Extremis GARGANTUA User manual

  • Hello! I have reviewed the user manual for the Gargantua table. This document provides comprehensive instructions for assembling and maintaining your table, including details on how to attach benches, backrests, and parasols. I'm ready to answer any questions you might have about the Gargantua described in this document.
  • What should I do if the benches are too high?
    What should I do if the benches are too low?
    How can I reduce movement in the bench?
Gargantua
IMPORTANT! RETAIN FOR FUTURE
REFERENCE: READ CAREFULLY.
Table of contents 1/2
Mounting kit
Exploded view
Assembly Gargantua
Assembly backrest
This is an interactive PDF
You can easily navigate through this manual, allowing you to
smoothly jump from one page to the other.
Table of contents 2/2
Assembly floor fastening
Assembly with Inumbra
Assembly bench fastening
Assembly with Inumbrina
Warnings - Text instructions -
Maintenance
6
8 x M10x60
8 x M10x60
8 x M10
8 x M10
Mounting kit GAR024 to fix the legs to the
tabletop
Mounting kit GAR025 to fix the central
cube to the legs
Mounting kit
7
4 x Bracket4 x M10x20
16 x M8x1616 x M8
Mounting kit GAR075 to fix
backrest to bench
Mounting kit GAR026 to fix the bench
supports to the benches
8
4 x M10x1404 x M10
Mounting kit GAR098 to fix the
bench fastening to bench
9
Exploded view
10
2.
1.
Gargantua
GAR024
N° 13/17
N° 17
45’
8 x M10x608 x M10
Do not tighten yet!
11
2. Go to page 25 if you want to fit the Inumbra parasol
Go to page 30 if you want to fit the Inumbrina parasol
Do not tighten yet!
12
3.
a
b
GAR025
8 x M10x608 x M10
Tighten all bolts, also from step 1
13
4.
5.
GAR026
16 x M8x1616 x M8
Do not tighten yet!
14
6.
Hook the benches in the highest position
(Tabletop height)
15
7.
8.
20 Nm
10kg / 22lb
MAX!
Make sure that the distance of the bench to
the tabletop is the same everywhere
Now tighten all bolts from step 5
16
9.
Check that the benches are the same height as the tabletop.
If they are too high, loosen the vertical bolt on this side
of the bench. If they are too low, tighten the bolt until the
bench is the same height as the tabletop
17
10.
If there is too much movement in the bench, you can adjust
this by tightening the 2 horizontal bolts. After you have done
this, secure the bolts by tightening the nuts
18
1.
5’
N° 17
Backrest
19
2.
GAR075
2 x Bracket2 x M10x20
20
1.
15’
N° 13
Floor fastening
On the inside of the legs
/