Lindy 21733 Installation guide

Category
Rack consoles
Type
Installation guide

Lindy 21733 is a high-quality LCD Terminal that allows you to control multiple computers from a single console. It features a 17-inch LCD display, a built-in keyboard and touchpad, and a KVM switch that supports up to 4 computers.

With its compact design and easy-to-use interface, the Lindy 21733 is perfect for use in server rooms, data centers, and other environments where space is limited. It can be rack-mounted or used as a standalone unit, and it comes with a variety of mounting options to fit your specific needs.

The Lindy 21733 is a versatile and powerful tool that can help you to save time and money by simplifying your IT infrastructure. Here are just a few of the possible use cases for this device:

Lindy 21733 is a high-quality LCD Terminal that allows you to control multiple computers from a single console. It features a 17-inch LCD display, a built-in keyboard and touchpad, and a KVM switch that supports up to 4 computers.

With its compact design and easy-to-use interface, the Lindy 21733 is perfect for use in server rooms, data centers, and other environments where space is limited. It can be rack-mounted or used as a standalone unit, and it comes with a variety of mounting options to fit your specific needs.

The Lindy 21733 is a versatile and powerful tool that can help you to save time and money by simplifying your IT infrastructure. Here are just a few of the possible use cases for this device:

© LINDY ELECTRONICS LIMITED & LINDY
Tested to comply with FCC Standards
For Home and Office Use
English Manual
The
LCD KVM Terminal Basic
1. Check the packaging content if
everything is included.
2. Switch off all devices
before beginning
3.
The distance between front and rear 19
Packaging Contents
1. LCD Terminal
2. Front and rear mounting rails,
and rear fixing bracket
3.
IEC power supply with mains cable
4.
This quick installation guide & manual
Installation
1. Slide the
fixing bracket over the rear mounting rail with the bracket pointing to the front and the
mounting rail into the front rail and install them into
the L bracket points to the middle and the LCD Terminal can be laid on th
front 19’’ screw free.
2. Slide the LCD Termin
al on the brackets and fix it with the upper front 19
Additionally attach
the fixing brackets to the back to the LC
this prevents
the terminal from sliding out or falling down the rack.
3.
Connect the power supply,
the KVM system cable and
cable supports USB as well as PS/2 connections
Operation
Keyboard as well
as touchpad can easily be taken off
connected by standard USB cable. To take out the keyboard push it up through the hole on the base
Terminal. You may also connect other USB mouse and Keyboard to t
USB-PS/2
multi protocol devices if PS/2 support is required.
When connecting
KVM switches with PS/2 interface incompatibilities may occur. If this happens please use a
different KVM switch, recommended
to be operated in combination with LINDY KVM Switch Classic (PS/2 version).
WEEE (Waste of Electrical and Electronic Equipment), Recycling of Products
In 2006 the European Union
introduced regulations (WEEE) for the collection and recycling of all waste electrical and electronic
equipment. It is no longer allowable to simply throw away electrical and electronic equipment. Instead, these products must e
recycling process. E
ach individual EU member state has implemented the WEEE regulations into national law in slightly different ways. Please
follow your national law when you want to dispose of any electrical or electronic products. More details can be obtained from
WEEE recycling agency.
© LINDY ELECTRONICS LIMITED & LINDY
-ELEKTRONIK GMBH - 2
nd
Tested to comply with FCC Standards
Nos.: 21730 (DE), 21731 (IT), 21732 (FR),
21733 (UK), 21734 (CH), 21735 (US), 21736 (PT)
Single Rail LCD Terminal Basic
Quick
Installation
LCD KVM Terminal Basic
can be easily installed by a single person.
everything is included.
before beginning
the installation.
The distance between front and rear 19
’’ rails must
be between 56.5cm and 85cm.
and rear fixing bracket
for left and right side
IEC power supply with mains cable
This quick installation guide & manual
fixing bracket over the rear mounting rail with the bracket pointing to the front and the
mounting rail into the front rail and install them into
the designated position of
the L bracket points to the middle and the LCD Terminal can be laid on th
e
al on the brackets and fix it with the upper front 19
the fixing brackets to the back to the LC
D
Terminal using the
the terminal from sliding out or falling down the rack.
the KVM system cable and
then
switch on the devices. The KVM system
cable supports USB as well as PS/2 connections
, but not at the same
time. Do not
as touchpad can easily be taken off
the Terminal and be rep
connected by standard USB cable. To take out the keyboard push it up through the hole on the base
Terminal. You may also connect other USB mouse and Keyboard to t
he USB receptacles. In this case use
multi protocol devices if PS/2 support is required.
KVM switches with PS/2 interface incompatibilities may occur. If this happens please use a
with USB interface.
The LINDY LCD KVM Terminal Basic is not designed
to be operated in combination with LINDY KVM Switch Classic (PS/2 version).
WEEE (Waste of Electrical and Electronic Equipment), Recycling of Products
introduced regulations (WEEE) for the collection and recycling of all waste electrical and electronic
equipment. It is no longer allowable to simply throw away electrical and electronic equipment. Instead, these products must e
ach individual EU member state has implemented the WEEE regulations into national law in slightly different ways. Please
follow your national law when you want to dispose of any electrical or electronic products. More details can be obtained from
EDITION (March 2012)
Nos.: 21730 (DE), 21731 (IT), 21732 (FR),
21733 (UK), 21734 (CH), 21735 (US), 21736 (PT)
Single Rail LCD Terminal Basic
Installation
Guide & Manual
can be easily installed by a single person.
be between 56.5cm and 85cm.
fixing bracket over the rear mounting rail with the bracket pointing to the front and the
rear
the designated position of
your 19’’ rack, so that
brackets. Leave the upper
al on the brackets and fix it with the upper front 19
’’ screws to the rack.
Terminal using the
included (2x) screws,
switch on the devices. The KVM system
time. Do not
connect both kinds!
the Terminal and be rep
laced. They are internally
connected by standard USB cable. To take out the keyboard push it up through the hole on the base
of the
he USB receptacles. In this case use
KVM switches with PS/2 interface incompatibilities may occur. If this happens please use a
The LINDY LCD KVM Terminal Basic is not designed
WEEE (Waste of Electrical and Electronic Equipment), Recycling of Products
introduced regulations (WEEE) for the collection and recycling of all waste electrical and electronic
equipment. It is no longer allowable to simply throw away electrical and electronic equipment. Instead, these products must e
nter the
ach individual EU member state has implemented the WEEE regulations into national law in slightly different ways. Please
follow your national law when you want to dispose of any electrical or electronic products. More details can be obtained from
your national
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Lindy 21733 Installation guide

Category
Rack consoles
Type
Installation guide

Lindy 21733 is a high-quality LCD Terminal that allows you to control multiple computers from a single console. It features a 17-inch LCD display, a built-in keyboard and touchpad, and a KVM switch that supports up to 4 computers.

With its compact design and easy-to-use interface, the Lindy 21733 is perfect for use in server rooms, data centers, and other environments where space is limited. It can be rack-mounted or used as a standalone unit, and it comes with a variety of mounting options to fit your specific needs.

The Lindy 21733 is a versatile and powerful tool that can help you to save time and money by simplifying your IT infrastructure. Here are just a few of the possible use cases for this device:

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI