Philips DC1010/79 Quick start guide

Type
Quick start guide

This manual is also suitable for

What’s in the Box?
You should find these items upon opening the box.
1
Quick Start Guide
2
User Manual
Quick Start Guide
User Manual
Quick Start Guide
DC1010
AC power cord
3 X iPod dock doors
Line-in Cable
DC1010_12_QSG_Eng 2008.5.9, 9:05 PM1
Tip
– See the User Manual for how to
connect other equipment to this
system.
– Use the supplied AC power
cable only! Using any other power
connection device may damage
your main set!
1
Connect the AC power cable of the system.
Before plugging your player in the dock, select a suitable dock door.
3 iPod dock doors are included. Each door has indication to match
different iPod types.
Push the dock to eject it.
Align the slots of the dock and latches of the dock door, then
slide in the door.
Align the connectors of on the dock and iPod, and then push
the iPod gently to install your iPod to the dock connector.
Hold the iPod carefully and pull it out slowly.
Turn the wheel of the dock support to adjust the height to
different iPod types.
3
2
4
5
7
1
3
4
7
6
To take out the iPod, push the dock to eject it.
2
Push
Push the dock door to close it.
8
DC1010_12_QSG_Eng 2008.5.9, 9:05 PM2
  • Page 1 1
  • Page 2 2

Philips DC1010/79 Quick start guide

Type
Quick start guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI