2. Computers & electronics
  3. TVs & monitors
  4. Wall & ceiling mounts accessories
  5. Lavex
  6. Plastic Laminate Tabletop Worktable

Lavex Plastic Laminate Tabletop Worktable Installation guide

  • Hello! I've reviewed the installation instructions for the LAVEX Plastic Laminate Tabletop worktable. This document details the assembly process, including how to attach the adjusting feet, lateral bracing, and the tabletop. I am ready to answer your questions about this product and the assembly procedure.
  • What is used to secure the adjusting feet?
    How many screws are used to attach lateral channel bracing?
    How many hexagon flange head tapping screws are used to secure the tabletop?
PARTS
ASSEMBLY
A
STEP 1 STEP 2
E
B
F
C
G
D
H
(4) Adjusting Feet
Insert one of the adjusting feet (A) into a step rivet
of one of the leg frames (B). Choose your desired
height and use a nylon rivet (C) to secure the foot.
Repeat Step 1 to install all four adjusting feet.
(8) Screws
(2) Leg Frames
(8) Nylon Lock Nuts
(4) Nylon Rivets
(1) Laminate Tabletop
(1) Lateral Channel Bracing
(8) Hexagon Flange Head
Tapping Screws
INSTALLATION INSTRUCTIONS
PLASTIC LAMINATE TABLETOP WORKTABLE
A
B
C
STEP 3 STEP 4
STEP 5 INSTALLATION FINISHED
Secure the lateral channel bracing (D) to the leg frames
using the screws (E) and nylon lock nuts (F) provided.
Place the tabletop (G) upside down on a
surface that won’t scratch it.
Secure the tabletop to the leg
frames using the hexagon flange
head tapping screws (H).
INSTALLATION INSTRUCTIONS
PLASTIC LAMINATE TABLETOP WORKTABLE
E
D
F
G
H
/