2. Computers & electronics
  3. TVs & monitors
  4. Flat panel desk mounts
  5. Innovative
  6. E2-1-248

Innovative E2-1-248, E2 Monitor Arm, E2-1-104, E2-1-124, E2-2-104, E2-2-124, E2-2-248 Installation guide

  • Hello! I've reviewed the installation instructions for the Human Active Technology E2 Single flat panel desk mount. The document provides detailed guidance on how to install the mount using either a desk clamp or a thru-desk option and gives torque specifications for proper assembly. I'm ready to answer any questions you have about the device or the installation process.
  • What is the maximum monitor size supported?
    What is the rated weight capacity of this mount?
    What type of mounting options are available?
© 2022 Human Active Technology, LLC P516479 REV D
32"
MAX
2.2-20lbs
RATED
Human Active Technology
800 524 2744
customerservice@team-hat.com
team-hat.com
E2-1
Installation Instructions
PAGE 1 OF 11
A Top Down Mount 1x
8524
B Quick Connect VESA Plate 1x
114808
C M4 x 12mm Phillips Pan Head Screw 4x
701153
D 3/32" Allen Wrench 1x
700146
E 7/32" Allen Wrench 1x
701127
F 4mm Allen Wrench 1x
709877
G 5mm Allen Wrench 1x
710838
H* M8 x 95mm SCHS 1x
716061
I* Spacer 1x
701544
J* Lock Nut 1x
710015
PARTS LIST
* Included with optional thru-desk kit only, 8540-TM-CK (sold separately).PAGE 2 OF 11
E
A
OR
Desk thickness
up to 1.5" (3.8 cm)
Desk thickness
up to 1.5" (3.8 cm)
iIf the monitor arm or pole does not easily fit into the
mount, remove the bushing from the mount and place
it on the monitor arm or pole and press firmly back
into the mount.
OR
1 2
2a 2b 2c
7/32"
DESK CLAMP CONFIGURATION
Tighten to
60 in-lbs
minimum
PAGE 3 OF 11
3 4
H
I
J
7/32"
Tighten to
60 in-lbs
minimum
7/32"
Desk thickness
up to 1.5" (3.8 cm)
E
OPTIONAL THRU-DESK CONFIGURATION
PAGE 4 OF 11
5
PAGE 5 OF 11
6
B
C
PAGE 6 OF 11
7
PAGE 7 OF 11
8
7/32"
E
PAGE 8 OF 11
9
3/32"
5 mm
3/32"
D
G
D
Tighten to
5 in-lbs
minimum
PAGE 9 OF 11
10
4 mm
F
PAGE 10 OF 11
11
PAGE 11 OF 11
/