Whirlpool WBE3377 NFCTS AQUA Program Chart

Brand: Whirlpool

Model: WBE3377 NFCTS AQUA

Type: Program Chart

The Whirlpool WBE3377 NFCTS AQUA is a high-end refrigerator with advanced features designed to keep your food fresh and organized. It boasts a "6th Sense Fresh Control" function that automatically adjusts temperature and humidity levels to create optimal storage conditions. The built-in water dispenser provides filtered water without opening the refrigerator door, saving energy and reducing condensation. With its antibacterial protection and flexible storage options, the Whirlpool WBE3377 NFCTS AQUA is a great choice for those seeking a reliable and efficient refrigeration solution.

ROBG

HUSKCZPLFIDKNOSEGRITPTESNLFRGBDE

PRODUCT SHEET

1. Control panel

Freezer compartment

2. Refrigerator compartment light (LED system)

3. Fan

4. Shelves / Shelf area

5. Multi-flow cold air system

6. Bottle rack*

7. Rating plate with commercial name

8. Fruits and vegetables crisper

9. Crisper divider*

10. Doors reversibility kit

11. Door trays

12. Bottle holder

13. Water tank

14. Egg trat

15. Door seals

Freezer compartment

15. Door trays

16. Upper basket (freezing zone or storing frozen food)

17. Shelves

18. Storage baskets for frozen food items

Anti-bacterial protection:

- Antibacterial filter* in the fan (3)

- Antibacterial additives* in the material of Crisper (8)

- Door seals are made of material able to inhibit

bacterial growth (15)

* Available on selected models

Notes:

- All shelves and door trays are removable.

- The internal temperatures of the appliance may be

affected by the ambient temperature, frequency of

door opening, as well as location of the appliance.

Temperature setting should take into consideration

these factors.

- The appliance accessories are not dishwasher safe.

- After inserting food, ensure that the freezer

compartment door closes properly.

HOW TO INCREASE FREEZER STORAGE

CAPACITY

You can increase storage capacity in the freezer

compartment by:

- removing the baskets to allow the storage of big

products.

- placing the food products directly on the freezer

shelves.

HOW TO START THE APPLIANCE

After plugging the appliance to the mains, it starts the

operation automatically. After starting the appliance, wait

at least 4-6 hours before placing food into the appliance.

When the appliance is connected to the power supply,

the display lights up and all the icons appear on the

display for approximately 1 second.

The default (factory) values of the freezer and refrigerator

compartments settings light-up.

Note:

- If food is placed in the refrigerator before it has cooled

completely, it may deteriorate.

FAN

The Fan improves temperature distribution inside the

refrigerator compartment, allowing better preservation

of stored food. By default, the fan is switched on. It is

advisable to keep the fan switched on, so that the “6th

Sense Fresh Control” function can work properly and

also when the ambient air temperature is above 27 ÷

28°C or if you notice drops of water on the glass shelves

or in sever humidity conditions. Please note that when

the fan is switched on it will not continuously work.

The fan will start/stop working depending on the

temperature and/or humidity level inside the fridge.

It is therefore absolutely normal if the fan does not move

even if the fan is switched on. The fan automatically

stops working when the fridge door is open.

Note: Do not obstruct the air intake area with food

items.

To guarantee the right performance at lower ambient

temperature (colder than 18°C) and to minimize Energy

Consumption, turn off the fan.

To switch off the FAN press and hold the “Temperature

& Fast Cool buttons” for 3sec: the “6th Sense Fresh

Control” icon turns off as confirmation that the fan has

been switched off.

To switched on the FAN repeat the same procedure.

If the appliance has the Fan it can be equipped with the

antibacterial filter.

Remove it from the box placed in the crisper drawer (8)

and insert into the cover of fan.

The replacement procedure is attached with the filter.

CONTROL PANEL

A. Temperature button

B. Temperature LEDs

C. “6th Sense Fresh Control” icon

D. Fast Cool icon

E. Fast Cool button

TEMPERATURE SETTING

Press the Temperature button (A) on the control panel to

adjust the temperature from the warmest

through the

ROBG

HUSKCZPLFIDKNOSEGRITPTESNLFRGBDE

PRODUCT SHEET

lower to coldest level. Pressing the Temperature

button, the temperature setting will change cyclically.

The temperature setting works for both the refrigerator

and the freezer compartments at the same time.

At first plug-in the appliance is set at medium

temperature (factory setting).

Following table shows temperature setpoints:

high temp.

med-high temp.

medium temp.

med-low temp.

low temp.

Legend:

Led ON Led OFF

FUNCTIONS

Fast Cool

The use of the Fast Cooling function is

recommended:

- to increase the cooling speed of the refrigerator

compartment when placing a very high quantity of

food within it,

- to maximize the freezing capacity of the freezer

compartment: for this reason you should activate

the Fast Cooling function before placing fresh food

to be frozen in the freezer compartment.

Press “Fast Cool” button to activate/deactivate Fast

Cool function.

When activated, the Fast Cool icon lights-up.

The function is automatically deactivated after

6 hours.

“6th Sense Fresh Control”

This function automatically works to ensure the

optimum storage conditions (regarding temperature

and humidity) to be quickly reached inside the

appliance. The fan must also be switched on for it

to works properly. The “6th Sense Fresh Control” is

activated by default.

To manually deactivate the function, press

the “Temp. & Fast Cool” buttons for 3sec: the

“6th Sense Fresh Control” icon turns off as

confirmation that the feature has been deactivated.

The function can be reactivated by repeating the

same procedure.

In the event of an interruption in electricity, the

“6th Sense Fresh Control” status resets to default

i.e. active.

Note: Remember that deactivation function

“6th Sense Fresh Control” switch off the FAN.

CLEANING

Important: Before carrying out any cleaning or

maintenance operation, unplug the appliance or

disconnect it from the power supply.

Regularly clean the appliance using a cloth and a

solution of warm water, with some soft detergent suitable

for cleaning the inside of the refrigerator compartment.

Do not use abrasive detergents or tools.

To ensure continuous and correct flow of defrost water,

regularly clean the inside of the draining hole on the back

of the refrigerator near the fruit and vegetable drawer,

using the tool provided.

NO FROST FREEZER COMPARTMENT

No Frost freezers provide chilled air circulation around

the storage areas and prevent the formation of ice,

thereby completely eliminating the need for defrosting.

Frozen items don’t stick to the walls, labeling stays

legible and storage space remains neat and clear.

NO FROST REFRIGERATOR COMPARTMENT

Refrigerator compartment defrosting is completely

automatic.

Droplets of water on the rear wall inside the refrigerator

compartment indicate that the automatic defrost phase is

in progress. The defrost water is automatically run into

a drain hole and will be collected in a container placed in

the back of the product, where it will evaporate.

LED LIGHT SYSTEM

The light system inside the refrigerator

compartment uses LEDs light, allowing

a better lightning as well as a very low

energy consumption.

If the LED light system does not work,

please contact the Service to replace it.

Important:

The refrigerator compartment light switches on when

the refrigerator door is opened. If the door is kept open

for more then 10 minutes the light will be automatically

switched off.

MALFUNCTION AND ALARM INDICATIONS:

Operation Alarms

In the event of operation alarms, they will be displayed

in the Temperature LEDs, (e.g. Failure1, Failure 2, etc...)

call After-sales Service and specify the alarm code.

The 3 central LEDs in the Temperature LEDs blinks

according to failure code described below:

Legend:

Led off Led flashing

Failure

code

Visualization

Error 2

RC Set points blink on/off at

0,5 sec. Blinks ON 2 times then

remain off for 5 seconds. Pattern

repeats.

Error 3

RC Set points blink on/off at

0,5 sec. Blinks ON 3 times then

remain off for 5 seconds. Pattern

repeats.

Error 6

RC Set points blink on/off at

0,5 sec. Blinks ON 6 times then

remain off for 5 seconds. Pattern

repeats.

ROBG

HUSKCZPLFIDKNOSEGRITPTESNLFRGBDE

PRODUCT SHEET

5019 320 00130 Printed 05/14

Water tank (fig. 1)

The water tank is made of antibacterial material. This prevents and reduces the proliferation of

bacteria. An internal container, with an active carbon filtered ensures water filtration.

To fill the tank: rotate the water inlet towards you and fill with water, using a jug or other suitable

container. Once the tank is full, close the water inlet by moving it back to its original position.

Always use drinking water only: any other liquid may impair product performance.

Obtaining filtered water (fig. 2)

After filling the tank, the water may not be immediately available. This is because the filtering

process may require a few minutes (depending on the amount of water in the tank).

To dispense water: with the refrigerator door closed, press the water dispenser tab with the glass.

If for safety reason water delivery must be prevented, simply press the stop at the back of the tab.

To release water delivery, move the stop back to its original position. It is recommended to drink the

supplied water from the dispenser in 6 hours.

Cleaning the water tank (fig. 3-4-5-6-7-8-9)

Periodically clean the water tank with running water. Twice a year it is recommended to keep

healthy the unit using specific products based on diluted chlorine that not modify the material

properties and rinse with current water.

To clean the tank, proceed as follows:

- (fig. 3) release and remove the top door tray

- (fig. 4) release and remove the water tank by lifting it and pulling towards you. Place the tank on a

flat surface, remove and wash the top cover.

Note: the tank must be refitted in its position as soon as possible, to

prevent the refrigerator from overheating.

- (fig. 5a -5b) remove the internal container and the filter, and wash them

separately. When washing the filter, only use clean water (no detergent or

sharp tools). To clean the disk filter, first remove it from the container.

- (fig. 6) for a more thorough cleaning, remove the valve cap (the fitting connecting

the tank to the refrigerator) by rotating it anticlockwise. Clean the cap. Important:

do not pull on the valve body (fig. 7).

- (fig. 8) replace the valve cap by rotating clockwise.

- (fig. 9) fit the tank back in place by placing it between the lateral guides of the door

and pushing it in position, ensuring that the valve is back in its original seat. Check

that the there are no gaps between the rubber seal of the tank and the door.

Suggested exchange of filter for a standard consumption usage of:

3,0 l/day 4 months

4,5 l/day 3 months

6,0 l/day 2 months

Filter replacement is not covered by product warranty. To order more water filter cartridges, please

contact your after-sales service.

UTILISATION AND MAINTENANCE OF THE WATER DISPENSER AND FILTER (if present)

Water dispenser

First use

The first time you use the water dispenser or after a long period left not used wash the tank and the filter with water.

The water dispenser provides fresh, filtered water, without the need of opening the refrigerator door. This will reduce

the number of times the door is opened, thus also reducing energy consumption of the product.

Fitting and replacing the active carbon filter

The water filter should be removed from the foil bag (found in the crisper drawer (item 7). Follow the instructions

provided with the filter.

Important: If the filter is left dry for an extended period of time, its performance may be reduced. Immerse the filter in

water for a few seconds to reinstate optimum performance.

Fig. 1

Tank

To fill the tank, rotate the cap

in the direction of the arrow

Stop

Activation

device

Water

drip tray

Fig. 2

Fig. 3

Fig. 4

Fig. 5

Fig. 6 Fig. 7

Fig. 8

Fig. 9

Whirlpool WBE3377 NFCTS AQUA Program Chart

Whirlpool WBE3377 NFCTS AQUA Program Chart

Whirlpool WBE3377 NFCTS AQUA Program Chart

Related papers

Other documents