FUFU GAGA LJY-KF390006-01 is a versatile piece of furniture that combines ample storage space with a stylish design. It features multiple drawers and shelves, providing room for various items, from clothes and accessories to books and decorative pieces. The sturdy construction and high-quality materials ensure durability and longevity. Assembly requires basic tools and is facilitated by detailed instructions and labeled parts. With its functional design and elegant appearance, FUFU GAGA LJY-KF390006-01 is a practical and visually appealing addition to any room.
FUFU GAGA LJY-KF390006-01 is a versatile piece of furniture that combines ample storage space with a stylish design. It features multiple drawers and shelves, providing room for various items, from clothes and accessories to books and decorative pieces. The sturdy construction and high-quality materials ensure durability and longevity. Assembly requires basic tools and is facilitated by detailed instructions and labeled parts. With its functional design and elegant appearance, FUFU GAGA LJY-KF390006-01 is a practical and visually appealing addition to any room.
Version:08/13/2022 1/14
Sideboard
please read the entire manual before starting to assemble
and/or using this product.follow the manual thoroughly and
keep it for further reference.
IMPORTANT INFORMATION!
It is important that any product which is assembled using any kind of screw is re-tightened
2 weeks after assembly,and once every 3 months - in order to assure stability through-out
the lifespan of the product.
For regular maintenance and cleaning of the product, for the frame, please use a rag dipped
in neutral detergent to fully wipe it, and then dry it with a clean rag.For glass materials, wipe
with a rag dampened with water glass cleaner, and then dry with a dry rag.
Do not use an electric screwdriver, and do not use too much force when installing, because
the board is easy to break.
IMPORTANT !
Overturned furniture can cause serious or fatal crush injuries. To prevent tipping over, be sure
to use the wall attachment, if not included with this product. Please purchase the wall
attachment that fit your wall. If unsure, seek professional advice. Please read and follow each
step of the instructions carefully.
ANTI-TOPPLE WARNING !
Try to find a partner to install
with you, which can speed up
the installation efficiency and
shorten the time.
IMPROVE EFFICIENCY !
In order to avoid scratching this
furnuture should be assembled
on a soft layer-could be a rug.
AVOID SCRATCHES!
2/14
A x 50 B x 72 C x 50 D x 4
F x 16 H x 4
J x 4
G x 4
15 x 12 mm
6 x 35 mm
4 x mm
6 x 30 mm
3 x 12 mm
4 x
30 mm
L x 4M x 8
K x 4
E x 6
When installing, please carefully confirm whether
each screw corresponds to the manual, accessories
with similar shapes can be distinguished by size
Please prepare the following tools
3/14
N x 4O x 16
25
6 x 25 mm
4/14
11 PC 2 1 PC 3 2 PC
4 1 PC
8 4 PCS
18 2 PCS
9 1 PCS
19 2 PCS 20 2 PCS 21 2 PCS 23 1 PC
22 1 PC
10 1 PC 11 2PC
12 2 PCS 14 4PCS 15 4PCS 16 4PCS 17 4PCS13 2PCS
5 1 PC 6 1 PC 7 2PC
5/14
14
15
16
18
17
x2
14
15
16
19
17
x2
1
6
4
5
7
7
3
3
8
8
8
8
2
11
11
12
13
12
13
23
20
21 21
20
22
1
6/174
x2
x2
1
x2
x2
x2
x2
x2
x2
20
20
21
21
20
20
21
21
22
22
23
23
E
E
O
O
O
O
O
O
O
O
O
E
E
E
E
E
E x 6
4 x 30 mm
O x 16
6 x 25 mm
Connect No.22 and 23 part with
No.20 and 21 steel tube using
screw(O) as shown.
Attach the component
to No.1 plate with
screw(E) as shown.
2
3 x 12 mm
B x 24 G x 4 H x 4 A x 34
7/14
4 6
55
G
BB B
H
BBB
1
2
BB
B
BB
B
A
A
A
A
A
A
A
A
A
AA
A
A
A
A
AA
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
BB
B
BB
B
3
7
x2
x2
9
10
6 x 35 mm
Insert quickfit screw(A)
into corresponding holes
in No.1,2,3,7,4,6,5
plates with a screwdriver
as shown.
Fix slide rail(G) to No.4,No.5
and No.9; slide rail(H) to No.6,
No.10 and another side of No.5
with screw(B) as shown.
3
8/14
15 x 12 mm
C x 15 D x 4
1
1
6
4
5
7
7
3
3
6
5
73
4
7
3
8
8
8
8
C
CC
C
C
C
C
C
C
C
C
C
C
C
C
C
C
Insert wooden dowel(D) into
No.3 plate at first.
Connect No.4 and No.5
plate with No.3, turn
cam lock(C) clockwise to
tighten as shown.
Connect No.5 and No.6
plate with No.3, turn
cam lock(C) clockwise to
tighten as shown.
Attach No.7 plate
to No.1, turn cam
lock(C) clockwise
to tighten as
shown.
Slide No.8 plate into
available slots as
shown.
4
9/14
15 x 12 mm
C x 19
2
9
2
10
11
11
11
11
M
M
M
MM
M
M
M
M
8
C
CC
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
4
5
6
C
Attach No.9 and No.10 plate to No.3,7, turn
cam lock(C) clockwise to tighten as shown.
Insert part(M) into No.4,9,5,10,6 and put
No.11 shelf in as shown.
Attach No.9 and No.10 plate to
No.3,7, turn cam lock(C)
clockwise to tighten as shown.
Cover No.2 plate and
turn cam lock(C)
clockwise to tighten.
5
10/14
26 mm
x 4
3 x 12 mm
B L
L
L
L
L
26 mm
x 4
N
N
N
N
x 24
12
13
12
13
12
13
12
13
Please don't use an
electric screwdriver or
use force to rotate,
may cause crack.
Fix hinge(L) to No.12 and
No.13 plate with
screw(B) as shown.
Fix hinge(N) to another
No.12 and No.13 plate
with screw(B) as shown.
Attach No.12 and No.13 plate to
corresponding No.4 and No.6
plate by fixing hinge(N) with
screw(B) as shown.
Attach another No.12 and No.13 plate
to No.5 plate by fixing hinge(L) with
screw(B) as shown.
6
11/14
If there is misalignment after you install,
adjust the screw to the best condition
12/14
x2
6 x 35 mm
A x 8
73 x 12 mm 4 x 25 mm
F x 8 K x 2J x 2
B x 12
15 x 12 mm
C x 8
AA
AAC
C
B
J
B
B
B
B
C
F
F
F
F
C
14
14
17
14
16
19
19
15
Attach No.14,15 to No.16
with screw(F) as shown.
Slide No.17 into available
slots as shown.
Insert quickfit screw(A) into No.19
plate with a screwdriver as shown.
Fix runner(J) and (K) to
No.14 and No.15 with
K
Attach No.19 plate to the
component and turn cam
lock(C) clockwise to
tighten as shown.
screw(B) as shown.
A
F
F
C
C
13/14
x2
6 x 35 mm
A x 8
83 x 12 mm 4 x 30 mm
F x 8 K x 2J x 2
B x 12
15 x 12 mm
C x 8
AA
AAC
C
C
F
F
F
F
C
14
14
17
15
16
10
18
15
18
J
B
B
B
B
B
B
Attach No.14,15 to No.16 with
screw(F) as shown.
Slide No.17 into available slots
as shown.
Insert quickfit screw(A)
into No.18 plate with a
screwdriver as shown.
K
Attach No.18 plate to
the component and
turn cam lock(C)
clockwise to tighten
as shown.
Fix runner(J) and (K)
to No.14 and No.15
with screw(B) as
shown.
A
F
F
C
C
9
10
14/14
Align rails, slide all drawers.
WARRANTY CLAIMS
•There is a 30-day warranty for broken furniture or any other problems that do not
work properly. The warranty will start from the date of purchase which must be
verified by proof of purchase.
•Before making a claim, we may be able to answer your query, simply call us. Please
leave your purchase order number, along with some details of the problem, if you
want a replacement part. We will arrange within 48 hours. If there is out of stock,
we will reply with a shipping date.
•The product must be used in accordance with the instructions provided. For health
reasons.
•For other reasons, if the furniture needs to be returned, it must be cleaned and dried
and operated within 30 days of receipt.
Type of Warranty Claim
•Failure to follow the furniture instructions will invalidate the warranty. Attention please.
•Does not include damage during installation, but includes damage during transportation.
Scope of responsibility
•Shall not bear any responsibility for misuse or user damage and / or loss of parts during
the installation of furniture.
•After using, the damage and scratches of the furniture are not covered by the warranty.
The Warranty Relates to All Bought in The Us and Covers The
Following Areas
•Sheet parts: 1 month from the date of purchase.
•Electrical parts: 1 month from the date of purchase.
WARRANTY
CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM?
PLEASE FOLLOW THE BELOW INSTRUCTIONS:
•If you have purchased and have simply changed your mind, follow the retailer’s
instructions for returns.
DEFECTIVE ITEMS
•If your item is defective in any way, i.e. it doesn’t work but you can’t identify why, in
the first instance, please call us.
DAMAGED ITEMS
•If you receive an order with obvious shipping damage from the retailer, then we suggest
the delivery is refused. If the delivery has been accepted and then shipping damage is
found, please follow the specific instructions advised by the retailer.
In all circumstances please save all packaging material and paperwork for the order.
Please be aware that if you dispose of packaging material or attempt to return the
merchandise without contacting the fulfiller, you jeopardise your chances of making a
claim, and you may not receive a credit for the return.
RETURNS
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
FUFU GAGA LJY-KF390006-01 is a versatile piece of furniture that combines ample storage space with a stylish design. It features multiple drawers and shelves, providing room for various items, from clothes and accessories to books and decorative pieces. The sturdy construction and high-quality materials ensure durability and longevity. Assembly requires basic tools and is facilitated by detailed instructions and labeled parts. With its functional design and elegant appearance, FUFU GAGA LJY-KF390006-01 is a practical and visually appealing addition to any room.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
FUFU GAGA LJY-KF390007-01 User manual
-
FUFU GAGA 55 Inch Wide Dining User manual
-
FUFU GAGA KF250022-0123 User manual
-
FUFU GAGA J-KF250022-01 User manual
-
FUFU GAGA LJY-KF020282-01 User manual
-
-
FUFU GAGA TCHT-WFKF210050-01 User manual
-
FUFU GAGA KF200050-01-ddd User manual
-
FUFU GAGA KF200051 User manual
-
Other documents
-
Kmart 43235148 User manual
-
-
Kmart 43191062 User manual
-
-
FUFU&GAGA KF250022-0123 Installation guide
-
-
ELECRAFT KX2 A User manual
-
-
-