Acer U5330W User manual

Acer Projector User's Guide

Original Issue: 06/2018

Acer Projector

U5530/U5330W/U5230/R350/R320/R310/

PU-F20/PU-W20/PU-X20/SP150/SP130/

SP110/FU-420/FU-320/FU-120/D1P1801/

DWX1802/DNX1803

User's Guide

Changes may be made periodically to the information in this publication without obligation

to notify any person of such revisions or changes. Such changes will be incorporated in new

editions of this manual or supplementary documents and publications. This company makes

no representations or warranties, either expressed or implied, with respect to the contents

hereof and specifically disclaims the implied warranties of merchantability or fitness for a

particular purpose.

Record the model number, serial number, purchase date and place of purchase information in

the space provided below. The serial number and model number are recorded on the label

affixed to your projector. All correspondence concerning your unit should include the serial

number, model number and purchase information.

No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in

any form or by any means, electronically, mechanically, by photocopy, recording or otherwise,

without the prior written permission of Acer Incorporated.

Model number: _________________________________

Serial number: __________________________________

Date of purchase: _______________________________

Place of purchase: ______________________________

Acer and the Acer logo are registered trademarks of Acer Incorporated. Other companies' product

names or trademarks are used herein for identification purposes only and belong to their respective

companies.

"HDMI™, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered

trademarks of HDMI Licensing LLC."

iii

Information for your safety and

comfort

Read these instructions carefully. Keep this document for future reference.

Follow all warnings and instructions marked on the product.

Turning the product off before cleaning

Unplug this product from the wall outlet before cleaning. Do not use liquid

cleaners or aerosol cleaners. Use a damp cloth for cleaning.

Caution for plug as disconnecting device

Observe the following guidelines when connecting and disconnecting power to

the external power supply unit:

• Install the power supply unit before connecting the power cord to the AC

power outlet.

• Unplug the power cord before removing the power supply unit from the

projector.

• If the system has multiple sources of power, disconnect power from the

system by unplugging all power cords from the power supplies.

Caution for Accessibility

Be sure that the power outlet you plug the power cord into is easily accessible

and located as close to the equipment operator as possible. When you need to

disconnect power to the equipment, be sure to unplug the power cord from the

electrical outlet.

Warnings!

• Do not use this product near water.

• Do not place this product on an unstable cart, stand or table. If the product

falls, it could be seriously damaged.

• Slots and openings are provided for ventilation to ensure reliable

operation of the product and to protect it from overheating. These

openings must not be blocked or covered. The openings should never be

blocked by placing the product on a bed, sofa, rug or other similar surface.

• This product should never be placed near or over a radiator or heat

register, or in a built-in installation unless proper ventilation is provided.

• Never push objects of any kind into this product through cabinet slots as

they may touch dangerous voltage points or short-out parts that could

result in a fire or electric shock. Never spill liquid of any kind onto or into

the product.

• To avoid damage of internal components and to prevent battery leakage,

do not place the product on a vibrating surface.

iv

• Never use it under sporting, exercising, or any vibrating environment

which will probably cause unexpected short current or damage rotor

devices, lamp.

Using electrical power

• This product should be operated from the type of power indicated on the

marking label. If you are not sure of the type of power available, consult

your dealer or local power company.

• Do not allow anything to rest on the power cord. Do not locate this

product where people will walk on the cord.

•

If an extension cord is used with this product, make sure that the total ampere

rating of the equipment plugged into the extension cord does not exceed the

extension cord ampere rating. Also, make sure that the total rating of all

products plugged into the wall outlet does not exceed the fuse rating.

• Do not overload a power outlet, strip or receptacle by plugging in too

many devices. The overall system load must not exceed 80% of the branch

circuit rating. If power strips are used, the load should not exceed 80% of

the power strip's input rating.

• This product's AC adapter is equipped with a three-wire grounded plug.

The plug only fits in a grounded power outlet. Make sure the power outlet

is properly grounded before inserting the AC adapter plug. Do not insert

the plug into a non-grounded power outlet. Contact your electrician for

details.

Warning! The grounding pin is a safety feature. Using a power outlet that is

not properly grounded may result in electric shock and/or injury.

Note: The grounding pin also provides good protection from unexpected

noise produced by other nearby electrical devices that may interfere with

the performance of this product.

• Use the product only with the supplied power supply cord set. If you need

to replace the power cord set, make sure that the new power cord meets

the following requirements: detachable type, UL listed/CSA certified, VDE

approved or its equivalent, 4.5 meters (15 feet) maximum length.

Product servicing

Do not attempt to service this product yourself, as opening or removing covers

may expose you to dangerous voltage points or other risks. Refer all servicing to

qualified service personnel.

Unplug this product from the wall outlet and refer servicing to qualified service

personnel when:

• the power cord or plug is damaged, cut or frayed

v

• liquid was spilled into the product

• the product was exposed to rain or water

• the product has been dropped or the case has been damaged

• the product exhibits a distinct change in performance, indicating a need

for service

• the product does not operate normally after following the operating

instructions

Note: Adjust only those controls that are covered by the operating

instructions, since improper adjustment of other controls may result in

damage and will often require extensive work by a qualified technician to

restore the product to normal condition.

Warning! For safety reasons, do not use non-compliant parts when adding

or changing components. Consult your reseller for purchase options.

Your device and its enhancements may contain small parts. Keep them out of

the reach of small children.

Additional safety information

• Do not look into the projector's lens when the lamp is on. The bright may

hurt your eyes.

• Turn on the projector first and then signal sources

• Do not place the product in following environments:

• Space that is poorly ventilated or confined. At least 50cm clearance from walls

and free flow of air around the projector is necessary.

• Locations where temperatures may become excessively high, such as inside of a

car with all windows rolled up.

• Locations where excessive humidity, dust, or cigarette smoke may contaminate

optical components, shortening the life span and darkening the image.

• Locations near fire alarms.

• Locations with an ambient temperature above 40 ºC/104 ºF.

• Locations where the altitudes are higher than 10000 feet.

• Unplug immediately if there is something wrong with your projector. Do

not operate if smoke, strange noise or odor comes out of your projector. It

might cause fire or electric shock. In this case, unplug immediately and

contact your dealer.

• Do not keep using this product to break or drop it. In this case contact your

dealer for inspection.

• Do not face the projector lens to the sun. It can lead to fire.

• When switching the projector off, suggest to ensure the projector

completes its cooling cycle before disconnecting power.

• Do not frequently turn off the main power abruptly or unplug the

projector during operation. The best way is to wait for the fan to turn off

before turning main power off.

vi

• Do not touch air outlet grille and bottom plate which becomes hot.

• Clean the air filter frequently if have. The temperature inside may rise and

cause damage when the filter/ventilation slots clogged with dirt or dust.

• Do not look into the air outlet grille when projector is operating. It may

hurt your eyes.

• Always open the lens shutter or remove the lens cap when the projector is

on.

• Do not block the projector lens with any object when the projector is

under operation as this could cause the object to become heated and

deformed or even cause a fire.

• The lamp becomes extremely hot during operation. Allow the projector to

cool for approximately 45 minutes prior to removing the lamp assembly for

replacement.

• Do not operate lamps beyond the rated lamp life. It could cause it to break

on rare occasions.

• Never replace the lamp assembly or any electronic components unless the

projector is unplugged.

• The product will detect the life of the lamp itself. Please be sure to change

the lamp when is showing warning message.

• When changing the lamp, please allow unit to cool down, and follow all

changing instructions.

• Reset the "Lamp Reset" function from the Onscreen display "OPTIONS |

Lamp Settings" menu after replacing the lamp module.

• Do not attempt to disassemble this projector. There are dangerous high

voltages inside which may hurt you. The only user serviceable part is the

lamp which has its own removable cover. Refer servicing only to suitable

qualified professional service personnel.

• Do not stand the projector on end vertically. It may cause the projector to

fall over, causing injury or damage.

• This product is capable of displaying inverted images for ceiling mount

installation. Only use acer ceiling mount kit for mounting the projector

and ensure it is securely installed.

• The projector should be placed in a horizontal way by means of desktop or

ceiling mount mode only, and its tilt angles should not exceed 3.8 degrees,

otherwise it would cause dramatical decrease of lamp life or severe safety

concern of system malfunction.

3.8°

vii

Caution for Listening

To protect your hearing, follow these instructions.

•

Increase the volume gradually until you can hear clearly and comfortably.

• Do not increase the volume level after your ears have adjusted.

• Do not listen to music at high volumes for extended periods.

• Do not increase the volume to block out noisy surroundings.

• Decrease the volume if you can't hear people speaking near you.

Disposal instructions

Do not throw this electronic device into the trash when discarding. To minimize

pollution and ensure utmost protection of the global environment, please

recycle. For more information on the Waste from Electrical and Electronics

Equipment (WEEE) regulations, visit

http://www.acer-group.com/public/Sustainability/sustainability01.htm

Mercury advisory

For projectors or electronic products containing an LCD/CRT monitor or display:

Lamp(s) inside this product contain mercury and must be recycled or disposed of

according to local, state or federal laws. For more information, contact the

Electronic Industries Alliance at www.eiae.org. For lamp-specific disposal

information, check www.lamprecycle.org

“Lamp(s) contain Mercury,

Dispose Properly.”

viii

First things first

Usage Notes

Do:

• Turn off the product before cleaning.

• Use a soft cloth moistened with mild detergent to clean the display

housing.

• Disconnect the power plug from AC outlet if the product is not being used

for a long period of time.

Don't:

• Block the slots and openings on the unit provided for ventilation.

• Use abrasive cleaners, waxes or solvents to clean the unit.

• Use under the following conditions:

• In extremely hot, cold or humid environments.

• In areas susceptible to excessive dust and dirt.

• Near any appliance that generates a strong magnetic field.

• Place In direct sunlight.

Precautions

Follow all warnings, precautions and maintenance as recommended in this

user's guide to maximize the life of your unit.

Warning:

• Do not look into the projector's lens when the lamp is on. The bright light may hurt

your eyes.

• To reduce the risk of fire or electric shock, do not expose this product to rain or

moisture.

• Please do not open or disassemble the product as this may cause electric shock.

• When changing the lamp, please allow unit to cool down, and follow all changing

instructions.

• This product will detect the life of the lamp itself. Please be sure to change the lamp

when it shows warning messages.

• Reset the "Lamp Reset" function from the Onscreen display "OPTIONS | Lamp

Settings" menu after replacing the lamp module.

• When switching the projector off, please ensure the projector completes its cooling

cycle before disconnecting power.

• Turn on the projector first and then the signal sources.

• Do not use lens cap when projector is in operation.

• When the lamp reaches the end of its life, it will burn out and may make a loud

popping sound. If this happens, the projector will not turn back on until the lamp

module has been replaced. To replace the lamp, follow the procedures listed under

"Replacing the Lamp".

1

English

Table of Contents ............................1

Introduction

...................................... 2

Package Overview ..............................2

Product Overview

...............................3

Main Unit .............................................. 3

Control Panel

....................................... 4

Input/Output Connections

.................... 5

Remote Control

.................................... 6

Installation .......................................7

Connecting to the Projector ................7

Connecting a Computer/Notebook ...... 7

Connecting a Video source

.................. 8

Connect to 3D Video Devices .............9

Using the 3D glasses

........................ 11

Powering On/O the Projector

..........12

Powering On the Projector ................. 12

Powering O the Projector

................ 13

Warning Indicator

............................... 14

Adjusting the Projected Image ..........15

Adjusting the Projector’s Height ........ 15

Adjusting the Projector’s Focus

......... 16

Adjusting Projection Image Size

........ 16

User Controls ................................19

Control Panel & Remote Control ......19

Control Panel ..................................... 19

Remote Control

.................................. 20

On-screen Display Menus ................23

How to operate .................................. 23

IMAGE

............................................... 24

IMAGE | Advanced

............................ 27

DISPLAY

............................................ 32

DISPLAY | 3D

................................... 37

SETUP

............................................... 39

SETUP | Audio Settings

..................... 42

SETUP | Security

............................... 44

SETUP | Network

............................... 46

SETUP | Network| LAN Settings

........ 47

SETUP | Network| Control Settings

... 49

SETUP | Signal (RGB)

....................... 59

SETUP | Signal (Video)

..................... 61

SETUP | Advanced

............................ 62

OPTIONS

........................................... 63

OPTIONS | Lamp Settings

................. 67

OPTIONS | Advanced

........................ 69

OPTIONS | Remote Settings

............. 71

OPTIONS | Filter Settings

.................. 72

OPTIONS | Filter Settings

.................. 73

Appendices .................................... 74

Troubleshooting ................................74

Image Problems ................................. 74

Other Problems

.................................. 76

Remote Control Problems

................. 76

LED Lighting Messages

..................... 77

On Screen Messages

........................ 78

Replacing the Lamp ..........................79

Installing and Cleaning the

Dust Filter

.........................................81

Compatibility Modes

.........................82

Ceiling Mount Installation

..................84

Regulations and safety notices

.........85

Table of Contents

2

English

Introduction

Unpack and inspect the box contents to ensure all parts listed

below are in the box. If something is missing, please contact

Acer customer service.

Package Overview

Standard Accessories

Freeze

Power Switch

L

R

Keystone Volume

Page

-

+

-

+

1 2

Menu

3

3D

4

HDMI

5

VGA

6

Video

7

User1

8

User2

9

User3

Source

0

Resync

Page+Laser

Enter

Projector

Power Cord Remote



CD User Manual



Warranty Card



Quick Start Guide

VGA Cable 2 × AAA Batteries Documentation

3

English

Introduction

Product Overview

Main Unit

 Do not block

projector in/out air

vents.

1. Lamp Cover

2. Control Panel

3. Focus Switch

4. IR Receiver

5. Input/Output Connections

6. Lens

7. Power Socket

8. Speaker

9. IR Camera (Only for

interactive version)

21

6

5

4

3

7

9

8

4

English

Introduction

Control Panel

3

6

9

8

21 4

5

7

1. ON/STANDBY LED

2. Enter

3. TEMP LED

4. LAMP LED

5. Menu

6. Input

7. Four Directional Select Keys

8. Power/Standby button

9. IR Receiver

5

English

Introduction

Input/Output Connections

VGA IN 2 / VGA OUT

SERVICE

RS-232

VGA IN 1

VIDEO

HDMI 2

LAN

AUDIO IN 2

R-AUDIO IN 1-L

AUDIO OUT

AC POWER

DC 12V OUT

3D SYNC

HDMI 1

MICROPHONE

1. Power Socket

2. Kensington

TM

Lock Port

3. RJ45 Connector

4. 3D Sync Connector (5V)

5. RS-232C Connector (9-pin DIN Type)

6. 12V Out Connector

7. USB Connector (Connect to PC for Remote Mouse

function)

8. VGA-Out/VGA2-In Connector

9. VGA1-In/YPbPr Connector (PC Analog Signal/Component

Video Input/HDTV/YPbPr)

10. Composite Video Input Connector

11. HDMI2 Input Connector

12. HDMI1 Input Connector

13. Audio 2 In Connector (3.5mm mini Jack)

14. Composite Audio Input (right/left) Connector

15. Audio Input Connector (microphone)

16. Audio Output Connector (3.5mm mini Jack)

 Remote mouse

requires special

remote.

7

2 1

15 16

13 14

3

45

6

8 9

10 11 12

6

English

Introduction

Remote Control

1. Power on / o

2. Freeze

3. Display blank /

audio mute

4. Mouse left click

5. Enter

6. Laser

7. Page -

8. Keystone - / +

9. Menu

10. Aspect ratio

11. HDMI

12. User 2

13. User 1

14. Source

15. Brightness mode

16. Mouse on / o

17. Mute

18. Mouse right click

19. Four directional

select keys

20. Page +

21. Volume - / +

22. 3D menu on / o

23. VGA

24. Video

25. User 3

26. Numeric keypad

(0-9)

27. Re-sync

 Some keys may

have no function

for models which

do not support

these features.

Freeze

Power Switch

L

R

Keystone Volume

Page

-

+

-

+

1 2

Menu

3

3D

4

HDMI

5

VGA

6

Video

7

User1

8

User2

9

User3

Source

0

Resync

Page+Laser

Enter

4

1

2

3

5

6

13

10

8

7

9

11

12

14

15

27

20

16

17

18

22

23

24

21

26

19

25

7

English

Installation

Connecting a Computer/Notebook

Connecting to the Projector

 Due to the

dierence in

applications for

each country,

some regions may

have dierent

accessories.

 (*) Optional

accessory

1.............................................................................................*RS-232C cable

2...........................................................................*Remote Mouse USB cable

3....................................................................................VGA1-In/YPbPr cable

4...................................................................................................*HDMI cable

5........................................................................................... *Audio 2 In cable

6.....................................................................................................Power cord

7............................................................................................*Audio Out cable

8.....................................................................................*Microphone In cable

9.................................................................................................. *RJ-45 cable

10......................................................................................... *3D emitter cable

11 ............................................................................ *VGA-Out/VGA2-In cable

VGA IN 2 / VGA OUT

SERVICE

RS-232

VGA IN 1

VIDEO

HDMI 2

LAN

AUDIO IN 2

R-AUDIO IN 1-L

AUDIO OUT

AC POWER

3D SYNC

HDMI 1

A OUT

UT

A OUT

MOLEX

E62405SP

R

MICROPHONE

5

1

2

Audio output

3D glasses

3

4

6

7

8

9

10

Microphone input

11

8

English

Installation

Connecting a Video source

 Due to the

dierence in

applications for

each country,

some regions may

have dierent

accessories.

 (*) Optional

accessory

VGA IN 2 / VGA OUT

SERVICE

RS-232

VGA IN 1

VIDEO

HDMI 2

LAN

AUDIO IN 2

R-AUDIO IN 1-L

AUDIO OUT

AC POWER

DC 12V OUT

3D SYNC

HDMI 1

E62405SP

R

MICROPHONE

5

1

2

Audio output

3D glasses

3

4

6

DVD player, Set-top box,

HDTV receiver

1..............................................................................*3 RCA Component cable

2...................................................................................................*HDMI cable

3............................................................................................ *Audio2 In cable

4.............................................................................................. *Audio In cable

5.....................................................................................................Power cord

6............................................................................................*Audio Out cable

7.....................................................................................*Microphone In cable

8...................................................................................................*Video cable

9........................................................................................... *3D emitter cable

DVD player, Blu-ray player, Set-top box, HDTV

receiver, Games console

7

8

9

English

Installation

Connect to 3D Video Devices

 The 3D video

source device

must be

powered on

before the 3D

projector.

 If input video

is normal 2D,

please press

“3D Format”

and switch to

“Auto”.

 If “SBS” is

active, 2D

video content

will not display

correctly.

Once you have connected your devices together with HDMI

cables, as shown in the diagram, you are ready to begin.

Power ON your 3D video source and your 3D projector.

PlayStation

®

3 Games

y Make sure that you have updated your console to the latest

software version.

y Go to the “Settings menu -> Display settings -> Video output ->

HDMI”. Select “Automatic” and follow the on-screen instructions.

y Insert your 3D game disc. Alternatively you can download games

(and 3D updates) via the PlayStation

®

network.

y Launch the game. In the in-game menu, select “Play in 3D”.

Blu-ray 3D™ Player

y Make sure that your player can support 3D Blu-ray™ disc and that

3D output is enabled.

y Insert the 3D Blu-ray™ disc into the player, press “Play”.

3D TV (e.g. SKY 3D, DirecTV)

y Contact your TV service provider to enable any 3D channels on

your channel package.

y Once enabled, switch to the 3D channel.

y You should see two images side-by-side.

y Switch to the “SBS” of the 3D projector. The option is located in

the “DISPLAY” section of the projector OSD menu.

3D Device (e.g. 3D DV/DC) with 2D 1080i side by side signal

output

y Connect your 3D device and switch to out 3D content with 2D

side-by-side output to 3D Projector.

- You should see two images side-by-side.

y Switch to the “SBS” of the 3D projector. The option is located in

the “DISPLAY” section of the projector OSD menu.

If watching 3D content from an HDMI 1.4a source (e.g. 3D Blu-ray)

your 3D glasses should always be in sync. If watching 3D content

from an HDMI 1.3 source (e.g. 3D broadcast using SBS mode) it may

be necessary to use the projector’s 3D Sync-Invert option to optimize

your 3D experience. The option is located in the “DISPLAY ->3D”

section of the projector OSD menu.

10

English

Installation

3D Broadcast 3D Blu-ray™ Disc 3D Console Games

SKY+HD, cable/satellite

box

3D Blu-ray™ Player

PlayStation

®

3

3D DLP

®

Link™ Glasses

Full 3D 1080p DLP

®

Projector

3D RF Glasses 3D Emitter

11

English

Installation

1. To turn ON 3D glasses.

2. Verify that 3D content is being sent to the projector and

signal is compatible with projector specications.

3. Turn on the “3D Mode” (O/ DLP-Link/ VESA 3D -

depending on which type of glasses you are using) of the

3D projector. The option is located in the “3D” section of the

projector OSD menu.

4. Turn on 3D glasses and verify image appears in 3D without

eyestrain.

5. If the image does not appear in 3D, please check 3D

device set up correctly to send out 3D image or not. Or

“SBS” should turn on when input signal is 2D 1080i side-

by-side and repeat previous steps 1 ~ 4.

6. It may be necessary to use projector’s “3D Sync. Invert”

option to optimize your 3D experience. The option is

located in the “3D” section of the projector OSD menu.

7. To turn OFF 3D glasses: Press the “Power” button and hold

until the LED switches o.

8. For more detailed information, please refer to the 3D

glasses user’s guide, or manufacturer's Website.

Using the 3D glasses

 For more

detailed

information,

please refer

to 3D glasses

user’s guide.

12

English

Installation

Powering On/O the Projector

 Turn on the

projector rst and

then select the

signal sources.

 (*) Optional

accessory.

Powering On the Projector

1. Securely connect the power cord and signal cable. When

connected, the On/Standby LED will turn Red.

2. Turn on the lamp by pressing “ ” button either on the top of

the projector or on the remote. The On/Standby LED will now

turn Blue.

The startup screen will display in approximately 10 seconds.

The rst time you use the projector, you will be asked to

select the preferred language and power saving mode.

3. Turn on and connect the source that you want to display

on the screen (computer, notebook, video player, etc). The

projector will detect the source automatically. If not, push

menu button and go to “OPTIONS”.

Make sure that the “Source Lock” has been set to “O”.

If you connect multiple sources at the same time, press the

“Source” button on the Remote Control or direct source keys

on the remote control to switch between inputs.

Freeze

Power Switch

L

R

Keystone Volume

Page

-

+

-

+

1 2

Menu

3

3D

4

HDMI

5

VGA

6

Video

7

User1

8

User2

9

User3

Source

0

Resync

Page+Laser

Enter

or

Page is loading ...

Acer U5330W User manual

This manual is also suitable for

Acer U5330W User manual

Related papers

Other documents