2. Danfoss
  3. 080Z4001
080Z4001

Danfoss 080Z4001, 080Z4004, 080Z4006, 080Z4008, 080Z4009, 080Z4014 User guide

  • Hello! I am an AI chatbot trained to assist you with the Danfoss 080Z4001 User guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
AK-SM 800 USB
Program Download
Programming Guide
AK-SM 880 Database Loading
1. Copy program onto a standard USB stick
2. Press ‘Gear’/Configuration button at top right of keypad so you are prompted to login.
Factory password is 12345, then press OK.
3. Open door to right of display, plug USB stick into USB port.
danfoss.us
© Danfoss | DCS (mrb) | 2019.06
AU308672052175
1
© Danfoss | DCS (mrb) | 2019.06
AU308672052175
2
4. Once USB is connected, pop-up window below should appear.
Press ‘5’ to load database.
5. Database will automatically load and controller reset.
After reset, USB stick can be removed.
* If prompt does not appear,
press menu button on keypad
and select ‘7’ for Flash Drive
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products
already on order provided that such alternations can be made without subsequential changes being necessary in specications already agreed.
All trademarks in this material are property of the respecitve companies. Danfoss and Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
/