Leica Rugby 870 Owner's manual

Category
Laser levels
Type
Owner's manual

This manual is also suitable for

Leica Rugby 870/880
User Manual
Version 1.0
English
Rugby 870/880, Introduction 2
Introduction
Purchase Congratulations on the purchase of a Leica Rotating Laser product.
This manual contains important safety directions as well as instructions for setting up
the product and operating it. Refer to "1 Safety Directions" for further information.
Read carefully through the User Manual before you switch on the product.
Product identifica-
tion
The type and serial number of your product are indicated on the type plate.
Always refer to this information when you need to contact your agency or Leica
Geosystems authorised service workshop.
Validity of this
manual
This manual applies to the Rugby 870/880 lasers. Differences between the models are
marked and described.
Available
documentation
Refer to the following resources for all Rugby 870/880 documentation/soft-
ware:
the Leica Rugby CD
• https://myworld.leica-geosystems.com
Name Description/Format
Rugby 870/880
Quick Guide
Provides an overview of the product. Intended as a quick
reference guide.

Rugby 870/880
User Manual
All instructions required in order to operate the product
to a basic level are contained in the User Manual.
Provides an overview of the product together with tech-
nical data and safety directions.
-
Rugby 870/880, Introduction 3
myWorld@Leica Geosystems (https://myworld.leica-geosystems.com) offers a
wide range of services, information and training material.
With direct access to myWorld, you are able to access all relevant services whenever
it is convenient for you, 24 hours a day, 7 days per week. This increases your efficiency
and keeps you and your equipment instantly updated with the latest information from
Leica Geosystems.
Service Description
myProducts Add all Leica Geosystems products that you and your company
own. View detailed information on your products, buy additional
options or Customer Care Packages (CCPs), update your products
with the latest software and keep up-to-date with the latest
documentation.
myService View the service history of your products in Leica Geosystems
Service Centres and detailed information on the services
performed on your products. For your products that are
currently in Leica Geosystems Service Centres view the current
service status and the expected end date of service.
mySupport Create new support requests for your products that will be
answered by your local Leica Geosystems Support Team. View
the complete history of your Support and view detailed informa-
tion on each request in case you want to refer to previous
support requests.
myTraining Enhance your product knowledge with the Leica Geosystems
Campus - Information, Knowledge, Training. Study the latest
online training material or download training material on your
products. Keep up-to-date with the latest News on your prod-
ucts and register for Seminars or Courses in your country.
myTrustedServices Offers increased productivity while at the same time providing
maximum security.
• myExchange
With myExchange you can exchange any files/objects from
your computer to any of your Leica Exchange Contacts.
• mySecurity
If your instrument is ever stolen, a locking mechanism is avail-
able to ensure that the instrument is disabled and can no
longer be used.
Rugby 870/880, Table of Contents 4
Table of Contents
In this manual Chapter Page
1Safety Directions 6
1.1 General 6
1.2 Definition of Use 7
1.3 Limits of Use 7
1.4 Responsibilities 7
1.5 Hazards of Use 8
1.6 Laser Classification 10
1.6.1 General 10
1.6.2 Rugby 870/880 10
1.7 Electromagnetic Compatibility EMC 11
1.8 FCC Statement, Applicable in U.S. 12
2 Description of the System 14
2.1 System Components 14
2.2 Rugby Laser Components 15
2.3 Case Components 15
2.4 Setup 16
3Operation 17
3.1 Control Panel 17
3.2 Turning the Rugby on and off 17
3.3 The LCD Display 18
3.4 Grade Entry 19
3.5 Axis Identification 21
3.6 Conversion of Slope Into Percent of Grade 21
3.7 Alignment of the Axes 22
3.8 Precise Alignment of the Axes 22
3.9 Laydown Operation (Rugby 880 Only) 23
4 RC800 Remote Control 24
4.1 Description of the Remote Control 24
4.2 Pairing the Rugby 870/880 with the RC800 Remote Control 25
4.3 Connecting Screens for the Remote Control 26
5Receiver 27
5.1 The Rod Eye Receivers 27
5.1.1 Rod Eye 140, Classic Receiver 27
5.1.2 Rod Eye 160, Digital Receiver 27
5.1.3 Rod Eye 180, Digital RF Receiver 28
5.2 Using the Rod Eye 180 Receiver with the Rugby 28
5.3 Pairing the Rod Eye 180 with the Rugby 870/880 29
6 Rugby 870/880 Menu 30
6.1 Access and Navigation 30
6.2 Menu Set 1 31
6.3 Menu Set 2 34
6.4 Menu Set 3 36
7RC800 Menu 41
Rugby 870/880, Table of Contents 5
8Applications 42
8.1 Setting Forms 42
8.2 Checking Grades 43
8.3 Entering Grades 44
8.4 Smart Targeting (Grade Matching) 45
8.5 Smart Target Lock (Grade Matching and Monitoring) 46
8.6 Automatic Axis Alignment 47
8.7 Axis Alignment plus Smart Target Lock (Axis Alignment and
Monitoring) 49
8.8 Dual Receiver Setups 49
9 Batteries 50
9.1 Operating Principles 50
9.2 Battery for Rugby 51
10 Accuracy Adjustment 54
10.1 Checking the Level Accuracy 54
10.2 Adjusting the Level Accuracy 55
10.3 Adjusting the Vertical Accuracy 57
11 Semi-Automatic Calibration 58
12 Troubleshooting 61
13 Care and Transport 64
13.1 Transport 64
13.2 Storage 64
13.3 Cleaning and Drying 65
14 Technical Data 66
14.1 Conformity to National Regulations 66
14.2 General Technical Data of the Laser 66
14.2.1 RC800 Remote Control 68
15 Lifetime Manufacturer’s Warranty 68
16 Accessories 69
Index 70
Rugby 870/880, Safety Directions 6
1Safety Directions
1.1 General
Description The following directions enable the person responsible for the product, and the
person who actually uses the equipment, to anticipate and avoid operational hazards.
The person responsible for the product must ensure that all users understand these
directions and adhere to them.
About Warning
Messages
Warning messages are an essential part of the safety concept of the instrument. They
appear wherever hazards or hazardous situations can occur.
Warning messages...
make the user alert about direct and indirect hazards concerning the use of the
product.
contain general rules of behaviour.
For the users‘ safety, all safety instructions and safety messages shall be strictly
observed and followed! Therefore, the manual must always be available to all persons
performing any tasks described herein.
DANGER, WARNING, CAUTION and NOTICE are standardized signal words for iden-
tifying levels of hazards and risks related to personal injury and property damage. For
your safety it is important to read and fully understand the table below with the
different signal words and their definitions! Supplementary safety information
symbols may be placed within a warning message as well as supplementary text.
Type Description
DANGER Indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
WARNING Indicates a potentially hazardous situation or an unintended
use which, if not avoided, could result in death or serious injury.
CAUTION Indicates a potentially hazardous situation or an unintended
use which, if not avoided, may result in minor or moderate
injury.
NOTICE Indicates a potentially hazardous situation or an unintended
use which, if not avoided, may result in appreciable material,
financial and environmental damage.
Important paragraphs which must be adhered to in practice as
they enable the product to be used in a technically correct and
efficient manner.
Rugby 870/880, Safety Directions 7
1.2 Definition of Use
Intended use The product casts a horizontal laser plane or a laser beam for the purpose of align-
ment.
The laser beam can be detected by means of a laser detector.
Remote control of product.
Data communication with external appliances.
Reasonably fore-
seeable misuse
Use of the product without instruction.
Use outside of the intended use and limits.
Disabling safety systems.
Removal of hazard notices.
Opening the product using tools, for example screwdriver, unless this is permitted
for certain functions.
Modification or conversion of the product.
Use after misappropriation.
Use of products with recognisable damages or defects.
Use with accessories from other manufacturers without the prior explicit approval
of Leica Geosystems.
Inadequate safeguards at the working site.
Deliberate dazzling of third parties.
Controlling of machines, moving objects or similar monitoring application without
additional control- and safety installations.
1.3 Limits of Use
Environment Suitable for use in an atmosphere appropriate for permanent human habitation: not
suitable for use in aggressive or explosive environments.
DANGER Local safety authorities and safety experts must be contacted before working in
hazardous areas, or close to electrical installations or similar situations by the person
in charge of the product.
1.4 Responsibilities
Manufacturer of
the product
Leica Geosystems AG, CH-9435 Heerbrugg, hereinafter referred to as Leica Geosys-
tems, is responsible for supplying the product, including the user manual and original
accessories, in a safe condition.
Person responsible
for the product
The person responsible for the product has the following duties:
To understand the safety instructions on the product and the instructions in the
user manual.
To ensure that it is used in accordance with the instructions.
To be familiar with local regulations relating to safety and accident prevention.
To inform Leica Geosystems immediately if the product and the application
becomes unsafe.
To ensure that the national laws, regulations and conditions for the operation of
e.g. radio transmitters or lasers are respected.
Rugby 870/880, Safety Directions 8
1.5 Hazards of Use
CAUTION Watch out for erroneous measurement results if the product has been dropped or has
been misused, modified, stored for long periods or transported.
Precautions:
Periodically carry out test measurements and perform the field adjustments indicated
in the user manual, particularly after the product has been subjected to abnormal use
and before and after important measurements.
DANGER Because of the risk of electrocution, it is dangerous to use poles and extensions in the
vicinity of electrical installations such as power cables or electrical railways.
Precautions:
Keep at a safe distance from electrical installations. If it is essential to work in this
environment, first contact the safety authorities responsible for the electrical instal-
lations and follow their instructions.
NOTICE With the remote control of products, it is possible that extraneous targets will be
picked out and measured.
Precautions:
When measuring in remote control mode, always check your results for plausibility.
WARNING If the product is used with accessories, for example masts, staffs, poles, you may
increase the risk of being struck by lightning.
Precautions:
Do not use the product in a thunderstorm.
WARNING Inadequate securing of the working site can lead to dangerous situations, for example
in traffic, on building sites, and at industrial installations.
Precautions:
Always ensure that the working site is adequately secured. Adhere to the regulations
governing safety and accident prevention and road traffic.
CAUTION If the accessories used with the product are not properly secured and the product is
subjected to mechanical shock, for example blows or falling, the product may be
damaged or people can sustain injury.
Precautions:
When setting-up the product, make sure that the accessories are correctly adapted,
fitted, secured, and locked in position.
Avoid subjecting the product to mechanical stress.
WARNING During the transport, shipping or disposal of batteries it is possible for inappropriate
mechanical influences to constitute a fire hazard.
Precautions:
Before shipping the product or disposing of it, discharge the batteries by running the
product until they are flat.
When transporting or shipping batteries, the person in charge of the product must
ensure that the applicable national and international rules and regulations are
observed. Before transportation or shipping contact your local passenger or freight
transport company.
Rugby 870/880, Safety Directions 9
WARNING During dynamic applications, for example stakeout procedures there is a danger of
accidents occurring if the user does not pay attention to the environmental conditions
around, for example obstacles, excavations or traffic.
Precautions:
The person responsible for the product must make all users fully aware of the existing
dangers.
WARNING If you open the product, either of the following actions may cause you to receive an
electric shock.
Touching live components
Using the product after incorrect attempts were made to carry out repairs
Precautions:
Do not open the product. Only Leica Geosystems authorised service workshops are
entitled to repair these products.
WARNING If the product is improperly disposed of, the following can happen:
If polymer parts are burnt, poisonous gases are produced which may impair health.
If batteries are damaged or are heated strongly, they can explode and cause
poisoning, burning, corrosion or environmental contamination.
By disposing of the product irresponsibly you may enable unauthorised persons to
use it in contravention of the regulations, exposing themselves and third parties to
the risk of severe injury and rendering the environment liable to contamination.
Precautions:
Product-specific treatment and waste management information can be downloaded
from the Leica Geosystems home page at http://www.leica-
geosystems.com/treatment or received from your Leica Geosystems dealer.
WARNING Only Leica Geosystems authorised service workshops are entitled to repair these prod-
ucts.
WARNING High mechanical stress, high ambient temperatures or immersion into fluids can cause
leakage, fire or explosions of the batteries.
Precautions:
Protect the batteries from mechanical influences and high ambient temperatures. Do
not drop or immerse batteries into fluids.
WARNING If battery terminals are short circuited e.g. by coming in contact with jewellery, keys,
metalized paper or other metals, the battery can overheat and cause injury or fire, for
example by storing or transporting in pockets.
Precautions:
Make sure that the battery terminals do not come into contact with metallic objects.
The product must not be disposed with household waste.
Dispose of the product appropriately in accordance with the national
regulations in force in your country.
Always prevent access to the product by unauthorised personnel.
Rugby 870/880, Safety Directions 10
1.6 Laser Classification
1.6.1 General
General The following chapters provide instructions and training information about laser safety
according to international standard IEC 60825-1 (2014-05) and technical report IEC TR
60825-14 (2004-02). The information enables the person responsible for the product
and the person who actually uses the equipment, to anticipate and avoid operational
hazards.
1.6.2 Rugby 870/880
General The rotating laser built into the product produces a visible laser beam which emerges
from the rotating head.
The product described in this section is classified as laser class 1 in accordance with:
IEC 60825-1 (2014-05): "Safety of laser products"
These products are safe for momentary exposures but can be hazardous for deliberate
staring into the beam. The beam may cause dazzle, flash-blindness and after-images,
particularly under low ambient light conditions.
Rugby 870:
Rugby 880:
According to IEC TR 60825-14 (2004-02), products classified as laser class 1,
class 2 and class 3R do not require:
laser safety officer involvement,
protective clothes and eyewear,
special warning signs in the laser working area
if used and operated as defined in this User Manual due to the low eye hazard
level.
National laws and local regulations could impose more stringent instructions
for the safe use of lasers than IEC 60825-1 (2014-05) and IEC TR 60825-14
(2004-02).
Description Value
Maximum peak radiant power 0.65 mW / 2.2 mW
Pulse duration (effective) 500 ms / 2.9 ms, 1.4 ms
Pulse repetition frequency 1 Hz / 5 Hz, 10 Hz
Beam divergence 0.2 mrad
Wavelength 635 nm
Description Value
Maximum peak radiant power 0.65 mW / 2.2 mW
Pulse duration (effective) 500 ms / 2.9 ms, 1.4 ms
Pulse repetition frequency 1 Hz / 5 Hz, 10 Hz
Beam divergence 0.2 mrad
Wavelength 635 nm
Rugby 870/880, Safety Directions 11
Labelling
1.7 Electromagnetic Compatibility EMC
Description The term Electromagnetic Compatibility is taken to mean the capability of the product
to function smoothly in an environment where electromagnetic radiation and electro-
static discharges are present, and without causing electromagnetic disturbances to
other equipment.
WARNING Electromagnetic radiation can cause disturbances in other equipment.
Although the product meets the strict regulations and standards which are in force in
this respect, Leica Geosystems cannot completely exclude the possibility that other
equipment may be disturbed.
CAUTION There is a risk that disturbances may be caused in other equipment if the product is
used with accessories from other manufacturers, for example field computers,
personal computers or other electronic equipment, non-standard cables or external
batteries.
Precautions:
Use only the equipment and accessories recommended by Leica Geosystems. When
combined with the product, they meet the strict requirements stipulated by the guide-
lines and standards. When using computers or other electronic equipment, pay atten-
tion to the information about electromagnetic compatibility provided by the manufac-
turer.
CAUTION Disturbances caused by electromagnetic radiation can result in erroneous measure-
ments.
Although the product meets the strict regulations and standards which are in force in
this respect, Leica Geosystems cannot completely exclude the possibility that the
product may be disturbed by intense electromagnetic radiation, for example, near
radio transmitters, two-way radios or diesel generators.
Precautions:
Check the plausibility of results obtained under these conditions.
CAUTION If the product is operated with connecting cables attached at only one of their two
ends, for example external supply cables, interface cables, the permitted level of elec-
tromagnetic radiation may be exceeded and the correct functioning of other products
may be impaired.
Precautions:
While the product is in use, connecting cables, for example product to external battery,
product to computer, must be connected at both ends.
a) Laser beam
007816_002
a
Rugby 870/880, Safety Directions 12
Radios or digital
cellular phones
Use of product with radio or digital cellular phone devices:
WARNING Electromagnetic fields can cause disturbances in other equipment, in installations, in
medical devices, for example pacemakers or hearing aids and in aircraft. It can also
affect humans and animals.
Precautions:
Although the product meets the strict regulations and standards which are in force in
this respect, Leica Geosystems cannot completely exclude the possibility that other
equipment can be disturbed or that humans or animals can be affected.
Do not operate the product with radio or digital cellular phone devices in the vicinity
of filling stations or chemical installations, or in other areas where an explosion
hazard exists.
Do not operate the product with radio or digital cellular phone devices near to
medical equipment.
Do not operate the product with radio or digital cellular phone devices in aircraft.
1.8 FCC Statement, Applicable in U.S.
The greyed paragraph below is only applicable for products without radio.
WARNING
WARNING Changes or modifications not expressly approved by Leica Geosystems for compliance
could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful interfer-
ence in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Rugby 870/880, Safety Directions 13
Labelling Rugby
870/880
Labelling Rod Eye
Labelling Rod Eye
Labelling Rod Eye
Labelling RC800
Power : 8.4V / 0.5A
Art.No.: 795436
Made in China
Contains FCC ID: RFD-CT100 IC ID: 3177A-CT100
Serial Number: 13148802500
Type: Rugby 880
Power : 8.4V / 0.5A
Art.No.: 795435
Made in China
Contains FCC ID: RFD-CT100 IC ID: 3177A-CT100
Serial Number: 13148702500
Type: Rugby 870
Complies with FDA performance standards for
laser products except for deviations pursuant to
Laser Notice Nr. 50 July 24, 2007
This device complies with part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) This device may not
cause harmful interference, and (2) This
device must accept any interference
received, including interference that
may cause undesired operation.
Leica Geosystems AG
CH-9435 Heerbrugg
007817_002
Rod Eye 140:
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
CH-9435 Heerbrugg
Swiss Technology
by Leica Geosystems
Power : 3V / 60mA
Art.No.: 785493
Made in China
Type: RE140
005146_001
Rod Eye 160:
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
CH-9435 Heerbrugg
Swiss Technology
by Leica Geosystems
Power : 3V / 60mA
Art.No.: 785492
Made in China
Type: RE160
004661_001
Rod Eye 180
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
CH-9435 Heerbrugg
Swiss Technology
by Leica Geosystems
Power : 3V / 100mA
Art.No.: 832396
Made in China
Contains FCC ID: RFD-CT100 IC ID: 3177A-CT100
Type: RE180A
004662_002
RC800
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Type: RC800
Power : 3V / 100mA
Art.No.: 789933
Made in China
Leica Geosystems AG
CH-9435 Heerbrugg
Contains FCC ID: RFD-CT300 IC ID: 3177A-CT300
007818_001
Rugby 870/880, Description of the System 14
2 Description of the System
2.1 System Components
General description The Rugby 870 and the Rugby 880 are laser tools for general construction, levelling
and slope applications such as
•Setting forms,
Levelling to grade,
Controlling depths for excavations.
If set up within the self-levelling range, the Rugby automatically levels to create an
accurate horizontal or vertical (Rugby 880 only) or sloped plane of laser light.
Once the Rugby has levelled, the head starts rotating and the Rugby is ready for use.
30 seconds after the Rugby has completed the levelling, the H.I.Alert system becomes
active and protects the Rugby against changes in elevation caused by movement of
the tripod to ensure accurate work.
Area of application Single grade
Dual grade
Available system
components
The delivered components depend on the package ordered.
The Rugby 870 is a single grade laser; it
produces an accurate plane of laser light for
applications which require level (1) or single
slope (2).
The Rugby 880 is a dual grade laser; it
produces an accurate plane of laser light for
applications which require level (1), single
slope (2) or dual slope (3).
1
2
1
23
007819_001
Rod Eye 180
Rugby 870/880
Li-Ion/Alkaline
RC800
Rugby 870/880, Description of the System 15
2.2 Rugby Laser Components
Rugby laser compo-
nents
2.3 Case Components
Case components
a) Plate for optional scope
b) Carry Handle
c) LCD Display
d) Control Panel
e) Battery compartment
007820_001
a
b
c
d
e
a) Rugby laser
b) Rod eye receiver mounted on the bracket
c) Li-Ion battery pack or Alkaline battery pack
d) RC800 remote control
e) 2x AA-cell battery
f) User Manual/CD
g) Second receiver (can be purchased separately)
h) 4 x D-cell battery (for alkaline versions only)
i) Charger (for Li-Ion versions only)
j) Optional scope assembly
007821_001
a
b
c
d
e
f
g
h
i
j
Rugby 870/880, Description of the System 16
2.4 Setup
Location Keep the location clear of possible obstructions that could block or reflect the laser
beam.
Place the Rugby on a stable ground. Ground vibration and extremely windy condi-
tions can affect the operation of the Rugby.
When working in a very dusty environment place the Rugby up-wind so the dirt is
blown away from the laser.
Setting up on a
tripod
Attach the Rugby securely to a tripod or laser trailer, or mount on a stable level
surface.
Always check the tripod or laser trailer before attaching the Rugby. Make sure all
screws, bolts and nuts are tight.
If a tripod has chains, they should be slightly loose to allow for thermal expansion
during the day.
Secure the tripod on extremely windy days.
Step Description
1. Set up the tripod.
2. Place the Rugby on the tripod.
3. Tighten the screw on the underside of the tripod to secure the Rugby on the
tripod.
007822_001
Rugby 870/880, Operation 17
3Operation
3.1 Control Panel
Overview
Control panel -
functions
3.2 Turning the Rugby on and off
Turning on and off Press the Power Button to turn on or off the Rugby.
After turning on:
The LCD display turns on and displays the current status of the Rugby.
If set up within the +/-6° self-levelling range (horizontal or vertical), the Rugby
automatically levels to create an accurate horizontal plane of laser light.
Once levelled, the head starts rotating and Rugby is ready for use.
If activated, the H.I.Alert system becomes active 30 seconds after completing the
levelling. The H.I.Alert system protects the laser against changes in elevation
caused by movement or settling of the tripod.
The self-levelling system and the H.I.Alert function continue to monitor the position
of the laser beam to ensure consistent and accurate work.
a) LCD display
b) Grade button
c) Left and right arrow buttons
d) Up and down arrow buttons
e) Status LED
f) Power button
007823_001
a
f
b
cc
d
d
e
LCD display Displays all required user information.
Grade button Press to start grade entry mode.
Left and right arrow
buttons
Press to display and move the cursor for grade entry.
Press both simultaneously to enter the Rugby menu.
Up and down arrow
buttons
Press to change the grade displayed.
Press both simultaneously to reset the grade value to
zero.
Power button Press to turn on or off the Rugby.
Status LED Indicates the level status of the Rugby.
Rugby 870/880, Operation 18
3.3 The LCD Display
Main Display The LCD display shows all the information that is required to operate the Rugby.
Start-up Screens When you turn on the Rugby, the LCD displays the Leica welcome screen, the customer
name screen and the information screen.
Rugby 870 Main Display Rugby 880 Main Display
a) X-axis Grade Value
b) Y-axis Grade Value (Rugby 880 only)
c) Beam Masking
d) Radio Indication
e) Battery Level Indication
f) H.I. Indication
g) Head Speed
007585_001
a
cd
ef g
007586_001
cdef g
a
b
Leica welcome screen
Customer name screen:
This screen only appears if you enabled it in the menu.
Refer to 6.4" Customer Name Settings".
Information screen:
This screen displays the unit model number, serial number,
software revision level and the hours of use.
007587 001
007588 001
007589_001
Rugby 870/880, Operation 19
3.4 Grade Entry
Direct Grade Entry Step Description
1. Rugby 870/880:
To start grade entry mode press the Grade Button once.
To restore the last set grade(s), press and hold the Grade Button for
1.5 seconds.
The X-axis grade value is displayed
:
X-Axis grade entry (Rugby 870) X-Axis grade entry (Rugby 880)
2. To change the grade value press the Up or Down Arrow Buttons.
3. Rugby 880 only:
To enter grade on the Y-axis press the Grade Button a second time.
Only the Y-axis grade value is displayed
:
Y-Axis grade entry (Rugby 880)
4. To change the grade value press the Up or Down Arrow Buttons.
5. To exit grade entry mode, press the Grade Button until the main display is
shown.
OR:
Wait for 8 seconds. The Rugby automatically returns to the main display.
007592_001
007590_001
007591_001
Rugby 870/880, Operation 20
Grade Entry by Digit While in grade entry mode, you can easily change the plus/minus sign or individual
digits.
Reset Grade Value
to Zero
While in grade entry mode, you can quickly change the grade value back to zero by
pressing the Up and Down Arrow Buttons simultaneously.
Grade Capability
(Rugby 880 only)
The Rugby 880 can have up to 10.00% grade simultaneously in both the X and Y axes
or up to 15.00% grade in one axis.
Entering grades above 10.00% in one axis is only possible if the cross axis grade is ±3%
or lower.
If you try to enter grades greater than 3% or 10%, a notice appears on the
screen when you press the button.
Step Description
Press the Grade Button to enter the grade entry mode.
1. Press the Left or Right Arrow Buttons to create a
cursor. The cursor always appears on the
plus/minus sign.
2. Press the Up or Down Arrow Buttons to change the plus/minus sign.
3. Press the Left or Right Arrow Buttons to move
the cursor.
4. Press the Up or Down Arrow Buttons to change a digit.
5. To exit grade entry mode, press the Grade Button until the main display is
shown.
OR:
Wait for 8 seconds. The Rugby automatically returns to the main display.
007593_001
007594_001
X > 3.000% X > 10.00%
007595_001 007596_001
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72

Leica Rugby 870 Owner's manual

Category
Laser levels
Type
Owner's manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI