ERA LAL0032, LAL0235, LAL0236, LAL0238 Operating instructions

Hello! I am an AI chatbot trained to assist you with the ERA LAL0032 Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!

Door Pair Latch Rebating Instructions

LATCHREB

Follow the step by step guide for fitting tubular latches to a door pair.

Rebate adjoining

door sides

Align both doors and mark the

centre line From the fitted latch

tongue.

Remove receiver plate and

chisel out to shape.

Note: Ensure recess is made

for latch.

Latch Recess

Fit the receiver plate and pilot drill the screw fixing

positions. Secure the plate using screws.

Position the latch receiver plate over

the marked centre line. Align drill

holes for fixing screws with the

centre line. Mark around plate on

the top rebate section.

Mark centre line & drill hole for

tubular latch and handle

Fit latch

Mark around latch

Fit latch to the side

Pilot drill fixing holes and

secure with screws

Remove latch and

chisel out so latch will

sit flush when fitted

12mm

1

5 6

7 8

2 3 4

HD113030

/

Other documents