VideoPhoto
Hardware connection
Modify network settings of computer
Login website for managing DDS
HUB
Laptop
Manuals
DDS Installation Guide
Prepare a USB which memory capacity is more than 4GB
Insert USB into USB terminal of DDS
You will see “reading out” and “loading” on monitor first.
It will complete in 25 secs.
Take USB out of DDS
Insert USB into computer. There are four folders.
Open “defaultText.txt” in main folder by Notepad.
Edit words for marquee. One sentence for one line.
Insert USB into USB terminal of DDS again.
File system of USB must be FAT32, if not, please format it to FAT32.
1
2
1
2
3
3
4
5
6
7
main sub_up sub_down banner
Diagram
Diagram
By USB
By Internet
Insert network cable and power into LAN and DC of DDS
(1)
(2)
(3)
(1)
(2)
Connect to HUB
Make sure PC or laptop is connecting with HUB
Use browser Internet Explorer or Google Chrome
(1)
(2)
(3)
Connect to http://192.168.1.51:8080
Enter account and password
Control panel network and internet network and sharing center modify interface settings
Ethernet, select content by clicking right button of mouse
select internet communication protocol fourth version (TCP/IPv4)
Set the settings as following. IP: 192.168.1.50; default gateway server: 192.168.1.1
I D admin
PWD admin
Website default
banner
main
defaultText
sub_up
sub_down
Monitor
DDS
ADD http://192.168.1.51:8080
DDS
EN
Manualshttps://manual.blueeyes.com.tw
Contact us +886 4 22970977 ext. 335,336,306 21.11
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Numark DDS80 User manual
-
Shure DDS5900 User guide
-
-
RuggedCom RuggedRouter RX1100 User manual
-
Dell PowerVault DL2100 User guide
-
-
ADTRAN Total Access 1500 Installation and Maintenance
-
-
-