2. Computers & electronics
  3. TVs & monitors
  4. Wall & ceiling mounts accessories
  5. LAVEX INDUSTRIAL
  6. 257WB3048W

LAVEX INDUSTRIAL 257WB3048W User manual

  • Hello! I have reviewed the installation instructions for the Wooden Tabletop worktable. This document provides detailed steps and diagrams for assembling the worktable, including attaching the adjustable feet, securing the lateral channel bracing, and mounting the wooden tabletop. I am ready to answer any questions you have about the assembly process or the components of the worktable.
  • What's included in the parts list?
    How are the adjusting feet installed?
    How is the lateral channel bracing secured?
    How is the tabletop secured to the leg frames?
PARTS
ASSEMBLY
A
STEP 1 STEP 2
E
B
F
C
G
D
H
(4) Adjusting Feet
Insert one of the adjusting feet (A) into a step rivet
of one of the leg frames (B). Choose your desired
height and use a nylon rivet (C) to secure the foot.
Repeat Step 1 to install all four adjusting feet.
(8) Screws
(2) Leg Frames
(8) Nylon Lock Nuts
(4) Nylon Rivets
(1) Wooden Tabletop
(1) Lateral Channel Bracing
(8) Hexagon Flange Head
Tapping Screws
INSTALLATION INSTRUCTIONS
WOODEN TABLETOP WORKTABLE
A
B
C
STEP 3
STEP 5
STEP 4
STEP 6 INSTALLATION FINISHED
Secure the lateral channel bracing (D) to the leg frames
using the screws (E) and nylon lock nuts (F) provided.
To prevent wood splitting, place tape on drill
bit ¾" from the end of the bit, and drill pilot
holes ¾" deep with the provided drill bit.
Place the tabletop (G) upside down on a
surface that won’t scratch it.
Secure the tabletop to the leg
frames using the hexagon flange
head tapping screws (H).
INSTALLATION INSTRUCTIONS
WOODEN TABLETOP WORKTABLE
E
D
F
H
G
⁄"
⁄"
/