Home Styles 5010-94 Assembly Instructions

Brand: Home Styles

Model: 5010-94

Type: Assembly Instructions

Home Styles 5010-94 is a kitchen island that can be used for food preparation, storage, and seating. It comes with a variety of features that make it a versatile and functional addition to any kitchen.

The island has a sturdy base and frame made of durable materials, ensuring stability and longevity. It comes with adjustable levelers to ensure that it is level, even on uneven floors. The island has a spacious work surface that provides ample room for food preparation and other tasks. It also has several drawers and shelves that provide ample storage space for cookware, utensils, and other kitchen essentials.

Part List

Home Styles Customer Service: www.homestylesfurniture.com,

[email protected],

888-680-7460, 877-831-0319

Tool(s) required for assembly: Phillips screwdriver, Level

Middle Panel

1 pc.

Divider

1 pc.

Door

1 pc.

Door

1 pc.

Shelf

3 pcs.

Drawer

2 pcs.

Shelf

2 pcs.

Side Panel

1 pc.

Side Panel

1 pc.

Plinth

1 pc.

Plinth

1 pc.

IMPORTANT

Carefully remove all the parts from the carton and

place them individually on a soft cloth to prevent

scratches or other damage.

Carefully and strictly follow these assembly instructions

to ensure a completed product as designed.

Do not use power tools above 8 volts to assemble.

Kitchen Island

50 94210-

Carton 5010 941 is also needed for assembly.-

Base

1 pc.

Rail

2 pcs.

Base

1 pc.

Plinth

1 pc.

Front Rail

1 pc.

Support

1 pc.

Refer to later page(s) of these

instructions for drawer assembly.

Back Panel

1 pc.

Back Panel

1 pc.

Front Panel

1 pc.

Back Stretcher

1 pc.

Support

2 pcs.

Door

1 pc.

Door

1 pc.

Assembly Instructions 2/10

Figure 1

STEP 1

Insert Cam Lock Screws into pre-drilled holes in Plinths (D), (E), Black Panels (F), (G) and

Front Panel (H), then tighten. (See Figure 1)

Orientate Magnets so Arrow labels on back of Magnets point in same direction as

Arrow labels on Back Panels (F) and (G), then attach Magnets to Back Panels (F) and (G)

with Wood Screws for Magnet into pre-drilled holes. (See Figure 2)

IMPORTANT

 Use a soft cloth between these parts and the ﬂoor.

 Do not use power tools above 8 volts to assemble.

 Do not tighten all the bolts until each part is properly assembled.

 The unit must be level to work properly. Use the included adjustable levelers to level.

 Keep Hex Wrench as the bolts may need to be tightened in the future.

Figure 2

Cam Lock Screw

Wood Screw for Magnet

Magnet

Cam Lock Screw

Arrow labels point in same direction

Cam Lock Screw

STEP 4

Attach unit from Step 2

to unit from Step 3

with Cam Locks.

Attach Rails (I) to unit

with Cam Locks.

Attach Front Panel (H) to unit

with Cam Locks.

Assembly Instructions 3/10

STEP 2

Orientate Base (C) so Arrow labels on Base (C)

point to Plinths (D) and (E), then attach Plinths (D)

and (E) to Base (C) with Cam Locks. (See Figure 3)

STEP 3

Attach Back Panel (F)

to Back Panel (G).

Cam Lock

Arrow labels point to Plinths (D) and (E)

Cam Lock

Figure 3

Assembly Instructions 4/10

STEP 5

Insert Cam Lock Screws into pre-drilled holes in Plinth (K),

Side Panels (L), (M) and Back Stretcher (O), then tighten.

STEP 6

Attach Middle Panel (N) to Base (J) with

Head Cap Bolts. (See Figure 4)

Note: Arrow label indicates front of

Middle Panel (N).

Attach Plinth (K) to unit with Cam Locks.

Figure 4

Cam Lock

Head Cap Bolt

Cam Lock Screw

Arrow label at front

Assembly Instructions 5/10

STEP 7

Attach Side Panel (L) to unit with

Cam Locks and Wood Screw

for Plinth.

Attach Front Rail (P) to unit with

Cam Lock.

Wood Screw for Plinth

Cam Lock

STEP 8

Attach Back Stretcher (O) to

unit with Cam Lock.

Attach Divider (Q) to

unit with Cam Lock.

Assembly Instructions 6/10

STEP 9

Attach Side Panel (M) to

unit with Cam Locks

and Wood Screw for Plinth.

STEP 10

Turn unit to its upright position.

Attach Top (B) to unit with Head Cap Bolts.

Head Cap Bolt

Cam Lock

Wood Screw for Plinth

Assembly Instructions 7/10

STEP 11

Insert Cam Lock Screws into pre-drilled holes in Supports (S),

then tighten.

STEP 12

Attach Supports (S) to Support (R) with Cam Locks.

STEP 13

Attach unit form Step 12 to unit from Step 10.

Cam Lock Screw

Cam Lock

Assembly Instructions 8/10

STEP 14

Turn unit from Step 4

to its upright position.

Insert Cam Lock Screws

into pre-drilled holes

in unit from Step 4,

then tighten.

Attach unit form Step 4

to unit from Step 13

with Cam Locks and

Head Cap Bolts (short).

STEP 15

Insert Adjustable Pins into

front panel and back panels

at desired level.

Place Shelves (X) into position.

Attach Doors (T) and (U) to

unit by sliding door hinges

into front panel hinges.

(See Figure 5)

Attach Top (A) to unit with

Head Cap Bolts.

Figure 5

Head Cap Bolt (short)

Cam Lock

Cam Lock Screw

Head Cap Bolt

Adjustable Pin

Assembly Instructions 9/10

Part List

STEP 18

Attach Handle with Machine Screws.

STEP 17

Slide Drawer Bottom (Z5) into groove.

Attach Drawer Bottom (Z5) to unit with

Wood Screws (short).

Drawer (Z)

STEP 16

Attach Drawer Front (Z1) and Drawer

Back (Z2) to Drawer Side (Z3) with

Wood Screws (long).

Attach Drawer Side (Z4) to unit with

Wood Screws (long).

Z1.

Drawer Front

2 pcs.

Z2.

Drawer Back

2 pcs.

Z3.

Drawer Side

2 pcs.

Z4.

Drawer Side

2 pcs.

Z5.

Drawer Bottom

2 pcs.

Handle

Machine Screw

Wood Screw (short)

Wood Screw (long)

Bottom

Roller at back

Assembly Instructions 10/10

Figure 7Figure 6

Machine Screw

Handle

Adjustable Pin

STEP 19

Insert Adjustable Pins into side panels at desired level.

Place Shelves (Y) into position.

Attach Doors (V) and (W) to unit by sliding door hinges into side panel hinges.

Attach Handles to Doors (V) and (W) with Machine Screws. (See Figure 6)

Slide Drawers (Z) into position.

Level unit by adjusting the adjustable levelers on bottom of unit. (See Figure 7)

NEVER

use glass cleaners on

finished furniture. Ammonia

chemically attacks the finish.

allow liquids to remain on furniture.

Absorption causes parts to warp

and split and finishes to delaminate.

NEVER

CARE INSTRUCTIONS

Do not use rubber

based placemats.

PREVENT

DISCOLORING

Do not use commercial

waxes and polishes.

PREVENT

YELLOWING

Do not place hot

objects on surface.

PREVENT

FINISH DAMAGE

Do not write

directly on surface.

PREVENT

MARKING

Do not use power tools

above 8 volts to assemble.

PREVENT

CRACKING

Do not place

in direct sunlight.

PREVENT

FADING

with a soft cloth moistened

in lukewarm soap and water.

Buff with a dry clean cloth.

CLEAN

Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of

purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized

retail affiliate, Home Styles is under no obligation to provide replacement parts. Parts are not available for fully assembled

items nor are parts available for sale. Replacements for missing or damaged hardware or parts may be requested at:

www.homestylesfurniture.com/customer-service/replacement-parts

Home Styles Customer Service: www.homestylesfurniture.com,

[email protected],

888-680-7460, 877-831-0319

Home Styles 5010-94 Assembly Instructions

Home Styles 5010-94 Assembly Instructions

Home Styles 5010-94 Assembly Instructions

Related papers

Other documents