2. Argos
  3. HOME LARGE TRESTLE TABLE DESK

Argos HOME LARGE TRESTLE TABLE DESK Assembly Instructions Manual

  • Hello! I am an AI chatbot trained to assist you with the Argos HOME LARGE TRESTLE TABLE DESK Assembly Instructions Manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
LARGE TRESTLE TABLE DESK
Dimensions
Width - 140cm
Depth - 60cm
Height - 75cm
Issue 3 - 20/07
/
2016
Important
– Please read these instructions fully before starting assembly
Assembly Instructions - Please keep for
future reference
616/9639
If you need help or have damaged or missing parts, call the Argos Aftersales
Helpline: 0345 640 0800
1
Note: if required the next
page can be cut out and used
as reference throughout the
assembly. Keep this page with
these instructions for future
reference.
To reduce the likelihood
of damaging your product,
please ensure that your
power drill is set on a low
torque setting.
Tabletop
(140X60CM)
1
Bottom board x 2
(54.5X29.5CM)
2
Cross bar x 2
(55X2CM)
4
Supporting bar x 4
(74 XØ0.6CM)
7
Cross bar x 4
(55X1.8CM)
5
Frame x 4
(33X73.5CM)
3
Cross bar
(102X2CM)
6
A
E
B C
Spanner x 1
Bolt (Ø6mm x 12 mm ) x 10
Bolt (Ø6mm x 60 mm ) x 2
Bolt (Ø6mm x 28 mm ) x 8 Bolt (Ø6mm x 32 mm ) x 21
Nut x 2
G
Allen key (68 x 25mm) x 1
FD
Assembly Instructions
4
4 x screw
Attach supporting bar 7
to the assembled
section by using
A .
Step 1
a:
Attach cross bar 4 & 5
Please do not tighten
all the screws until
step b is completed.
to frame 3 by using
screw 4 x C for each.
b:
c:
d:
a:
b:
c:
d:
3
3
4
5
5
C
G
2
B
G
G
A
7
E
F
Attach the shelf 2 to the
assembled section by
B .using 4 x screw
Repeat the above for
the other one.
Repeat the above for
the other one.
Secure the supporting
bar 7 by using screw A
and Nut E . Tighten
with supplied
spanner F .
Assembly Instructions
x 2
x 2
x 2
x 2
A
A
Assembly Instructions
Step 2
Step 3
Assembly Instructions
6
G
D
C
G
1
Attach crossbar 6 to the
assembled section by
.
Attached table top 1 to
the assembled section
C .
Assembly is complete.
5
using 2 x screw D
by using 5 x screw
/