Dometic Midi Heki B Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Dometic Midi Heki B Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
2
Dometic WAECO International GmbH
Hollefeldstrasse 63
D-48282 Emsdetten
dometic.com
I
IV
II
III
2
1
1
2
3
1
1
a
0 c
d
b
4445101891 02/2017 MO1071I01B
Midi-Heki--IO-16s.book Seite 2 Freitag, 10. Februar 2017 5:30 17
2
Dometic WAECO International GmbH
Hollefeldstrasse 63
D-48282 Emsdetten
dometic.com
2
1
4
1
2
5
1
2
1
2
1
1
3
1
a
f
0
c
d
e
b
g
4445101895 02/2017 MO1071I01E
Midi-Heki--IO-16s.book Seite 2 Freitag, 10. Februar 2017 5:32 17
2
Dometic WAECO International GmbH
Hollefeldstrasse 63
D-48282 Emsdetten
dometic.com
1
2
1
2
2
1
1
1
3
a
f
0
c
d
e
b
g
4445101893 02/2017 MO1071I01K
Midi-Heki--IO-16s.book Seite 2 Freitag, 10. Februar 2017 5:32 17
EN
Midi Heki roof light
3
Please read this instruction manual carefully before installation and first
use, and store it in a safe place. If you pass on the product to another
person, hand over this instruction manual along with it.
Table of contents
1 Notes on using the instruction manual. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
2 Safety and installation instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
3 Scope of delivery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
4 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
5 Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
6 Instructions before installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
7 Installing the Midi Heki . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
8 Using the Midi Heki . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
9 Opening and closing the roller blinds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
10 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
11 Maintaining and cleaning the Midi Heki . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
12 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
13 Disposal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Midi-Heki--IO-16s.book Seite 3 Freitag, 10. Februar 2017 5:29 17
EN
Notes on using the instruction manual Midi Heki roof light
4
1 Notes on using the instruction manual
!
A
I
2 Safety and installation instructions
Please observe the prescribed safety instructions and stipulations from the
vehicle manufacturer and service workshops.
The manufacturer accepts no liability for damage in the following cases:
Damage to the product resulting from mechanical influences and excess voltage
Alterations to the product without express permission from the manufacturer
Use for purposes other than those described in the operating manual
!
I
Please note the following:
If faults or disturbances occur, consult a specialist workshop immediately.
Risk of breakage! Do not tread on the glass dome.
WARNING!
Safety instruction: Failure to observe this instruction can cause fatal or
serious injury.
NOTICE!
Failure to observe this instruction can cause material damage and impair
the function of the product.
NOTE
Supplementary information for operating the product.
WARNING! Beware of injury
Do not exceed the maximum allowable driving speed of 160 km/h,
because this can damage the roof light. Parts that come loose may injure
people in the vicinity.
NOTE
If you do not have sufficient technical knowledge for installing the
components in vehicles, you should have a specialist install the roof
window in your vehicle.
Midi-Heki--IO-16s.book Seite 4 Freitag, 10. Februar 2017 5:29 17
EN
Midi Heki roof light Scope of delivery
5
Before starting your journey, check that the roof window is locked properly.
Before starting your journey, check the roof window for damage (such as tension
cracks in the acrylic glass).
Do not open the roof window while driving.
Do not open the window in strong wind or rain.
Close the roof window if it rains or snows.
Do not leave the vehicle with the roof window open.
Keep the roof window free of snow and ice.
The electrical connections should only be performed by an electrician.
3Scope of delivery
4Accessories
No. in
fig. 1
Quantity Label
1 1 Outer frame with glass dome
2 1 Inner frame
311
22
Fastening bolt 4
Fastening bolt 3.5
4 11 Mounting supports
Label Item no.
Spoiler, 800 mm 9104100236
Insect screen for winder and electric version 9104100259
Midi-Heki--IO-16s.book Seite 5 Freitag, 10. Februar 2017 5:29 17
EN
Intended use Midi Heki roof light
6
5 Intended use
The Midi Heki roof light is suitable for installation in motorhomes or caravans:
Temple version
with forced ventilation: Item No. 9104100253
without forced ventilation: Item No. 9104100254
Electric version
with forced ventilation: Item No. 9104100257
without forced ventilation: Item No. 9104100258
Geared version
with forced ventilation: Item No. 9104100255
without forced ventilation: Item No. 9104100256
The maximum travel speed permitted is 160 km/h, as noise or damage could occur
depending on the vehicle design or installation position. In case of excessive noise,
a spoiler (accessory) can be used.
I
6 Instructions before installation
Before installation, check the roof thickness of your vehicle. Consult the vehicle
manufacturer if you have any questions.
When choosing the installation location, observe the following:
Adjoining components (roof rack or attachment and reinforcing parts), cables
and cabinets in the vehicle interior must not get damaged when sawing the
hole.
Sufficient space needs to be available for installing the inner and outer frames.
Only fit the roof light on flat and parallel interior and exterior roof areas with a
maximum inclination of 15° to the horizontal.
You may use an existing roof hole provided the roof light fits into it.
You can fit the roof light sideways (hinge-side at front in direction of travel) or
lengthways (hinge-side on left or right in direction of travel).
NOTE
You can find the illustrations for your version on the following leaflets:
Temple version: “Midi Heki B” leaflet
Electric version: “Midi Heki E” leaflet
Geared version: “Midi Heki K” leaflet
Midi-Heki--IO-16s.book Seite 6 Freitag, 10. Februar 2017 5:29 17
EN
Midi Heki roof light Installing the Midi Heki
7
Only electric version:
Make sure that a power supply line is available for electrical actuation of the
Midi Heki in the vehicle.
Make sure that the power supply line is fused with 10 A (slow-blow).
6.1 Pressing out the hole
See fig. 2
6.2 Using reinforcing rails
Supplements fig. 3
Before installation, check whether the roof hole needs reinforcing.
Remove the foam according to the width of your reinforcing rails (not in scope of
delivery) (A).
Fit the reinforcing rails (B).
7 Installing the Midi Heki
Supplements fig. 4
The scope of delivery includes a mounting frame, which is suitable for a roof thick-
ness of 30 – 34 mm. For a roof thickness of 25 – 29 mm and 35 – 60 mm, you need
to have a suitable mounting set (see table).
Measure your roof thickness W.
Choose a suitable mounting set:
Roof thickness Item no.
25 – 29 mm 9104100261
30 – 34 mm Included in the scope of delivery
9104100262
35 – 42 mm 9104100263
43 – 52 mm 9104100264
53 – 60 mm 9104100265
Midi-Heki--IO-16s.book Seite 7 Freitag, 10. Februar 2017 5:29 17
EN
Installing the Midi Heki Midi Heki roof light
8
Only electric version:
!
A
Lay the power supply line in the middle on the long side, where the hinges
should go.
See
fig. 5
Check that the roof light has sufficient space around it (approx.1 to 2 mm) in the
wall section.
See
fig. 6
Clean the roof opening in the mounting area.
See
fig. 7
A
Seal the mounting frame with a flexible non-hardening sealing compound (e.g.
SikaLastomer-710).
See
fig. 8
Check the direction of travel when installing.
You can fit the roof light sideways (hinge-side at front in direction of travel) or
lengthways (hinge-side on left or right in direction of travel).
Place the outer frame in the middle of the roof opening.
I
Press the outer frame in the roof slightly so that the packing compound spreads
out.
WARNING! Beware of injury
Disconnect the vehicle power supply before you begin and make sure it
cannot be restarted.
NOTICE!
Make sure that you do not damage any cables during installation.
NOTICE!
Observe the sealant manufacturer's instructions.
NOTE
Electric version: Pay attention to the power supply lines.
Midi-Heki--IO-16s.book Seite 8 Freitag, 10. Februar 2017 5:29 17
EN
Midi Heki roof light Installing the Midi Heki
9
See fig. 9
Place the 11 mounting supports on the inside of the vehicle all the way into the
recess of the outer frame.
If you use wooden rails as reinforcement
A
Pre-drill two 2.2 mm holes for each mounting support in the roof construction
(A).
Fix the mounting supports on the roof with the 3.5 mm (B) screws included.
For other constructions, suitable screws must be used (not in scope of delivery).
Fix the 11 mounting supports with the 4 mm fixing screws.
To do this use the large holes in the mounting supports.
Tighten the screws 10 minutes after installation.
See
fig. 0
A
Press the inner frame into the groove (1) on the mounting supports.
See
fig. a
You can also fasten the inner frame on the two short sides using suitable screws (not
in scope of delivery):
Drill the two fastening holes beforehand.
Screw the screws into the fastening holes.
NOTICE!
Do not drill through the roof construction.
NOTICE!
Electric version: Make sure that the power supply line from the vehicle
is inserted in the inner frame opening and does not get stuck.
Midi-Heki--IO-16s.book Seite 9 Freitag, 10. Februar 2017 5:29 17
EN
Installing the Midi Heki Midi Heki roof light
10
7.1 Temple version
See fig. b
Clip on the ventilation grille.
It needs to click in.
Remove the protective film from both sides of the acrylic glass.
I
After installing, check the roof light works properly.
If necessary, enter the new vehicle height and weight in the vehicle documents.
7.2 Electric version
See fig. b
Fasten the inner frame using the two screws 4 x 20 mm.
Clip the switch into the ventilation grille.
Plug the connector (1) on the cable of the outer frame into the socket (2) of the
switch cable.
A
Connect the 12-V power supply line from the vehicle (3) to the terminal block (4).
See fig. c
Fasten the ventilation grille using the two screws 3.5 x 25 mm (1).
Check the functions of the window:
Open the roof light (see chapter “Using the electric version” on page 13).
Adjust the insect and the black roller blind.
Press the two cover caps (2) into the ventilation grille.
NOTE
If the protective film is exposed to sunlight for too long, it cannot be
taken off without leaving a residue.
NOTICE!
Make sure the polarity is correct:
Red wire: Positive terminal
Black wire: Negative terminal
Midi-Heki--IO-16s.book Seite 10 Freitag, 10. Februar 2017 5:29 17
EN
Midi Heki roof light Installing the Midi Heki
11
See fig. d
Clip on the ventilation grille.
It needs to click in.
Remove the protective film from both sides of the acrylic glass.
I
After installing, check the roof light works properly.
If necessary, enter the new vehicle height and weight in the vehicle documents.
7.3 Geared version
See fig. b
Fasten the inner frame using the two screws 4 x 20 mm.
See fig. c
Insert the appropriate adapter part for the roof thickness for the hand crank on the
drive sprocket:
Put the hand crank (3) to the closed position.
Position the crank in such a way that when folded, a light pre-load is noticeable.
A
Place the ventilation grille in the inner frame.
NOTE
If the protective film is exposed to sunlight for too long, it cannot be
taken off without leaving a residue.
No. Wall thickness Adapter part colour
1 25 – 42 mm Grey
2 43 – 60 mm Black
NOTICE!
Hold the hand crank in the open position when placing the ventilation
grille on the inner frame, otherwise the position of the hand crank will be
misaligned with the hexagon part.
Midi-Heki--IO-16s.book Seite 11 Freitag, 10. Februar 2017 5:29 17
EN
Installing the Midi Heki Midi Heki roof light
12
See fig. d
Fasten the ventilation grille using the two screws 3.5 x 25 mm (1).
Check the functions of the window:
Open the roof light (see chapter “Using the temple version” on page 15).
Adjust the insect and the black roller blind.
Press the two cover caps (2) into the ventilation grille.
See fig. e
Clip on the ventilation grille.
It needs to click in.
Remove the protective film from both sides of the acrylic glass.
I
After installing, check the roof light works properly.
If necessary, enter the new vehicle height and weight in the vehicle documents.
NOTE
If the protective film is exposed to sunlight for too long, it cannot be
taken off without leaving a residue.
Midi-Heki--IO-16s.book Seite 12 Freitag, 10. Februar 2017 5:29 17
EN
Midi Heki roof light Using the Midi Heki
13
8 Using the Midi Heki
8.1 Using the temple version
Opening and closing the Midi Heki (fig. c)
Press the release button (1), and open the roof hood with the bracket at the same
time (2).
Opening the roof light completely
Slide the bracket (2) into the I position.
Opening the roof light to the half-way position
Slide the bracket (2) into the II position.
Opening the roof light to the continuous ventilation position
Slide the bracket (2) into the III position so that it clicks into the locking position
at the back.
Closing the roof light
Slide the bracket (2) into the IV position.
Guide the bracket (2) with slight pressure to the left and right via the (3) catches
so that the roof hood is locked and the bracket (2) is on the release button (1).
8.2 Using the electric version
Opening and closing the Midi Heki (fig. e)
Press the rocker switch (1) until the desired position is reached or the motor
switches off.
I
Closing the Midi Heki (fig. e)
Press the rocker switch (1) until the desired position is reached or the motor
switches off.
Check whether the roof light is locked properly: Try to push up the pane of glass
with your hand (without using force).
NOTE
The roof light opens at an angle of approx. 70°.
Midi-Heki--IO-16s.book Seite 13 Freitag, 10. Februar 2017 5:29 17
EN
Using the Midi Heki Midi Heki roof light
14
Closing the roof light without power (emergency operation)
If the roof light does not close with the rocker switch (for example, if a power failure
occurs), you can close it manually. An emergency crank set is included in the scope
of delivery for this.
Remove the cover caps (fig. c 2) in the ventilation grille using the slotted screw-
driver.
Undo the fastening screws (fig. c 1) using the Phillips screwdriver.
Disconnect the power supply from the vehicle to the roof light.
Disconnect the 12-V power supply line of the vehicle (fig. b 3) from the power
supply line of the roof light (fig. b 4).
Press the motor unlocking (fig. g 1).
Insert the emergency crank (fig. g 2) in the hexagon socket.
Close the roof light by turning the crank anti-clockwise.
Check whether the roof light is locked properly: Try to push up the pane of glass
with your hand (without using force).
Reconnect the connecting cable.
Fit the ventilation grille.
Press the two cover caps (fig. c 2) into the ventilation grille.
Replacing the fuse (fig. b)
You can use the screwdriver from the emergency crank set (in the scope of delivery)
for this.
Remove the cover caps (fig. c 2) in the ventilation grille using the slotted screw-
driver.
Undo the fastening screws (fig. c 1) using the Phillips screwdriver.
Disconnect the power supply from the vehicle to the roof light.
Disconnect the 12-V power supply line of the vehicle (fig. b 3) from the power
supply line of the roof light (fig. b 4).
Replace the fuse (5) (plane fuse 10 A).
Reconnect the connecting cable.
Fit the ventilation grille.
Press the two cover caps (fig. c 2) into the ventilation grille.
Midi-Heki--IO-16s.book Seite 14 Freitag, 10. Februar 2017 5:29 17
EN
Midi Heki roof light Opening and closing the roller blinds
15
8.3 Using the temple version
Opening and closing the Midi Heki (fig. f)
To open: Turn the hand crank according to the direction of the arrow on the
crank.
Turn the hand crank until you feel its resistance. The opening angle of the roof
light is approx. 70°.
To close: Turn the hand crank according to the direction of the arrow on the
crank.
Turn the hand crank until you feel its resistance.
Check whether the roof light is locked properly: Try to push up the pane of glass
with your hand (without using force).
9 Opening and closing the roller blinds
Temple version: fig. d
Electric version: fig. f
Geared version: fig. g
A
I
Hold the recessed handle of each roller blind and pull it into the required posi-
tion.
NOTICE! Risk of damage due to a build-up of heat between the
roller blind and the window
In strong sunlight, only close the blackout roller blind two thirds of the
way.
NOTE
You can adjust the blackout roller blind and the flyscreen separately.
Midi-Heki--IO-16s.book Seite 15 Freitag, 10. Februar 2017 5:29 17
EN
Troubleshooting Midi Heki roof light
16
10 Troubleshooting
10.1 All versions
If you are unable to rectify the fault, get in touch with a specialist workshop.
10.2 Electric version
If you are unable to rectify the fault, get in touch with a specialist workshop.
Fault Possible cause Suggested remedy
The roof light does not
close completely.
Dirt between the glass and
frame
Clean the window.
Remove any leaves and twigs
between the glass and frame.
The flyscreen or black-
out roller blind cannot
be moved.
Dirt on the side guides Clean the side guides.
Fault Possible cause Suggested remedy
The roof light does not
open or close.
The vehicle's power supply
to the roof light is inter-
rupted.
Check the power supply.
The fuse is faulty. Replace the fuse (see chapter
“Replacing the fuse (fig. b)” on
page 14).
The rocker switch is
defective.
Get in touch with a specialist work-
shop.
The electric motor is
defective.
Midi-Heki--IO-16s.book Seite 16 Freitag, 10. Februar 2017 5:29 17
EN
Midi Heki roof light Maintaining and cleaning the Midi Heki
17
11 Maintaining and cleaning the Midi Heki
A
Clean the roller blind with mild soap and plenty of water.
Put talcum powder on the rubber seal.
12 Warranty
The statutory warranty period applies. If the product is defective, please contact the
service partner in your country (addresses on the back on the instruction manual).
Our experts will be happy to help you and will discuss the warranty process with you
in more detail.
13 Disposal
Place the packaging material in the appropriate recycling waste bins wherever
possible.
M
If you wish to finally dispose of the product, ask your local recycling centre
or specialist dealer for details about how to do this in accordance with the
applicable disposal regulations.
NOTICE!
Do not use any sharp or hard objects for cleaning since they may
damage the acrylic glass.
Only use cleaning agents that are approved by the manufacturer. Acrylic
glass polish (ref. no. 9600000128), special polishing cloth (ref. no.
9600000130) and acrylic glass cleaning agent (ref. no. 9600000129).
Midi-Heki--IO-16s.book Seite 17 Freitag, 10. Februar 2017 5:29 17
AUSTRALIA
Dometic Australia Pty. Ltd.
1 John Duncan Court
Varsity Lakes QLD 4227
1800 212121
+61 7 55076001
AUSTRIA
Dometic Austria GmbH
Neudorferstraße 108
A-2353 Guntramsdorf
+43 2236 908070
+43 2236 90807060
BENELUX
Dometic Branch Office Belgium
Zincstraat 3
B-1500 Halle
+32 2 3598040
+32 2 3598050
BRAZIL
Dometic DO Brasil LTDA
Avenida Paulista 1754, conj. 111
SP 01310-920 Sao Paulo
+55 11 3251 3352
+55 11 3251 3362
DENMARK
Dometic Denmark A/S
Nordensvej 15, Taulov
DK-7000 Fredericia
+45 75585966
+45 75586307
FINLAND
Dometic Finland OY
Mestarintie 4
FIN-01730 Vantaa
+358 20 7413220
+358 9 7593700
FRANCE
Dometic SAS
ZA du Pré de la Dame Jeanne
B.P. 5
F-60128 Plailly
+33 3 44633525
+33 3 44633518
Mail : vehiculesdeloisirs@dometic.fr
HONG KONG
Dometic Group Asia Pacific
Suites 2207-11 · 22/F · Tower 1
The Gateway · 25 Canton Road,
Tsim Sha Tsui · Kowloon
+852 2 4611386
+852 2 4665553
HUNGARY
Dometic Zrt. Sales Office
Kerékgyártó u. 5.
H-1147 Budapest
+36 1 468 4400
+36 1 468 4401
Mail: budapest@dometic.hu
ITALY
Dometic Italy S.r.l.
Via Virgilio, 3
I-47122 Forlì (FC)
+39 0543 754901
+39 0543 754983
Mail: vendite@dometic.it
JAPAN
Dometic KK
Maekawa-Shibaura, Bldg. 2
2-13-9 Shibaura Minato-ku
Tokyo 108-0023
+81 3 5445 3333
+81 3 5445 3339
MEXICO
Dometic Mx, S. de R. L. de C. V.
Circuito Médicos No. 6 Local 1
Colonia Ciudad Satélite
CP 53100 Naucalpan de Juárez
Estado de México
+52 55 5374 4108
+52 55 5393 4683
NETHERLANDS
Dometic Benelux B.V.
Ecustraat 3
NL-4879 NP Etten-Leur
+31 76 5029000
+31 76 5029019
NEW ZEALAND
Dometic New Zealand Ltd.
PO Box 12011
Penrose
Auckland 1642
+64 9 622 1490
+64 9 622 1573
NORWAY
Dometic Norway AS
Østerøyveien 46
N-3232 Sandefjord
+47 33428450
+47 33428459
Mail: firmapo[email protected]
POLAND
Dometic Poland Sp. z o.o.
Ul. Puławska 435A
PL-02-801 Warszawa
+48 22 414 3200
+48 22 414 3201
PORTUGAL
Dometic Spain, S.L.
Branch Office em Portugal
Rot. de São Gonçalo nº 1 – Esc. 12
2775-399 Carcavelos
+351 219 244 173
+351 219 243 206
RUSSIA
Dometic RUS LLC
Komsomolskaya square 6-1
RU-107140 Moscow
+7 495 780 79 39
+7 495 916 56 53
SINGAPORE
Dometic Pte Ltd
18 Boon Lay Way 06–140 Trade Hub 21
Singapore 609966
+65 6795 3177
+65 6862 6620
SLOVAKIA
Dometic Slovakia s.r.o. Sales Office Bratislava
Nádražná 34/A
900 28 Ivánka pri Dunaji
/+421 2 45 529 680
Mail: bratislava@dometic.com
SOUTH AFRICA
Dometic (Pty) Ltd.
Regional Office
South Africa & Sub-Saharan Africa
2 Avalon Road
West Lake View Ext 11
Modderfontein 1645
Johannesburg
+27 11 4504978
+27 11 4504976
SPAIN
Dometic Spain S.L.
Avda. Sierra del Guadarrama, 16
E-28691 Villanueva de la Cañada
Madrid
+34 91 833 60 89
+34 900 100 245
SWEDEN
Dometic Scandinavia AB
Gustaf Melins gata 7
S-42131 Västra Frölunda
+46 31 7341100
+46 31 7341101
Mail: info@dometicgroup.se
SWITZERLAND
Dometic Switzerland AG
Riedackerstrasse 7a
CH-8153 Rümlang
+41 44 8187171
+41 44 8187191
UNITED ARAB EMIRATES
Dometic Middle East FZCO
P. O. Box 17860
S-D 6, Jebel Ali Freezone
Dubai
+971 4 883 3858
+971 4 883 3868
UNITED KINGDOM
Dometic UK Ltd.
Dometic House, The Brewery
Blandford St. Mary
Dorset DT11 9LS
+44 344 626 0133
+44 344 626 0143
Mail: customerservices@dometic.co.uk
USA
Dometic RV Division
1120 North Main Street
Elkhart, IN 46515
+1 574-264-2131
GERMANY
Dometic WAECO International GmbH
Hollefeldstraße 63 · D-48282 Emsdetten
+49 (0) 2572 879-195 · +49 (0) 2572 879-322
Mail: info@dometic-waeco.de
dometic.com
4445101880 02/2017 MO1071I01T
Midi-Heki--IO-16s.book Seite 252 Freitag, 10. Februar 2017 5:29 17
/