FUFU&GAGA KF200181-01 Operating instructions

FUFU&GAGA
Brand
FUFU&GAGA
Model
KF200181-01
Type
Operating instructions

This manual is also suitable for

Cupboard
Version:08/17/2022 1/19
2/19
please read the entire manual before starting to assemble
and/or using this product.follow the manual thoroughly and
keep it for further reference.
IMPORTANT INFORMATION!
It is important that any product which is assembled using any kind of screw is re-tightened
2 weeks after assembly,and once every 3 months - in order to assure stability through-out
the lifespan of the product.
For regular maintenance and cleaning of the product, for the frame, please use a rag dipped
in neutral detergent to fully wipe it, and then dry it with a clean rag.For glass materials, wipe
with a rag dampened with water glass cleaner, and then dry with a dry rag.
Do not use an electric screwdriver, and do not use too much force when installing, because
the board is easy to break.
IMPORTANT !
Overturned furniture can cause serious or fatal crush injuries. To prevent tipping over, be sure
to use the wall attachment, if not included with this product. Please purchase the wall
attachment that fit your wall. If unsure, seek professional advice. Please read and follow each
step of the instructions carefully.
ANTI-TOPPLE WARNING !
Try to find a partner to install
with you, which can speed up
the installation efficiency and
shorten the time.
IMPROVE EFFICIENCY !
In order to avoid scratching this
furnuture should be assembled
on a soft layer-could be a rug.
AVOID SCRATCHES!
When installing, please carefully confirm whether
each screw corresponds to the manual, accessories
with similar shapes can be distinguished by size
Please prepare the following tools
3/19
3 x 12 mm
15 x 9 mm
C x 12
6 x 35 mm 4 x 35 mm
6 x 30 mm
D x 16 E x 15
F x 6 CR x 2 CL x 2 DR x 2
DL x 2
G x 6 J x 4 L x 32
M x 1 P x 1
4 x 14 mm
H x 6 K x 8
N x 1
300mm 300mm 300mm
300mm
A x 34 B x 34
4 x 14 mm
4 x 18 mm
O x 36
8 x 30 mm
3 x 10 mm
Q x 2
8 x 50 mm
4/19
16
17
20
19
21
18
11
1
2
3
4
5
6
7
8
9
10 13
12
15
14
22 11
1
5/19
2
IIIIII
6 x 35 mm
A x 8
B x 2
15 x 9 mm
B
B
A
A
A
8
8
2
3
B
A
A
A
A
A
A
1
Insert quickfit screw(A) into No.1 and No.8 plates
with a screwdriver as shown.
Please don't use an electric screwdriver or use
force to rotate, may cause
crack.
Attach No.8 plate to No.2 and No.3 and turn
cam locks(B) clockwise to tighten as shown.
180°
4
6/19
3
B x 6
15 x 9 mm
E x 4
4 x 35 mm
B
B
B
B
B
B
2
3
4
1
B
J
J
J
J
E
E
E
E
IIIIII
2
3
4
J x 4
8 x 50 mm
J
J
E
E
4
C x 4
8 x 30 mm
C
C
CC
C
Attach No.4 plate to No.2 and No.3 with
long wooden dowel(J) and fix with
screw(E) as shown.
Cover No.1 plate to the top with wooden
dowel(C) and turn cam locks(B) clockwise
to tighten as shown.
180°
5
7/19
6
6 x 35 mm
A x 4
A
A
A
A
24
A
D
DD
CL
CL D
A
5
A
D x 4
3 x 12 mm
CL x 2
6 x 35 mm
A x 4
D
CL
A
A
A
Insert quickfit screw(A) into corresponding holes
in No.4 plates as shown.
Insert quickfit screw(A) into corresponding holes
in No.5 plate at first.
Fix slide rail(CL) to No.5 plate with screw(D) as
shown.
7
8/19
8
CR
CR
E
E
E
E
A
A
6
D x 4
3 x 12 mm
CR x 2
6 x 35 mm
A x 4
A
D
CR
B
B
C
IIIIII
B
C
C x 2
8 x 30 mm
B x 2
15 x 9 mm
5
12
A
A
C
Insert quickfit screw(A) into corresponding holes
in No.6 plate at first.
Fix slide rail(CR) to No.6 plate with screw(D) as
shown.
Please pay attention to the holes where the accessories are inserted.
Attach No.12 plate to No.5
with wooden dowel(C) and
turn cam locks(B)
clockwise to tighten as
shown.
180°
9
9/19
10
B
B
C
C
IIIIII
C x 2
8 x 30 mm
B x 2
15 x 9 mm
5
12
13 10
A
A
A
A
A
6 x 35 mm
A x 4
9
B
C
Insert quickfit screw(A) into No.9 plate with
Attach No.10,13 plate to No.5 with wooden
dowel(C) and turn cam locks(B) clockwise to
tighten as shown.
a screwdriver as shown.
180°
12
10/19
B x 4
15 x 9 mm
B
B
B
B
B
IIIIII
69
13
13
9
B
BB
B
5
12
13
10
6
C x 4
8 x 30 mm
B x 4
15 x 9 mm
IIIIII
B
C
11
C
C
C
C
Attach No.6 plate to No.10,12,13 with wooden
dowel(C) and turn cam locks(B) clockwise to
tighten as shown.
Attach No.9 plate
to No.13 and turn
cam locks(B) clockwise
to tighten as shown.
180°
180°
13
11/19
14
IIIIII
B x 4
15 x 9 mm
3 x10 mm
L x 32
B
B
B
B
L
LLL
LL
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
LL
L
LL
L
L
L
24
6
5
L
L
14
15
L
L
B
Connect the two assembled unit and turn cam
locks(B) clockwise to tighten as shown.
Fix No.14,15 back plates with screw(L) as shown.
15
12/19
K x 8
OR
OR
K
K
K
11
11
2
5
K
K
K
K
K
K
K
K
Insert part(K) into side plates and
put No.11 shelf in as shown.
13/19
16
F x 2
4 x 18 mm
H x 6
4 x 14 mm
O x 12
O
O
O
F
H
H
O
O
H
G
H
O
O
G x 2
F
G
O
OO
OO
OO
G
F
H
H
H
7
22
Please don't use an electric screwdriver or
use force to rotate, may cause crack.
Fix hinge(H) to No.7 and No.22 plate with
screw(O) as shown.
Fix knob(G) with screw(F) as shown.
17
14/19
4 x 14 mm
O x 24
O
H
O
22
7
O
O
O
O
O
Please don't use an electric screwdriver or use
force to rotate, may cause crack.
Attach No.22 and No.7 door to side plates by
fixing hinge with screw(O) as shown.
18
15/19
E x 10
4 x 35 mm
19
E
E
E
E
E
21
17
20
16
16
18
E
21
17
x2
x2
Attach No.16,18,21 plates to No.17 with screw(E) as shown.
Slide No.20 plate into available slots as shown.
20
21
A x 10
15 x 9 mm
F
G
A
A
A
A
A
F
G
F x 4
4 x 18 mm
G x 4
x2
B x 10
15 x 9 mm
16/19
IIIIII
x2
F
G
A
19
19
B
B
B
B
B
BB
16
19
16
19
Insert quickfit screw(A) into No.19 plate
with a screwdriver as shown.
Attach No.19 to the component and
turn cam locks(B) clockwise to tighten
as shown.
Fix knob(G) with screw(F) as
shown.
17/19
22
D x 8 DR x 2 DL x 2
3 x 12 mm
D
D
D
D
DR
DL
D
DL
x2
18
Fix runner(DL) and (DR) to No.18 and No.16
plate respectively with screw(D) as shown.
23
18/19
E x 1 N x 11
4 x 35 mm 4 x 14 mm
M x 1 P x 1
6 x 30 mm
Q x 2
Q
M
P
E
Q
N
M
N
P
Q
ME
Q
Install anti-tipping device
to stabilize the item.
24
19/19
If there is misalignment after you install,
adjust the screw to the best condition
WARRANTY CLAIMS
•There is a 30-day warranty for broken furniture or any other problems that do not
work properly. The warranty will start from the date of purchase which must be
verified by proof of purchase.
•Before making a claim, we may be able to answer your query, simply call us. Please
leave your purchase order number, along with some details of the problem, if you
want a replacement part. We will arrange within 48 hours. If there is out of stock,
we will reply with a shipping date.
•The product must be used in accordance with the instructions provided. For health
reasons.
•For other reasons, if the furniture needs to be returned, it must be cleaned and dried
and operated within 30 days of receipt.
Type of Warranty Claim
•Failure to follow the furniture instructions will invalidate the warranty. Attention please.
•Does not include damage during installation, but includes damage during transportation.
Scope of responsibility
•Shall not bear any responsibility for misuse or user damage and / or loss of parts during
the installation of furniture.
•After using, the damage and scratches of the furniture are not covered by the warranty.
The Warranty Relates to All Bought in The Us and Covers The
Following Areas
•Sheet parts: 1 month from the date of purchase.
•Electrical parts: 1 month from the date of purchase.
WARRANTY
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21

FUFU&GAGA KF200181-01 Operating instructions

FUFU&GAGA
Brand
FUFU&GAGA
Model
KF200181-01
Type
Operating instructions
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents