2. Hay
  3. PYRAMID BENCH 11

Hay PYRAMID BENCH 11 User manual

  • Hello! I'm a chat assistant and I've reviewed the instruction manual for the Pyramid Bench 11 & 12. This document provides a parts list and step-by-step instructions for assembling your new bench. I'm ready to answer any questions you might have about assembly or maintenance.
  • How many people are recommended to turn the bench over?
    What tool is needed for the assembly?
    Where can I find more information about Care & Maintenance?
– INSTRUCTION MANUAL –
DESIGN BY WIM RIETVELD
PYRAMID BENCH
11 & 12
 PARTS 
A
Leg section x2
C
Screw x4
D
Screw x4
B
Seat x1
 PARTS 
F
Allen key x1
E
Allen key x1
Protect the benchtop from scratches and other damage while assembling.
1.
Insert each
A part into both ends of part
B .
2.
Secure
A to
B by slightly tightening the
D parts.
Do not tighten completely at this stage.
3.
Secure
A to
B by tightening the
C parts.
Do not tighten completely at this stage.
4.
Turn the bench over (2 persons recommended).
5.
Make sure the bench is level and then tighten the
C parts completely.
6.
Make sure the bench is level and then tighten the
D parts completely.
7.
Done!
 CARE & MAINTENANCE 
Our Care & Maintenance offers guidance for optimal
maintenance of your HAY product. It includes advice
and instructions on cleaning and caring for specific
materials to prolong the life of your furniture.
Please find our Care & Maintenance
guide by scanning the QR code
You can find more relevant information on
Pyramid Bench 11 & 12 by scanning the QR code
You can also find the same information here
hay.dk/downloads
Havnen 1 8700 Horsens Denmark
+45 3164 6000 / hay@hay.com
10012023
/