Appleton ST-90400 User manual

NEC/CEC:

Listed for Ordinary Locations

Liquidtight Flexible Nonmetallic Conduit Connectors

Featuring “Floating Sleeve” Design.

Assembly Instructions

1.Slidecompressionnutwithcaptive

floatingsleeveoverendofTypeAconduit

(exposingaboutoneinchofconduit).

Sleeveself-alignstocompensatefor

minorconduitsurfaceirregularitiesor

non-uniformconduitwallthickness.Nut

movesfreelyoversleeve,whichdoesn’t

rotate.Nutcan’tbind...conduitcan’ttwist

duringassemblyordisassembly.

2.Useconnectorbodyas“wrench”to

threadruggednylonferruleintoinnerwall

ofconduit.(Theoctagonalheadofthe

ferrulematespreciselywiththematching

octagonalrecessintheconnectorbody.)

Theferrulethreadsbitedeeplyintothe

conduitwallforapositiveseal.Provides

superiorpull-outresistance.

3.Wrench-tightenuntilnutcontacts

shoulderonbodytocompleteassembly.

Thistightlycompressesconduitbetween

sleeveandferruleforapositiveliquidtight

seal.Whentightened,floatingsleeve

extendsbeyondcompressionnutto

protectconnectionfromstrainofflexing.

Illustrated Dimensions

1. Floatingsleeveself-alignstominorconduitvariationsand

protectssealfromconduitflexing.

2. Nylonferrule’sdeep-bitingthreadspreventpull-out.

3. Compressionnutsqueezesconduittightlybetweensleeve

andferrule.

4. Connectorbodypreventsconduitfromtwistingand

binding.

5. Locknutbitesinforvibration-proofconnection.

6. Insulatedthroatprotectsconductorinsulation.

7. “O”ringformstightsealtometalsurfaces.

COMMERCIAL AND INDUSTRIAL FITTINGS: LIQUIDTIGHT CONDUIT FITTINGS

Visit our website at www.appleton.emerson.com or contact us at (800) 621-1506.

281