Dometic Heki 2 Assembly Instructions

Page is loading ...

2

C

B

C

D

B

C

1

2

D

A

B

c

e

f

b

d0

g

a

4445101892 L 09/2019 MO1105I02B

Heki2-de-Luxe--IO-16s.book Seite 2 Dienstag, 19. Dezember 2017 10:23 10

YOUR LOCAL DEALER

dometic.com/dealer

A complete list of Dometic companies, which comprise the Dometic Group, can be found in the public filings of:

DOMETIC GROUP AB Hemvärnsgatan 15 SE-17154 Solna Sweden

YOUR LOCAL SUPPORT

dometic.com/contact

YOUR LOCAL SALES OFFICE

dometic.com/sales-offices

Heki2 de Luxe

Roof light

Installation and Operating Manual. . . . . . . . 3

Dachfenster

Montage- und Bedienungsanleitung . . . . . 13

Dôme de toit

Instructions de montage

et de service . . . . . . . . . . . . . . . . . . . . . . . . .24

Claraboya

Instrucciones de montaje y de uso . . . . . . .35

Clarabóia

Instruções de montagem e manual de

instruções . . . . . . . . . . . . . . . . . . . . . . . . . . .46

Oblò

Istruzioni di montaggio e d’uso . . . . . . . . .57

Dakraam

Montagehandleiding en

gebruiksaanwijzing . . . . . . . . . . . . . . . . . . .68

Ta gvindue

Monterings- og betjeningsvejledning . . . .79

Ta kf ön st er

Monterings- och bruksanvisning . . . . . . . .89

Ta kvind u

Monterings- og bruksanvisning. . . . . . . . . 99

Kattoikkuna

Asennus- ja käyttöohje . . . . . . . . . . . . . . . 109

Окно для крыши

Инструкция по монтажу и эксплуатации 119

Okno dachowe

Instrukcja montażu i obsługi. . . . . . . . . . . 131

Strešné okno

Návod na montáž a uvedenie

do prevádzky. . . . . . . . . . . . . . . . . . . . . . . 142

Střešní okno

Návod k montáži a obsluze . . . . . . . . . . . 153

Tetőa bl ak

Szerelési és használati útmutató . . . . . . . 164

EN

DE

FR

ES

PT

IT

NL

DA

SV

NO

FI

RU

PL

SK

CS

HU

WINDOWS & DOORS

HEKI

Heki2-de-Luxe--IO-16s.book Seite 1 Freitag, 2. Februar 2018 3:45 15

Page is loading ...

EN

Heki2 de Luxe Explanation of symbols

3

Please read this instruction manual carefully before installation and first

use, and store it in a safe place. If you pass on the product to another

person, hand over this instruction manual along with it.

Table of contents

1 Explanation of symbols. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

2 Safety and installation instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

3 Scope of delivery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

4 Optional extras . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

5 Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

6 Instructions before installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

7 Installing the Heki2 de Luxe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

8 Using the Heki2 de Luxe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

9 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

10 Maintaining and cleaning the Heki2 de Luxe . . . . . . . . . . . . . . . . . . . . . . . .12

11 Guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

12 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

1 Explanation of symbols

!

A

I

WARNING!

Safety instruction: Failure to observe this instruction can cause fatal or

serious injury.

NOTICE!

Failure to observe this instruction can cause material damage and impair

the function of the product.

NOTE

Supplementary information for operating the product.

Heki2-de-Luxe--IO-16s.book Seite 3 Freitag, 2. Februar 2018 3:45 15

EN

Safety and installation instructions Heki2 de Luxe

4

2 Safety and installation instructions

Please observe the prescribed safety instructions and stipulations from the

vehicle manufacturer and service workshops.

The manufacturer accepts no liability for damage in the following cases:

• Damage to the product resulting from mechanical influences and excess voltage

• Alterations to the product without express permission from the manufacturer

• Use for purposes other than those described in the operating manual

!

I

Please note the following:

• If faults or disturbances occur, consult a specialist workshop immediately.

• Risk of breakage! Do not tread on the glass dome.

• Before starting your journey, check that the roof window is locked properly.

• Before starting your journey, check the roof window for damage (such as tension

cracks in the acrylic glass).

• Do not open the roof window while driving.

• Do not open the window in strong wind or rain.

• Close the roof window if it rains or snows.

• Do not leave the vehicle with the roof window open.

• Keep the roof window free of snow and ice.

• The electrical connections should only be performed by an electrician.

• Replace the defective lights using ones of the same type and which have the

same technical data (12 V, 5 W).

WARNING! Beware of injury

Do not exceed the maximum allowable driving speed of 130 km/h,

because this can damage the roof light. Parts that come loose may injure

people in the vicinity.

NOTE

If you do not have sufficient technical knowledge for installing the

components in vehicles, you should have a specialist install the roof

window in your vehicle.

Heki2-de-Luxe--IO-16s.book Seite 4 Freitag, 2. Februar 2018 3:45 15

EN

Heki2 de Luxe Scope of delivery

5

3Scope of delivery

I

4Optional extras

5 Intended use

The Heki2 de Luxe roof light (item no. 9104100240) is suitable for installing in

caravans.

The four lights cannot be dimmed.

The maximum permissible speed is 130 km/h, as noise or damage could occur

depending on the vehicle design or installation position. In case of excessive noise,

a spoiler (accessory) can be used.

No. in

fig. 1

Quantity Designation

1 1 Outer frame with glass dome

2 1 Inner frame

316

16

Fastening screw ∅ 4.0 x 25 mm

Fastening screw ∅ 2.5 x 12 mm

4 16 Mounting bracket

(for roof thickness 25 – 32 mm)

5 6 Ventilation grille

64Lamp covers

NOTE

For roof thicknesses from 33 mm you will require an additional installa-

tion kit (chapter “Installing the Heki2 de Luxe” on page 7).

Designation Item no.

Spoiler, 800 mm 9104100236

Spoiler, 1100 mm 9104100237

Heki2-de-Luxe--IO-16s.book Seite 5 Freitag, 2. Februar 2018 3:45 15

EN

Instructions before installation Heki2 de Luxe

6

6 Instructions before installation

➤ Before installation, check the roof thickness of your vehicle. Consult the vehicle

manufacturer if you have any questions.

➤ Make sure that the power supply line and a switch are available for the

Heki2 de Luxe (12 V, 4 x 5 W) lighting in the vehicle.

➤ Make sure that the power supply line is suitably arranged and protected.

➤ When choosing the installation location, observe the following:

– Adjoining components (roof rack or attachment and reinforcing parts), cables

and cabinets in the vehicle interior must not get damaged when sawing the

hole.

– Sufficient space needs to be available for installing the inner and outer frames.

– Only fit the roof light on flat and parallel interior and exterior roof areas with a

maximum inclination of 15° to the horizontal.

– You may use an existing roof hole provided the roof light fits into it.

– You can fit the roof light sideways (hinge-side at front in direction of travel) or

lengthways (hinge-side on left or right in direction of travel).

6.1 Pressing out the hole

See fig. 2

6.2 Using the reinforcing rails

Supplementary to fig. 3

➤ Before installation, check whether the roof hole needs reinforcing.

➤ Remove the foam according to the width of your reinforcing rail (not in scope of

delivery) (A).

➤ Fit the reinforcing rails (B).

Heki2-de-Luxe--IO-16s.book Seite 6 Freitag, 2. Februar 2018 3:45 15

EN

Heki2 de Luxe Installing the Heki2 de Luxe

7

7 Installing the Heki2 de Luxe

!

A

See fig. 4

If you would like to connect the lighting:

➤ Lay the power supply line (1) in the middle on one of the two long sides.

The connection is designed for an insulated flat plug which is 4.8 mm wide and

0.8 mm thick.

The scope of delivery includes a mounting set, which is suitable for a roof thickness

of 25 – 32 mm. For roof thicknesses of 33 – 60 mm, you need to have a suitable

mounting set (see table).

➤ Measure your roof thickness W.

➤ Choose a suitable mounting set:

See fig. 5

➤ Check that the roof light has sufficient space around it (approx. 1 to 2 mm) in the

roof opening.

See fig. 6

➤ Clean the roof opening in the mounting area.

WARNING! Beware of injury

Disconnect the vehicle power supply before you begin and make sure it

cannot be restarted.

NOTICE!

Make sure that you do not damage any cables during installation.

Roof thickness

Mounting bracket

colour

Screws Item no.

25 – 32 mm Grey ∅ 4 x 25 mm Included in the

scope of delivery

33 – 39 mm Black ∅ 4 x 32 mm 9104100245

39 – 46 mm Yellow ∅ 4 x 40 mm 9104100246

46 – 53 mm Blue ∅ 4 x 46 mm 9104100247

53 – 60 mm Red ∅ 4 x 52 mm 9104100248

Heki2-de-Luxe--IO-16s.book Seite 7 Freitag, 2. Februar 2018 3:45 15

EN

Installing the Heki2 de Luxe Heki2 de Luxe

8

See fig. 7

A

➤ Seal the mounting frame with a flexible non-hardening sealing compound (e.g.

Sika-Lastomer-710).

See fig. 8

➤ Check the direction of travel when installing.

You can fit the roof light sideways (hinge-side at front in direction of travel) or

lengthways (hinge-side on left or right in direction of travel).

➤ Place the outer frame in the middle of the roof opening.

I

➤ Press the outer frame in the roof slightly so that the packing compound spreads

out.

See fig. 9

➤ Place the 16 mounting supports on the inside of the vehicle all the way into the

recess of the outer frame.

➤ Attach the 16 mounting supports using the fastening screws

∅ 4.

To do this use the large holes in the mounting supports.

➤ Tighten the screws 10 minutes after installation.

See fig. 0

A

➤ Place the inner frame on the outer frame and fasten it with the fastening screws

∅ 2.5 x 12 mm into the 16 mounting supports.

To do this use the small holes in the mounting supports.

Only fasten the screws slightly by hand.

➤ Check that the roller blinds can move freely.

If they do not, then loosen the screws slightly.

NOTICE!

Observe the instructions of the sealant manufacturer.

NOTE

Pay attention to the power supply lines.

NOTICE!

Pay attention to the connection cables.

Heki2-de-Luxe--IO-16s.book Seite 8 Freitag, 2. Februar 2018 3:45 15

EN

Heki2 de Luxe Using the Heki2 de Luxe

9

See fig. a

➤ Make sure the lights are fitted securely.

➤ Connect the power supply line to an available socket.

See fig. b

➤ Clip the ventilation grille (1) onto the long sides.

It needs to click in.

➤ Clip the light covers (2) onto the short sides.

They need to click in.

➤ Remove the protective film from both sides of the acrylic glass.

I

➤ After installing, check the roof light works properly.

➤ If necessary, enter the new vehicle height and weight in the vehicle documents.

8 Using the Heki2 de Luxe

8.1 Opening in the tilting position (fig. c)

➤ Press the latches on both rotary bolts and turn them 90° (A).

➤ Hold the bracket in the middle and move it out of the original position (B).

➤ Tilt it downwards.

➤ Push the glass dome upwards (C).

Opening the glass dome is supported by the two gas springs after approx.

150 mm.

➤ Swivel the bracket to the glass dome and press it back into the original

position (D).

To close it, follow the instructions in the reverse order.

8.2 Opening in the half-way position (fig. d)

➤ Press the latches on both rotary bolts and turn them 90° (A).

NOTE

If the protective film is exposed to sunlight for too long, it cannot be

taken off without leaving a residue.

Heki2-de-Luxe--IO-16s.book Seite 9 Freitag, 2. Februar 2018 3:45 15

EN

Using the Heki2 de Luxe Heki2 de Luxe

10

➤ Hold the bracket in the middle and move it out of the original position (B).

➤ Tilt it downwards.

➤ Push the glass dome upwards (C).

Opening the glass dome is supported by the two gas springs after approx.

150 mm.

➤ Open both the latches (D).

➤ Tilt the bracket to the half-way position.

➤ Pull the glass dome down until the bracket is lying in the holders.

➤ Secure the bracket with both latches.

To close it, follow the instructions in the reverse order.

8.3 Opening in the continuous ventilation position

(fig. e)

➤ Press the latches on both rotary bolts and turn them 90° (A).

➤ Push the glass dome upwards with both hands approx. 2 cm on both rotary

bolts.

➤ Turn the rotary bolt into the position provided for this (B).

To close it, follow the instructions in the reverse order.

8.4 Closing the roller blind (fig. f)

A

➤ Take hold of the recessed grip on the rod and pull it towards the rod on the other

side with the pivot until they both click into one another.

➤ Select the required position by moving the two latched-roller blinds at the same

time

NOTICE! Risk of damage due to a build-up of heat between the

roller blind and the window.

In strong sunlight, only close the blackout roller blind two thirds of the

way. Open the glass dome into the “continuous ventilation” position.

Heki2-de-Luxe--IO-16s.book Seite 10 Freitag, 2. Februar 2018 3:45 15

EN

Heki2 de Luxe Troubleshooting

11

8.5 Opening the roller blind (fig. g)

➤ Pull the roller blind so that the blind with the recessed grip is completely

extended.

➤ Separate the roller blinds by pressing the pivot.

➤ Guide the roller blind back using the recessed grip.

Do not let the roller blind spring back.

9 Troubleshooting

If you are unable to rectify the fault, get in touch with a specialist workshop.

Fault Possible cause Suggested remedy

The roof light does not

close completely.

Dirt between the glass and

frame

Clean the window.

Remove any leaves and twigs

between the glass and frame.

The flyscreen or black-

out roller blind cannot

be moved.

Dirt on the side guides Clean the side guides.

The lighting does not

work.

The vehicle’s power supply

to the roof light is inter-

rupted.

Check the power supply from the

vehicle to the roof light.

One or more lamps are

faulty.

Replace the lamps (12 V, 5 W).

Heki2-de-Luxe--IO-16s.book Seite 11 Freitag, 2. Februar 2018 3:45 15

EN

Maintaining and cleaning the Heki2 de Luxe Heki2 de Luxe

12

10 Maintaining and cleaning the

Heki2 de Luxe

A

➤ Clean the roller blind with mild soap and plenty of water.

11 Guarantee

The statutory warranty period applies. If the product is defective, please contact the

service partner in your country (addresses on the back on the instruction manual).

Our experts will be happy to help you and will discuss the warranty process with you

in more detail.

12 Disposal

➤ Place the packaging material in the appropriate recycling waste bins wherever

possible.

M

If you wish to finally dispose of the product, ask your local recycling centre

or specialist dealer for details about how to do this in accordance with the

applicable disposal regulations.

NOTICE!

Do not use any sharp or hard objects for cleaning since they may

damage the acrylic glass.

Only use cleaning agents that are approved by the manufacturer. Acrylic

glass polish (ref. no. 9600000128), special polishing cloth (ref. no.

9600000130) and acrylic glass cleaning agent (ref. no. 9600000129).

Heki2-de-Luxe--IO-16s.book Seite 12 Freitag, 2. Februar 2018 3:45 15

Page is loading ...

YOUR LOCAL

SALES OFFICE

dometic.com/sales-oﬃces

YOUR LOCAL

DEALER

dometic.com/dealer

YOUR LOCAL

SUPPORT

dometic.com/contact

dometic.com

A

complete list of Dometic companies, which comprise the Dometic Group, can be found in the public ﬁlings of:

DOMETIC GROUP AB Hemvärnsgatan 15 SE-17154 Solna Sweden

4445101892 09/2019 MO1105I02T

Dometic Heki 2 Assembly Instructions

This manual is also suitable for

Dometic Heki 2 Assembly Instructions

in other languages

Related papers

Other documents