Parts List
Please make sure you have all the parts on this list.
If you’re missing parts, contact us for replacements at
1
A. File cabinet (1)
D. Screws (16)
B. Casters (4)
E. File hangers (2)
C. Locking casters (2)
Required tools not included
Phillips screwdriver
2
Step 1.
Turn cabinet upside down.
Mount LOCKING CASTERS (C)
to the front of the cabinet with
SCREWS (D) using a
Phillips screwdriver.
Repeat for CASTERS (B) on rear
of unit.
Turn cabinet over onto wheels.
Step 2.
Assemble the FILE HANGERS (E)
by sliding the hanger bars into
the clips.
Aach one FILE HANGER (E)
near the front of the drawer.
TIP: Test t your hanging folder
rst to see where the second
hanger should go.
Aach second FILE HANGER (E)
to center of drawer.
Test with hanging folder and
adjust the second le hanger as
necessary.
Assembly Instrucons