2. Metz
  3. 32MTC6100Y
32MTC6100Y

Metz 32MTC6100Y User manual

  • I have reviewed the disassembly instructions for the METZ 32MTC6100Y TV. The document outlines the necessary steps for safely disassembling the device, including removing the rear panel and the printed circuit boards, while noting the potential for residual electrical charges in capacitors. I'm here to help answer any questions you may have about this process.
  • What tool is required for disassembly?
    What is the first step in disassembling the device?
    Is there any safety concern during disassembly?
Metz Consumer Electronics GmbH
Ohmstrasse 55 - 90513 Zirndorf
Tel. (0911) 9706-0 - [email protected]
Demontageanleitung
Disassembly instructions
Metz 32MTC6100Y
Technische Änderungen und Irrtümer vorbehalten!
Technical changes and errors excepted! U2199_40325_00
Notwendige Werkzeuge:
Nessesary tools:
Schraubendreher PH2
Screw driver PH2
1 Demontage der Rückwand
a) Schrauben mit einem
Schraubendreher PH2 entfernen.
b) Laschen leicht aufbiegen und
Rückwand gleichzeitig anheben.
1 Disassembly the rear panel
a) Remove screws with a screw driver
PH2.
b) Slightly bend open the tabs and lift
the rear wall at the same time.
2 Demontage der Leiterplatten
Elkos können Restladung
enthalten.
Elkos may contain residual
charges.
Schrauben mit einem Schraubendreher
PH2 entfernen.
2 Disassembly of the printed
circuit boards
Remove screws with a screw driver
PH2.
PH2
PH2
PH2
/