoconrmthesetting.
Finallyusethe“UP”and“DOWN”buttonstoselectthefadingtimeFd00~Fd99.
Pressthe“ENTER”buttontoconrmthesetting.
Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.
48 channel mode:
CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 CH9 CH10 CH11 CH12
R1
(0-100%)
G1
(0-100%)
B1
(0-100%)
W1
(0-100%)
R2
(0-100%)
G2
(0-100%)
B2
(0-100%)
W2
(0-100%)
R3
(0-100%)
G3
(0-100%)
B3
(0-100%)
W3
(0-100%)
CH13 CH14 CH15 CH16 CH17 CH18 CH19 CH20 CH21 CH22 CH23 CH24
R4
(0-100%)
G4
(0-100%)
B4
(0-100%)
W4
(0-100%)
R5
(0-100%)
G5
(0-100%)
B5
(0-100%)
W5
(0-100%)
R6
(0-100%)
G6
(0-100%)
B6
(0-100%)
W6
(0-100%)
CH25 CH26 CH27 CH28 CH29 CH30 CH31 CH32 CH33 CH34 CH35 CH36
R7
(0-100%)
G7
(0-100%)
B7
(0-100%)
W7
(0-100%)
R8
(0-100%)
G8
(0-100%)
B8
(0-100%)
W8
(0-100%)
R9
(0-100%)
G9
(0-100%)
B9
(0-100%)
W9
(0-100%)
CH37 CH38 CH39 CH40 CH41 CH42 CH43 CH44 CH45 CH46 CH47 CH48
R10
(0-100%)
G10
(0-100%)
B10
(0-100%)
W10
(0-100%)
R11
(0-100%)
G11
(0-100%)
B11
(0-100%)
W11
(0-100%)
R12
(0-100%)
G12
(0-100%)
B12
(0-100%)
W12
(0-100%)
www.prolight.co.uk Quad Pix Batten User Manual
8
Auto mode:
Toaccessautomode,pressthe“MENU”buttononthefrontoftheunittoshowAutoontheLED
display.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochoosetherequired
programn001~n100.Pressthe“ENTER”buttonthenusethe“UP”and“DOWN”buttonstoselect
therunningspeedSP01~SPFL.Finallypressthe“ENTER”buttonandusethe“UP”and“DOWN”
buttonstoselecttheashspeedF500~F599.
Pressthe“ENTER”buttontoconrmthesetting.
Master/slave mode:
ThedefaultsettingforthisxtureisMaster.
Tosettheslaveunit,pressthe“MENU”buttononthefrontofthemasterunittoshowSLav
ontheLEDdisplay.TheunitisnowinSlavemode.
Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.
PleaseensurethatallslaveunitsaresettothesameDMXchannelmodeasthemasterunit.
Sound active mode:
Toaccessthesoundactivemode,pressthe“MENU”buttononthefrontoftheunittoshowSoud
ontheLEDdisplay.Nowpressthe“ENTER”buttontochooseSoundmode1andusethe“UP”and
“DOWN”buttonstochoosetherequiredsoundsensitivityS
-
.00~S
-
.31.Pressthe“ENTER”button
againtochooseSoundmode2andusethe“UP”and“DOWN”buttonstochoosetherequiredsound
sensitivityS-.00~S-.31.Pressthe“ENTER”buttonagaintochooseSoundmode3andusethe“UP”
and“DOWN”buttonstochoosetherequiredsoundsensitivityS_.00~S_.31.Finallypress
the“ENTER”buttonandusethe“UP”and“DOWN”buttonstoselectthedirection{---or---}.
Pressthe“ENTER”buttontoconrmthesetting.
Value: 01 - 31 (01 = low sensitivity, 31 = high sensitivity)
Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.
Operating instructions
www.prolight.co.uk Quad Pix Batten User Manual
9
DMX setup
FurtherDMXcablescanbe
purchasedfromallgoodsound
andlightingsuppliersor
ProLightConceptsdealers.
Pleasequote:
CABL10 – 2m
CABL11 – 5m
CABL12 – 10m
Setting the DMX address:
TheDMXmodeenablestheuseofauniversalDMXcontroller.Eachxturerequiresa“startaddress”
from1-512.Axturerequiringoneormorechannelsforcontrolbeginstoreadthedataonthechannel
indicatedbythestartaddress.Forexample,axturethatoccupiesoruses7channelsofDMXandwas
addressedtostartonDMXchannel100,wouldreaddatafromchannels:100,101,102,103,104,105
and106.Chooseastartaddresssothatthechannelsuseddonotoverlap.E.g.thenextunitinthe
chainstartsat107.
DMX 512:
DMX(DigitalMultiplex)isauniversalprotocolusedasaformofcommunicationbetweenintelligent
xturesandcontrollers.ADMXcontrollersendsDMXdatainstructionsformthecontrollertothexture.
DMXdataissentasserialdatathattravelsfromxturetoxtureviatheDATA“IN”andDATA“OUT”
XLRterminalslocatedonallDMXxtures(mostcontrollersonlyhaveadata“out”terminal).
DMX linking:
DMXisalanguageallowingallmakesandmodelsofdifferentmanufacturestobelinkedtogether
andoperatefromasinglecontroller,aslongasallxturesandthecontrollerareDMXcompliant.
ToensureproperDMXdatatransmission,whenusingseveralDMXxturestrytousetheshortest
cablepathpossible.TheorderinwhichxturesareconnectedinaDMXlinedoesnotinuencethe
DMXaddressing.Forexample;axtureassignedtoaDMXaddressof1maybeplacedanywherein
aDMXline,atthebeginning,attheend,oranywhereinthemiddle.Whenaxtureisassigneda
DMXaddressof1,theDMXcontrollerknowstosendDATAassignedtoaddress1tothatunit,
nomatterwhereitislocatedintheDMXchain.
DATA cable (DMX cable) requirements (for DMX operation):
ThisxturecanbecontrolledviaDMX-512protocol.TheDMXaddressissetonthebackoftheunit.
YourunitandyourDMXcontrollerrequireastandard3-pinXLRconnectorfordatainput/output,
seeimagebelow.
Also remember that DMX cable must be daisy chained and cannot be split.
www.prolight.co.uk Quad Pix Batten User Manual
10
Notice:
Besuretofollowthediagramsbelowwhenmakingyourowncables.Donotconnectthecables
shieldconductortothegroundlugorallowtheshieldconductortocomeincontactwiththeXLRs
outercasing.Groundingtheshieldcouldcauseashortcircuitanderraticbehaviour.
Special note:
Line termination:
Whenlongerrunsofcableareused,
youmayneedtouseaterminatoron
thelastunittoavoiderraticbehaviour.
Using a cable terminator will decrease
the possibilities of erratic behaviour.
(3-pin - Order ref: CABL9O, 5-pin - Order ref: CABL89)
5-pin XLR DMX connectors:
Somemanufacturesuse5-pinXLRconnectorsfordatatransmissioninplaceof3-pin.5-pinXLRxtures
maybeimplementedina3-pinXLRDMXline.Wheninsertingstandard5-pinXLRconnectorsintoa
3-pinlineacableadaptormustbeused.Thediagrambelowdetailsthecorrectcableconversion.
Terminationreducessignaltransmission
problemsandinterference.itisalways
advisabletoconnectaDMXterminal,
(resistance120Ohm1/4W)betweenpin2
(DMX-)andpin3(DMX+)ofthelastxture.
5-pin XLR (socket)
Pin 1: GND (screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
Pin 4: N/C
Pin 5: N/C
3-pin XLR (socket)
Pin 1: GND (screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
3-pin XLR (socket)
Pin 1: GND (screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
5-pin XLR (socket)
Pin 1: GND (screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
Pin 4: N/C
Pin 5: N/C
DMX setup
www.prolight.co.uk Quad Pix Batten User Manual
11
WEEE notice & Optional accessories
Correct Disposal of this Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries
with separate collection systems)
Thismarkingshownontheproductoritsliterature,indicatesthatitshouldnotbedisposedof
withotherhouseholdwastesattheendofitsworkinglife.Topreventpossibleharmtothe
environmentorhumanhealthfromuncontrolledwastedisposal,pleaseseparatethisfromother
typesofwastesandrecycleitresponsiblytopromotethesustainablereuseofmaterialresources.
Householdusersshouldcontacteithertheretailerwheretheypurchasedthisproduct,ortheir
localgovernmentofce,fordetailsofwhereandhowtheycantakethisitemforenvironmentally
saferecycling.
Businessusersshouldcontacttheirsupplierandcheckthetermsandconditionsofthe
purchasecontract.Thisproductshouldnotbemixedwithothercommercialwastesfordisposal.
www.prolight.co.uk Quad Pix Batten User Manual
12
/