DataCard UltraGrafix Select User manual

ImageCard® Color Printers

UltraGrafix® Monochrome Printers

May 2003

Part No. 539123-101

User’s Guide for

Select™ Printers

ii

User’s Guide for Select™ Platinum™ Series Printers

Please note and heed the WARNING and CAUTION labels that have been placed on

the equipment for your safety. Please do not attempt to operate or repair this

equipment without adequate training.

Liability statement

This Datacard® product has been built to the high standards of DataCard Corporation.

See “Safety and compliance” on page A-1 for the statement of liability.

Regulatory compliance

This Datacard product conforms to regulatory requirements as specified in North

America and Europe. See “Safety and compliance” on page A-1 for detailed

regulatory compliance information.

Trademark acknowledgments

Trademark, service mark, and copyright acknowledgments are listed in “Safety and

compliance” on page A-1.

Proprietary Notice

All drawings and information herein are the property of DataCard Corporation.

Revision Log: User’s Guide for Select™ Platinum™ Series Printers

Datacard

11111 Bren Road West

Minnetonka, MN 55343-9015

www.datacard.com

952.933.1223

Fax: 952.933.7971

Revision Date Affected Pages Description of Changes

A July 2002 All Initial release for Platinum Series

B Oct 2002 A-1 to A-3 Add compliance statements for Taiwan and

Japan. Update specifications for Europe.

C May 2003 i-ii, Ch 1, Ch 3, Ch 5, Ch 7, Ap D Update phone and fax numbers, driver

information, and smart card information.

iii

User’s Guide for Select™ Platinum™ Series Printers

Contents

Section 1: Operating the Printer

Chapter 1: Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-1

About this manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-2

Audience . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-2

About the Select printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-2

Printer models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-3

Printer features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-5

Chapter 2: Using the printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-1

Tips for success . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-2

Loading cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-3

Loading the print ribbon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-5

Powering on the printer and PC . . . . . . . . . . . . . . . . . . . . . . . . .2-7

Ready button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-8

Status light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-9

Making cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-10

Operating tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-12

Removing cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-12

Responding to messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-13

Shutting down the printer and PC . . . . . . . . . . . . . . . . . . . . . .2-14

Chapter 3: Using the printer driver . . . . . . . . . . . . . . . . . . . . . . . . . .3-1

Working with Properties and other driver dialog boxes . . . . .3-1

Tips for Properties, Printing Preferences, and Default

Document Properties . . . . . . . . . . . . . . . . . . . . . . . . .3-1

Properties for Windows Me & 98 . . . . . . . . . . . . . . . . . . . . . . .3-2

Properties & Printing Preferences for Windows 2000 & XP . .3-4

Properties and Default Document Properties for Windows NT 3-7

Using the Printer Toolbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-9

Opening and using the Printer Toolbox . . . . . . . . . . . . . . . . .3-11

Viewing Printer Toolbox information . . . . . . . . . . . . . . . . . . .3-12

Chapter 4: Maintaining the printer . . . . . . . . . . . . . . . . . . . . . . . . . .4-1

Running a cleaning cycle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-2

Using the printer cleaning card . . . . . . . . . . . . . . . . . . . . . . . .4-2

Replacing the cleaning roller sleeve . . . . . . . . . . . . . . . . . . . .4-3

Using the magnetic stripe cleaning card . . . . . . . . . . . . . . . . . .4-5

Cleaning the printer rollers . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-6

Using the duplex cleaning card . . . . . . . . . . . . . . . . . . . . . . . . .4-9

Cleaning tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-10

Cleaning the printhead . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-11

Replacing the printhead cartridge . . . . . . . . . . . . . . . . . . . . . .4-12

Chapter 5: Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-1

Troubleshooting guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-2

If you think the printer is not working . . . . . . . . . . . . . . . . . . . .5-3

Making and evaluating test cards . . . . . . . . . . . . . . . . . . . . . . . .5-3

iv

User’s Guide for Select™ Platinum™ Series Printers

Printer test card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-5

Windows test page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-6

Magnetic stripe test card . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-7

Problems with card appearance . . . . . . . . . . . . . . . . . . . . . . . . .5-8

Print module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-9

Topcoat (T panel) applied using the print module . . . . . . . . .5-15

Obtaining service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-16

When to obtain service . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-16

Packing the printer for shipping . . . . . . . . . . . . . . . . . . . . . . . .5-16

Section 2: Installing the Printer

Chapter 6: Before you install . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-1

Installation audience . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-2

General requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-2

Selecting the site . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-3

Environmental requirements . . . . . . . . . . . . . . . . . . . . . . . . . .6-3

Electrical requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-3

Physical requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-3

PC and software specifications . . . . . . . . . . . . . . . . . . . . . . . . .6-4

ID system installation sequence . . . . . . . . . . . . . . . . . . . . . . . . .6-5

Chapter 7: Install the printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-1

Unpacking the printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-2

Who to call for assistance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-3

Connecting cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-3

Connecting an optional smart card cable . . . . . . . . . . . . . . . .7-6

Preparing the printer for driver installation . . . . . . . . . . . . . . . .7-8

Installing the printer driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-8

Installation choices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-9

Changing required printer settings . . . . . . . . . . . . . . . . . . . . .7-18

Printing sample cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-19

Setup tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-19

Changing optional settings . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-20

Setting printer permissions . . . . . . . . . . . . . . . . . . . . . . . . . . .7-21

Section 3: Reference Information

Appendix A: Safety and compliance . . . . . . . . . . . . . . . . . . . . . . . . A-1

Regulatory compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1

Notice for USA (FCC notice) . . . . . . . . . . . . . . . . . . . . . . . . . A-1

Notice for Canada . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1

Notice for the European Union . . . . . . . . . . . . . . . . . . . . . . . A-1

Notice for Taiwan and China . . . . . . . . . . . . . . . . . . . . . . . . . A-2

Notice for Japan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2

Notice to Users of Printers Equipped with Contactless

Smart Card Coupler . . . . . . . . . . . . . . . . . . . . . . . . . A-2

Liability statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2

Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2

Safe environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-3

v

User’s Guide for Select™ Platinum™ Series Printers

Safe human interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-3

Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-3

Appendix B: Supplies and cards . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1

Personalization supplies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-2

Print ribbons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-2

Supply roll storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-3

Cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-3

Card specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-3

Card quality guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-5

Card storage specifications . . . . . . . . . . . . . . . . . . . . . . . . . . B-6

Cleaning supplies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-6

Printer cleaning card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-6

Replaceable cleaning sleeve . . . . . . . . . . . . . . . . . . . . . . . . . B-7

Cleaning kits (optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-8

Magnetic stripe cleaning card . . . . . . . . . . . . . . . . . . . . . . . . B-8

Duplex cleaning card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-8

Cleaning pen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-9

Printer driver CD-ROM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-9

Printer components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-11

Printhead cartridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-11

Print ribbon cartridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-12

Card cartridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-12

Cleaning roller spindle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-12

Data cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-12

Power cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-13

Smart card cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-14

Replacement keys for optional locks . . . . . . . . . . . . . . . . . . B-14

Related publications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-14

Appendix C: PC port settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-1

PC port settings for all operating systems . . . . . . . . . . . . . . . C-2

PC settings for Windows 2000, XP & NT 4.0 . . . . . . . . . . . . . . C-5

Setting parallel port values . . . . . . . . . . . . . . . . . . . . . . . . . . C-5

Setting a smart card serial port—Windows 2000, XP, and NT C-6

PC settings for Windows Me and 98 . . . . . . . . . . . . . . . . . . . . C-9

Setting parallel port values—Windows Me and 98 . . . . . . . . C-9

Setting a smart card port for Windows Me & 98 . . . . . . . . . C-10

Appendix D: Magnetic stripe encoding . . . . . . . . . . . . . . . . . . . . . D-1

Magnetic stripe setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-1

Magnetic stripe escapes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-3

Enabling magnetic stripe escapes . . . . . . . . . . . . . . . . . . . . . D-3

Using magnetic stripe escapes . . . . . . . . . . . . . . . . . . . . . . . D-4

IATA, ABA, and TTS character sets . . . . . . . . . . . . . . . . . . . . . D-6

NTT character set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-7

Magnetic Stripe settings used by the Select printer . . . . . . . . D-8

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

vi

User’s Guide for Select™ Platinum™ Series Printers

User’s Guide for Select™ Platinum Series™ Printers

1

Overview

This chapter presents the following:

• The purpose of this manual

• Who should use this manual

• The Datacard® Select™ Platinum™ Series photo ID printer, including a

description of the printer, the models available, and their components

1-2 Overview

User’s Guide for Select™ Platinum Series™ Printers

About this manual

This manual provides detailed information about the Datacard® Select™ Platinum™

Series photo ID printer. The first section provides operators with information about the

printer and how to use it. The second section provides installers with requirements for

installation and installation procedures. The third section provides reference

information.

This User Guide works with the online e-Guide, which you can see using the desktop

icon installed with the printer driver. Figure 1-1 shows the e-Guide icon.

Figure 1-1: Desktop icon for the e-Guide

This guide describes the current printer driver. (At the time of printing, the current

printer driver is the SmartDriver version 5.1.)

Audience

To operate the printer, you must have the following skills:

• Ability to read and understand written and graphical instructions

• Ability to operate a personal computer (PC)

• Experience with Microsoft® Windows® 2000, Windows XP, Windows 98,

Windows Me, or Windows NT®

• Ability to load supplies

• Ability to perform simple troubleshooting using written and graphical instructions

For the skills needed for installation, see “Installation audience” on page 6-2.

About the Select printer

The Select photo ID printer includes the printer and a printer driver which runs on a

PC. The printer uses supplies when printing cards, including:

• Platinum™ Series print ribbon

• Replaceable cleaning sleeves

• Blank cards

The Select printer prints full-color or monochrome images on one or both sides of

PVC cards. The images printed can include photos, text, logos, barcodes and

digitized signatures. The printer can perform additional personalization tasks, such as

encoding magnetic stripe data and sending data to smart card chips. See “Printer

models” on page 1-3 for details about which combinations are supported.

The printer driver receives digital information from a card creation application and

processes the data to send to the printer. When the printer receives the data, it prints

Overview 1-3

User’s Guide for Select™ Platinum Series™ Printers

the card. The driver keeps track of the progress of the card in the printer and sends

data for the next card as soon as the printer is ready and the data is available.

See “PC and software specifications” on page 6-4 for more information about the

printer driver and the PC on which it runs.

The Datacard® Select™ Platinum™ Series photo ID printer uses Advanced Imaging

Technology™. Three features of the printer work together to provide the benefits of

Advanced Imaging Technology:

Print ribbon: Platinum Series print ribbon must be used in the Select Platinum Series

printer

Printer unit: The printer includes enhancements to provide optimal color printing.

Printer driver: The printer driver includes color settings. “Using the Printer Toolbox”

on page 3-10 provides more information about color settings.

Printer models

Several models of the printer are available. ImageCard printers can print full-color or

monochrome images, while UltraGrafix printers can print only monochrome images.

The printer label provides information about the options in your printer (see

Figure 1-2). The label also includes the printer serial number.

Figure 1-2: Printer label

Top cover

Printer label

1-4 Overview

User’s Guide for Select™ Platinum Series™ Printers

A printer can be ordered with the following optional modules:

• Duplex module. The duplex module extends the length of the printer and flips the

card to automatically print on both sides of the card. The printer label includes the

number “2” if the printer has a duplex module.

• Magnetic stripe module, for either 3-track (IAT) encoding or single-track NTT (J)

encoding. The module is installed in-line with the print operation. It encodes data

on the magnetic stripe and then verifies the data.

• Smart card module. The smart card module can have one of the following:

– Contact coupler (SC4xx on the printer label)

– Contactless (RF) coupler (SC680 on the printer label)

– Proximity coupler (SC-x, where x represents the brand of coupler)

– Both contact and contactless couplers (SC4/6 or SC4/SC-x on the printer

label)

– Contact station (SCCS on the printer label) with external coupler

A custom smart card application can use the module to initialize and program

the smart card chip on a card.

Table 1-1 lists the models and their features.

Monochrome printing uses a ribbon with a single color, such as black. To optimize

monochrome printing, use a monochrome printhead.

Table 1-1: Select printer features available

Model name Colors printed

Duplex

module

#

Magnetic

stripe

#

#. Optional

Smart

card

#

ImageCard

Select

Full color or monochrome

Yes

#

Yes

#

Yes

#

UltraGrafix

Select

Monochrome only

Yes

†

Yes

†

Yes

†

†. Only one of these options is available in a printer.

i

Overview 1-5

User’s Guide for Select™ Platinum Series™ Printers

Printer features

Use the information in this section to identify the features and controls you use on the

printer.

Figure 1-3: Front of the Select printer

Front of the printer

Find the following on the outside of the printer:

Duplex or smart card module

The optional duplex module flips the card to automatically print on both sides of the

card. If the printer includes an optional smart card module, it is located under the

duplex mechanism or in a duplex housing.

Top cover

The cover protects the internal parts of the printer from dust and debris. It also lessens

the sound from the printer.

Status light

The status light indicates that the printer power is on, is processing data, is ready to

receive data, or is in an error condition.

Card cartridge

The card cartridge holds blank cards to print. It holds about 100 cards (with a nominal

thickness of 0.030 inches (0.76 mm)). At the bottom of the card cartridge, the

exception card slot allows you to insert a single card that is different from the cards

in the card cartridge.

Status light

Card cartridge

Exception card slot

Card output stacker

Ready button

Top cover

Duplex and/or smart card

modules (optional)

Locks (optional)

1-6 Overview

User’s Guide for Select™ Platinum Series™ Printers

Card cartridge lock (optional)

The optional card cartridge lock allows you to lock the card cartridge into position,

preventing cards from being removed without authorization. Some printers have two

locks to meet the security requirements of the organization.

Card output stacker

The card output stacker holds the cards after they have been processed. Both

completed cards and rejected cards go to the card output stacker.

Ready button

The Ready button allows you to pause the printer while printing a card, to clear an

error condition, to cancel a print job and delete all data for the job, or to create a

printer test card.

Inside the printer

Open the cover to find the following on the inside of the printer.

Figure 1-4: Internal parts of the Select printer

Top cover

Printhead cartridge

Ribbon tracker

Print ribbon cartridge

Card advance knob

Continuous cleaning roller

(hidden in this view)

Swing arm

Printer label/serial number

Overview 1-7

User’s Guide for Select™ Platinum Series™ Printers

Swing arm

The swing arm opens to give you access to the print ribbon cartridge, continuous

cleaning roller, and printhead cartridge. Push down on the raised end of the swing arm

to unlatch it and then open it.

Ribbon tracker

The ribbon tracker measures the movement of the print ribbon as it moves from the

supply spool during printing.

Printhead cartridge

The printhead, contained in the printhead cartridge, applies heat and pressure, which

transfers dye and other material from the print ribbon to the card. The printhead

cartridge is operator-replaceable.

Printer label

The printer label includes the printer serial number and information about optional

components of the printer.

Print ribbon cartridge

The print ribbon cartridge holds the print ribbon.

Card advance knob

The card advance knob turns to move a card along the card transport track. If a card

remains in the printer, use this knob to move the card in the card track.

Continuous cleaning roller

The continuous cleaning roller includes a spindle and a replaceable cleaning sleeve.

The spindle holds the roller in place. The replaceable cleaning sleeve removes dirt

and debris from the permanent cleaning roller in the printer and should be changed

regularly. (Hidden in this view.)

1-8 Overview

User’s Guide for Select™ Platinum Series™ Printers

Back of the printer

Figure 1-5 shows the back of the Select printer:

Figure 1-5: The back of the Select printer

If the printer includes an optional duplex module, that module extends farther than the

ports and receptacles.

Find the following on the back of the printer:

Data Port

The printer includes two data ports. Select only one data port to use.

• ECP parallel port

Use the ECP parallel port to connect the printer's data cable to the PC, if the

printer was ordered with a parallel cable.

• USB data port

Use the USB data port to connect the printer's data cable to the PC, if the printer

was ordered with a USB cable.

Power switch

Use the Power switch to power on or power off the printer.

Power receptacle

This is the receptacle for connecting the power cable.

Power receptacle

ECP parallel data port

Contact smart card port*

Contactless smart card port*

USB data port

Power switch

Contactless smart card port*

*Optional

Overview 1-9

User’s Guide for Select™ Platinum Series™ Printers

Smart card port(s)

On printers equipped with the smart card option, use one or more of these connectors

for the cable from the PC or contact station that carries the data to encode on the

smart card chip. If the printer does not have any smart card options, the ports will not

be installed in the printer.

Who to call for assistance

If you work with a Datacard-authorized dealer, distributor, or value-added reseller,

contact them for assistance. A value-added reseller provides the Select printer as part

of an overall system.

If any contents of the box are missing, contact your Datacard-authorized dealer,

distributor or reseller. If you purchased your printer directly from Datacard, contact

Datacard. Contact the Datacard Customer Care Center at 1.800.328.3996 for

service in the United Stated and Canada. For worldwide service, call the Datacard

Customer Care Center directly at 952.988.2316. Make sure you have the serial

number, located inside the printer, when you call (see Figure 1-2 ).

i

1-10 Overview

User’s Guide for Select™ Platinum Series™ Printers

2

Using the printer

This section describes how to perform basic tasks required to

operate the Datacard® Select™ Platinum™ Series photo ID

printer. It describes:

• Tips for success

• Loading cards

• Loading print ribbon

• Powering on the printer and PC

• The ready button and status light on the printer

• Making cards

• Removing cards

• Responding to messages

• Powering off the printer and PC

Begin with the printer set up and the printer driver installed. If the printer is not set up,

see “Before you install” on page 6-1 and “Install the printer” on page 7-1 to set up the

printer and install the driver.

2-2 Using the printer

User’s Guide for Select™ Platinum Series™ Printers

Tips for success

To achieve the best quality cards and to maintain optimum performance of your

printer, follow these tips for success:

• Use the best quality cards available. Good quality cards have a smooth, glossy

PVC surface (with no debris embedded in the surface), a mylar signature panel

(optional), a flush magnetic stripe (optional), are not pre-punched, and are printed

only once.

• Match the card design, the supplies you use, and the printer to obtain the results

you want.

– Edge-to-edge printing requires high-quality cards and can require fine-tuning

the printer and the card design.

– Do not place an important image, such as a photo, on the front of the card in

the same area as a magnetic stripe. Frequent use of a card in a magnetic

stripe reader can wear away the image on the opposite side of the card.

– Locate bar codes at least 0.25 inch (6.3 mm) from other printing and from the

edge of the card. Make sure the color used to print the bar code works in your

bar code readers. (Infrared readers require that the K panel be used to print

the bar code.)

– Do not print closer than 0.1 inch (2.5 mm) from a signature panel, magnetic

stripe, or smart card chip.

– Avoid placing a photo directly on the other side of a signature panel. Residue

from the panel can cause printing problems on an adjacent card.

– Avoid placing a photo or other critical information directly on the other side of

a smart card chip. The card might not be as flat in that area and printing voids

can occur.

– Do not apply topcoat over a magnetic stripe or over a smart card chip.

• Follow instructions carefully when replacing supplies, correcting problems,

cleaning the printer, and replacing parts.

• Use the correct cables, connect them correctly, and keep them out of the way.

• Keep a stock of supplies on hand and store them safely. See “Supplies and cards”

on page B-1.

• Keep the printer clean and keep the area around the printer clean.

Using the printer 2-3

User’s Guide for Select™ Platinum Series™ Printers

Loading cards

Load cards when beginning work or when the card cartridge is low on cards or empty.

You can load cards when the printer power is on or off. You can also load cards while

the printer is printing.

To order more cards, contact your card vendor. For information on card requirements,

see “Supplies and cards” on page B-1.

Load cards

If the printer has a locking card cartridge, unlock the cartridge before removing it.

1 Pull up on the lower edge of the card cartridge (step 1 in Figure 2-1). Lift the card

cartridge up and out of the printer (step 2 in Figure 2-1).

Figure 2-1: Remove the card cartridge

Do not touch the surface of cards before printing them. Oils on hands can cause

discolored printing. Handle cards by the edges or wear gloves to protect cards.

2 Fan cards to separate the edges of the cards (see Figure 2-2).

Figure 2-2: Fan cards

3 Place up to 100 blank cards into the card cartridge. (If cards are thicker or thinner

than 0.030 inch (0.76 mm), the maximum number of cards you can load varies.)

i

2

1

i

2-4 Using the printer

User’s Guide for Select™ Platinum Series™ Printers

For magnetic stripe cards, the magnetic stripe faces down and is positioned

toward the side of the printer that opens (see Figure 2-3). (For some custom

applications, you might receive instructions to place cards in a different

orientation.)

For smart cards, position the card so the chip is up and toward the open end of

the card cartridge.

Figure 2-3: Load cards into the card cartridge

Do not run the printer for an extended time without cards in the card cartridge.

Load more cards as soon as you are prompted.

4 Replace the card cartridge in the cavity (step 1 in Figure 2-4). Push the bottom of

the card cartridge toward the printer until it clicks into place (step 2 in Figure 2-4).

Figure 2-4: Replacing the card cartridge

If the printer has a locking card cartridge, lock the cartridge after replacing it.

♦

Magnetic Stripe

Smart Card Chip

i

1

2

i

Page is loading ...

DataCard UltraGrafix Select User manual

This manual is also suitable for

DataCard UltraGrafix Select User manual

Related papers

Other documents