aspenhome IHP-333-KHAN Assembly Instructions

Type
Assembly Instructions

This manual is also suitable for

Page 1/1
ITEM NO: IHP-332-FSL/KHA Door Bookcase
Thank you for purchasing this quality product. Be sure to check all packing material carefully for
small parts that may come loose inside the carton during shipment.
BEFORE USING THIS PRODUCT PLEASE READ, UNDERSTAND, AND FOLLOW THESE INSTRUCTIONS.
Save these instructions for future reference. FOR INDOOR USE ONLY
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
TOOLS REQUIRED (NOT PROVIDED)
PHILLIPS SCREWDRIVER
IHP-333-FSL/KHA Open Bookcase
IHP-332 IHP-333
FUNCTIONALITY INSTRUCTION
Metal Plate
Wood Screw
Take off one screw from each metal
plate and swing it in an ideal place.
Line up the front of bookcases then
re-secure the metal plate with screw
to adjacent bookcase. If you prefer to adjust the shelf
location, remove the screws and
move shelf brackets to the
desired location. Then secure the
brackets to shelf with screws.
Adjust the leveler
when necessary
Leveler on metal bases
COMPONENTS LIST: IHP-332
No. Description Sketch Quantity
1 Case 1 PC
2 Metal Base 2 PCS
COMPONENTS LIST: IHP-333
No. Description Sketch Quantity
1 Case 1 PC
2 Metal Base 2 PCS
Adjustable wood shelves
STEP 1: Put the bookcase backside down on a soft surface. Match the
hole pattern on metal bases to the threaded inserts on the bottom and
attach to the bottom of the case by using 8 bolts(A), lock washers(B) and
flat washers(C). Turn the case to the upright position. Case
Bottom
Metal Base
A
B
HARDWARE LIST: IHP-332 / IHP-333
No. Description Sketch Quantity
A Bolt Ø5/16"*1" 8 PCS
B Lock Washer Ø5/16" 8 PCS
C Flat Washer Ø5/16" *3/4" 8 PCS
D Allen Wrench 1 PC
C
D
02-15-2022
  • Page 1 1

aspenhome IHP-333-KHAN Assembly Instructions

Type
Assembly Instructions
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI