Acer D4K1717 User manual

Acer Projector

P8800/F680/PF-4K50/PV870/HF-760/

D4K1717

User's Guide

English

2

Changes may be made periodically to the information in this publication without obligation

to notify any person of such revisions or changes. Such changes will be incorporated in new

editions of this manual or supplementary documents and publications. This company makes

no representations or warranties, either expressed or implied, with respect to the contents

hereof and specifically disclaims the implied warranties of merchantability or fitness for a

particular purpose.

Record the model number, serial number, purchase date and place of purchase information in

the space provided below. The serial number and model number are recorded on the label

affixed to your projector. All correspondence concerning your unit should include the serial

number, model number and purchase information.

No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in

any form or by any means, electronically, mechanically, by photocopy, recording or otherwise,

without the prior written permission of Acer Incorporated.

Model number: _________________________________

Serial number: __________________________________

Date of purchase: _______________________________

Place of purchase: ______________________________

Acer Projector User's Guide

Original Issue: 06/2017

Acer and the Acer logo are registered trademarks of Acer Incorporated. Other companies' product

names or trademarks are used herein for identification purposes only and belong to their respective

companies.

"HDMI™, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered

trademarks of HDMI Licensing LLC."

English

3

iii

Information for your safety and

comfort

Read these instructions carefully. Keep this document for future reference.

Follow all warnings and instructions marked on the product.

Turning the product off before cleaning

Unplug this product from the wall outlet before cleaning. Do not use liquid

cleaners or aerosol cleaners. Use a damp cloth for cleaning.

Caution for plug as disconnecting device

Observe the following guidelines when connecting and disconnecting power to

the external power supply unit:

•

Install the power supply unit before connecting the power cord to the AC

power outlet.

•

Unplug the power cord before removing the power supply unit from the

projector.

•

If the system has multiple sources of power, disconnect power from the

system by unplugging all power cords from the power supplies.

Caution for Accessibility

Be sure that the power outlet you plug the power cord into is easily accessible

and located as close to the equipment operator as possible. When you need to

disconnect power to the equipment, be sure to unplug the power cord from the

electrical outlet.

Warnings!

• Do not use this product near water.

•

Do not place this product on an unstable cart, stand or table. If the product

falls, it could be seriously damaged.

•

Slots and openings are provided for ventilation to ensure reliable

operation of the product and to protect it from overheating. These

openings must not be blocked or covered. The openings should never be

blocked by placing the product on a bed, sofa, rug or other similar surface.

•

This product should never be placed near or over a radiator or heat

register, or in a built-in installation unless proper ventilation is provided.

•

Never push objects of any kind into this product through cabinet slots as

they may touch dangerous voltage points or short-out parts that could

result in a fire or electric shock. Never spill liquid of any kind onto or into

the product.

•

To avoid damage of internal components and to prevent battery leakage,

do not place the product on a vibrating surface.

English

4

iv

• Never use it under sporting, exercising, or any vibrating environment

which will probably cause unexpected short current or damage rotor

devices, lamp.

Using electrical power

• This product should be operated from the type of power indicated on the

marking label. If you are not sure of the type of power available, consult

your dealer or local power company.

•

Do not allow anything to rest on the power cord. Do not locate this

product where people will walk on the cord.

•

If an extension cord is used with this product, make sure that the total

ampere rating of the equipment plugged into the extension cord does not

exceed the extension cord ampere rating. Also, make sure that the total

rating of all products plugged into the wall outlet does not exceed the fuse

rating.

•

Do not overload a power outlet, strip or receptacle by plugging in too

many devices. The overall system load must not exceed 80% of the branch

circuit rating. If power strips are used, the load should not exceed 80% of

the power strip's input rating.

•

This product's AC adapter is equipped with a three-wire grounded plug.

The plug only fits in a grounded power outlet. Make sure the power outlet

is properly grounded before inserting the AC adapter plug. Do not insert

the plug into a non-grounded power outlet. Contact your electrician for

details.

Warning! The grounding pin is a safety feature. Using a power outlet that is

n

ot properly grounded may result in electric shock and/or injury.

Note: The grounding pin also provides good protection from unexpected

n

oise produced by other nearby electrical devices that may interfere with

t

he performance of this product.

• Use the product only with the supplied power supply cord set. If you need

to replace the power cord set, make sure that the new power cord meets

the following requirements: detachable type, UL listed/CSA certified, VDE

approved or its equivalent, 4.5 meters (15 feet) maximum length.

English

5

v

Product servicing

Do not attempt to service this product yourself, as opening or removing covers

may expose you to dangerous voltage points or other risks. Refer all servicing to

qualified service personnel.

Unplug this product from the wall outlet and refer servicing to qualified service

personnel when:

•

the power cord or plug is damaged, cut or frayed

•

liquid was spilled into the product

•

the product was exposed to rain or water

•

the product has been dropped or the case has been damaged

•

the product exhibits a distinct change in performance, indicating a need

for service

•

the product does not operate normally after following the operating

instructions

Note: Adjust only those controls that are covered by the operating

i

nstructions, since improper adjustment of other controls may result in

d

amage and will often require extensive work by a qualified technician to

r

estore the product to normal condition.

Warning! For safety reasons, do not use non-compliant parts when adding

o

r changing components. Consult your reseller for purchase options.

Your device and its enhancements may contain small parts. Keep them out of

the reach of small children.

Additional safety information

• Do not look into the projector's lens when the lamp is on. The bright may

hurt your eyes.

•

Turn on the projector first and then signal sources

•

Do not place the product in following environments:

• Space that is poorly ventilated or confined. At least 50cm clearance from walls

and free flow of air around the projector is necessary.

• Locations where temperatures may become excessively high, such as inside of a

car with all windows rolled up.

• Locations where excessive humidity, dust, or cigarette smoke may contaminate

optical components, shortening the life span and darkening the image.

• Locations near fire alarms.

• Locations with an ambient temperature above 40 ºC/104 ºF.

• Locations where the altitudes are higher than 10000 feet.

• Unplug immediately if there is something wrong with your projector. Do

not operate if smoke, strange noise or odor comes out of your projector. It

might cause fire or electric shock. In this case, unplug immediately and

English

6

vi

contact your dealer.

•

Do not keep using this product to break or drop it. In this case contact your

dealer for inspection.

•

Do not face the projector lens to the sun. It can lead to fire.

•

When switching the projector off, suggest to ensure the projector

completes its cooling cycle before disconnecting power.

•

Do not frequently turn off the main power abruptly or unplug the

projector during operation. The best way is to wait for the fan to turn off

before turning main power off.

•

Do not touch air outlet grille and bottom plate which becomes hot.

•

Do not look into the air outlet grille when projector is operating. It may

hurt your eyes.

•

Always open the lens shutter or remove the lens cap when the projector is

on.

•

Do not block the projector lens with any object when the projector is

under operation as this could cause the object to become heated and

deformed or even cause a fire.

•

The lamp becomes extremely hot during operation. Allow the projector to

cool for approximately 45 minutes prior to removing the lamp assembly for

replacement.

•

Do not operate lamps beyond the rated lamp life. It could cause it to break

on rare occasions.

•

Never replace the lamp assembly or any electronic components unless the

projector is unplugged.

•

The product will detect the life of the lamp itself. Please be sure to change

the lamp when is showing warning message.

•

When changing the lamp, please allow unit to cool down, and follow all

changing instructions.

•

Reset the "Lamp Reset" function from the Onscreen display "Setup lamp

settings menu " menu after replacing the lamp module.

•

Do not attempt to disassemble this projector. There are dangerous high

voltages inside which may hurt you. The only user serviceable part is the

lamp which has its own removable cover. Refer servicing only to suitable

qualified professional service personnel.

•

Do not stand the projector on end vertically. It may cause the projector to

fall over, causing injury or damage.

•

This product is capable of displaying inverted images for ceiling mount

installation. Only use acer ceiling mount kit for mounting the projector

and ensure it is securely installed.

English

7

vii

Caution for Listening

To protect your hearing, follow these instructions.

•

Increase the volume gradually until you can hear clearly and comfortably.

• Do not increase the volume level after your ears have adjusted.

• Do not listen to music at high volumes for extended periods.

• Do not increase the volume to block out noisy surroundings.

• Decrease the volume if you can't hear people speaking near you.

Disposal instructions

Do not throw this electronic device into the trash when discarding. To minimize

pollution and ensure utmost protection of the global environment, please

recycle. For more information on the Waste from Electrical and Electronics

Equipment (WEEE) regulations, visit

h

ttp://www.acer-group.com/public/Sustainability/sustainability01.htm

Mercury advisory

For projectors or electronic products containing an LCD/CRT monitor or display:

Lamp(s) inside this product contain mercury and must be recycled or disposed of

according to local, state or federal laws. For more information, contact the

Electronic Industries Alliance at www.eiae.org. For lamp-specific disposal

information, check w

ww.lamprecycle.org

Do not stare into the beam, RG2

"As with any bright source, do not stare into the direct beam, RG2 IEC 62471-

5:2015"

“Lamp(s) contain Mercury,

Dispose Properly.”

RG2

English

8

viii

First things first

Usage Notes

Do:

• Turn off the product before cleaning.

• Use a soft cloth moistened with mild detergent to clean the display

housing.

• Disconnect the power plug from AC outlet if the product is not being used

for a long period of time.

Don't:

• Block the slots and openings on the unit provided for ventilation.

• Use abrasive cleaners, waxes or solvents to clean the unit.

• Use under the following conditions:

• In extremely hot, cold or humid environments.

• In areas susceptible to excessive dust and dirt.

• Near any appliance that generates a strong magnetic field.

• Place In direct sunlight.

Precautions

Follow all warnings, precautions and maintenance as recommended in this

user's guide to maximize the life of your unit.

Warning:

• Do not look into the projector's lens when the lamp is on. The bright light may hurt

your eyes.

• To reduce the risk of fire or electric shock, do not expose this product to rain or

moisture.

• Please do not open or disassemble the product as this may cause electric shock.

• When changing the lamp, please allow unit to cool down, and follow all changing

instructions.

• This product will detect the life of the lamp itself. Please be sure to change the lamp

when it shows warning messages.

• Reset the "Lamp Reset" function from the Onscreen display "Setup lamp settings

menu

" menu after replacing the lamp module.

• When switching the projector off, please ensure the projector completes its cooling

cycle before disconnecting power.

• Turn on the projector first and then the signal sources.

• Do not use lens cap when projector is in operation.

• When the lamp reaches the end of its life, it will burn out and may make a loud

popping sound. If this happens, the projector will not turn back on until the lamp

module has been replaced. To replace the lamp, follow the procedures listed under

"Replacing the Lamp".

English

9

TABLE OF CONTENTS

INFORMATION FOR YOUR SAFETY AND COMFIRT ................... 3

FIRST THINGS FIRST ....................................................................... 8

Usage Notes .............................................................................................................................. 8

Precautions................................................................................................................................ 8

INTRODUCTION ............................................................................... 11

Package overview .................................................................................................................... 11

Standard accessories ............................................................................................................... 11

Optional accessories ................................................................................................................ 11

Product overview ...................................................................................................................... 12

Connections.............................................................................................................................. 13

Keypad ..................................................................................................................................... 14

LED status indicators................................................................................................................ 14

Remote control ......................................................................................................................... 15

SETUP AND INSTALLATION ........................................................... 17

Installing the projector .............................................................................................................. 17

Connecting sources to the projector ......................................................................................... 18

Adjusting the projector image ................................................................................................... 19

Remote setup ........................................................................................................................... 20

USING THE PROJECTOR ............................................................... 22

Powering on / o the projector .................................................................................................. 22

Selecting an input source ......................................................................................................... 23

Menu navigation and features .................................................................................................. 24

OSD Menu tree......................................................................................................................... 25

Display image settings menu.................................................................................................... 33

Display aspect ratio menu ........................................................................................................ 35

Display edge mask menu ......................................................................................................... 36

Display digital zoom menu........................................................................................................ 36

Display image shift menu ......................................................................................................... 36

Setup projection menu.............................................................................................................. 37

Setup lamp settings menu ........................................................................................................ 37

Setup lter settings menu ......................................................................................................... 37

Setup lens settings menu ......................................................................................................... 37

Setup power settings menu ...................................................................................................... 37

Setup security menu ................................................................................................................. 38

Setup test pattern menu ........................................................................................................... 38

Setup remote settings menu..................................................................................................... 38

Setup projector ID menu........................................................................................................... 39

Setup 12V trigger menu............................................................................................................ 39

English

10

Setup options menu.................................................................................................................. 39

Setup reset menu ..................................................................................................................... 40

Network LAN menu .................................................................................................................. 40

Network control menu............................................................................................................... 41

Setup network control settings menu ....................................................................................... 42

Info menu.................................................................................................................................. 47

MAINTENANCE ................................................................................. 48

Replacing the lamp ................................................................................................................... 48

ADDITIONAL INFORMATION .......................................................... 50

Compatible resolutions ............................................................................................................. 50

Image size and projection distance .......................................................................................... 52

Projector dimensions and ceiling mount installation ................................................................. 53

IR remote control codes ........................................................................................................... 54

Troubleshooting ........................................................................................................................ 56

Warning indicators .................................................................................................................... 57

Specications ........................................................................................................................... 60

REGULATIONS AND SAFETY NOTICES ...................................... 61

English

11

INTRODUCTION

Package overview

Carefully unpack and verify that you have the items listed below under standard accessories. Some of the items

under optional accessories may not be available depending on the model, specication and your region of

purchase. Please check with your place of purchase. Some accessories may vary from region to region.

The warranty card is only supplied in some specic regions. Please consult your dealer for detailed information.

Standard accessories

Optional accessories

Note: Optional accessories vary depending on model, specication and region.

Projector Power lead *(1)

Documentation



CD User Manual



Warranty Card*



Basic User Manual

VGA cable HDMI cable

Note:

 The remote control is shipped with the battery.

 *(1) Power lead is depending on the region.

Remote control

On

Geometric

Mode

Correction PIP/PBP

Off

F1 F2

AV Mute

ENTER

Source

Volume D Zoom

Info.

F3

VGA

1

S-Video

2

HDMI1

3

HDMI2

HDMI3

Format Freeze Remote

ID All

HDBaseT

4

Video

5

DVI

6

BNC

7

YPbPr

8

DisplayPort

9

3D

0

Re-Sync

Menu

English

12

INTRODUCTION

Product overview

12

2

6

8910 7

3

11

4

1

5

Note: Keep a minimum distance of 20 cm between the "inlet" and "outlet" labels.

No Item No Item

1. Lens 7. Keypad

2.

IR Receiver

8.

Kensington

TM

Lock Port

3. Lamp Cover 9. Security Bar

4. Tilt-Adjustment Feet 10. Power Socket

5. LED Status Indicators 11. Ventilation (outlet)

6. Ventilation (inlet) 12. Input / Output

English

13

INTRODUCTION

Connections

USB Power

Out(5V-1.5A)

Service

RS-232

12V Out

A

12V Out

B

HDMI 1 HDMI 2

(HDCP2.2)

HDMI 3 HDMI Out

DisplayPort

VGA/YPbPr

RJ-45

Wired Remote

101 2 3 4 5 6 7 8 9

111213

No Item No Item

1. USB Power Out (5V 1.5A)/Service

Connector

8. VGA/YPbPr Connector

2. RS-232 Connector 9. RJ-45 Connector

3. 12V Out A Connector 10. Wired Remote Connector

4. 12V Out B Connector 11. Power Socket

5. HDMI 1 Connector 12. HDMI Out Connector

6. HDMI 2 (HDCP2.2) Connector(*) 13. HDMI 3 Connector

7. DisplayPort

Note:

 Remote mouse requires special remote control.

 This model supports mouse / service capability.

 (*)Only HDMI 2 (HDCP2.2) connector supports 4K (Ultra HD) at 60Hz refresh rate.

English

14

INTRODUCTION

Keypad

1 2

6

5

3 4

8

9

7

LED status indicators

101112

No Item No Item

1. Power 7. Information

2.

Re-Sync

8.

Four Directional Select Keys

3. Enter 9. Menu

4. Source 10. On/Standby LED

5. Zoom 11. Temp LED

6. Focus 12. Lamp LED

English

15

INTRODUCTION

Remote control

On

Geometric

Mode

Correction PIP/PBP

Off

F1 F2

AV Mute

ENTER

Source

Volume D Zoom

Info.

F3

VGA

1

S-Video

2

HDMI1

3

HDMI2

HDMI3

Format Freeze Remote

ID All

HDBaseT

4

Video

5

DVI

6

BNC

7

YPbPr

8

DisplayPort

9

3D

0

Re-Sync

Menu

3

1

2

7

4

5

6

9

11

8

10

12

13

14

15

16

17

18

19

20

21

31

32

3334

22

23

25

26

27

28

30

24

29

English

16

INTRODUCTION

No Item No Item

1. Power on 18. PIP/PBP

2.

Geometric Correction 19. Function button (F2) (Assignable)

3. Function button (F1) (Assignable) 20. AV mute

4. Mode 21. Enter

5. Four directional select keys 22. Laser

6. Information 23. Function button (F3) (Assignable)

7. Source 24. Re-sync

8. Menu 25. D (Digital) Zoom

9. Volume - / + 26. Remote ID / Remote all

10. Freeze 27. HDMI2

11. Format (Aspect Ratio) 28. HDMI1

12. VGA 29. HDMI3

13. S-Video 30. DVI

14. HDBaseT 31. 3D

15. BNC 32. DisplayPort

16. YPbPr 33. Numeric keypad (0-9)

17. Power o 34. Video

Note:

 Some keys may have no function for models that do not support these features.

English

17

SETUP AND INSTALLATION

Installing the projector

Your projector is designed to be installed in one of four possible positions.

Your room layout or personal preference will dictate which installation location you select. Take into consideration

the size and position of your screen, the location of a suitable power outlet, as well as the location and distance

between the projector and the rest of your equipment.

Table mount front Ceiling mount front

Table mount rear Ceiling mount rear

Projector should be placed at on a surface and 90 degrees / perpendicular to the screen.

 How to determine projector location for a given screen size, please refer to distance table on page

52.

 How to determine screen size for a given distance, please refer to distance table on pages 52.

Note: The further away the projector is placed from the screen the projected image size increases and vertical

oset also increases proportionally.

IMPORTANT!

Do not operate the projector in any orientation other that table top or ceiling mount. The projector should

be horizontal and not tilted either forwards/backwards or left/right. Any other orientation will invalidate the

warranty and may shorten the lifetime of the projector lamp or the projector itself.

English

18

SETUP AND INSTALLATION

Connecting sources to the projector

USB Power

Out(5V-1.5A)

Service

RS-232

12V Out

A

12V Out

B

HDMI 1 HDMI 2

(HDCP2.2)

HDMI 3 HDMI Out

DisplayPort

VGA/YPbPr

RJ-45

Wired Remote

MOLEX

1

3

10

5

11

4

12

7

6

2

89

13

No Item No Item

1. USB Power Cable 8. Power Cord

2.

HDMI Stick 9. HDMI Cable

3. DisplayPort Cable 10. HDMI Cable(*)

4. VGA In Cable 11. 12V DC Jack

5. RCA Component Cable 12. RS232 Cable

6. RJ-45 Cable 13. USB Cable

7. Wired Remote Control Cable

Note: (*)The HDMI 2 (HDCP2.2) connector supports 4K (Ultra HD) at 60Hz refresh rate.

English

19

SETUP AND INSTALLATION

Adjusting the projector image

Image height

The projector is equipped with elevator feet for adjusting the image height.

1. Locate the adjustable foot you wish to adjust on the underside of the projector.

2. Rotate the adjustable foot clockwise or counterclockwise to raise or lower the projector.

Tilt-Adjustment Feet

Tilt-Adjustment Ring

Zoom and focus

 Use the Zoom button to resize the projected image and screen size.

1

 Use the Focus button to sharpen the projected image.

2

1

English

20

SETUP AND INSTALLATION

Remote setup

Installing / replacing the batteries

Two AAA size batteries are supplied for the remote control.

1. Remove the battery cover on the back of the remote control.

2. Insert AAA batteries in the battery compartment as illustrated.

3. Replace back cover on remote control.

Note: Replace only with the same or equivalent type batteries.

CAUTION

Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.

 Do not mix batteries of di erent types. Di erent types of batteries have di erent characteristics.

 Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or

cause chemical leakage in old batteries.

 Remove batteries as soon as they are depleted. Chemicals that leak from batteries that come in

contact with skin can cause a rash. If you  nd any chemical leakage, wipe thoroughly with a cloth.

 The batteries supplied with this product may have a shorter life expectancy due to storage conditions.

 If you will not be using the remote control for an extended period of time, remove the batteries.

 When you dispose of the batteries, you must obey the law in the relative area or country.

E ective range

Infra-Red (IR) remote control sensor is located on the top side and on the front side of the projector. Ensure to hold

the remote control at an angle within 30 degrees perpendicular to the projector's front IR remote control sensor

and 20 degrees perpendicular to the projector's top IR remote control sensor to function correctly. The distance

between the remote control and the sensor should not be longer than 7 meters (~ 23 feet).

 Make sure that there are no obstacles between the remote control and the IR sensor on the projector

that might obstruct the infra-red beam.

 Make sure the IR transmitter of the remote control is not being shined by sunlight or  uorescent lamps

directly.

 Please keep the remote controller away from  uorescent lamps for over 2 meters or the remote

controller might become malfunction.

 If the remote control is closed to Inverter-Type  uorescent lamps, it might become ine ective from time

to time.

 If the remote control and the projector are within a very short distance, the remote control might

become ine ective.

 When you aim at the screen, the e ective distance is less than 10 m from the remote control to the

screen and re ecting the IR beams back to the projector. However, the e ective range might change

according to screens.

Page is loading ...

Acer D4K1717 User manual

This manual is also suitable for

Acer D4K1717 User manual

Related papers

Other documents