12-26-2016
Page 1/2
ITEM NO: IHP-378-FSL Combo File
Thank you for purchasing this quality product. Be sure to check all packing material carefully for
small parts that may come loose inside the carton during shipment.
BEFORE USING THIS PRODUCT PLEASE READ, UNDERSTAND, AND FOLLOW THESE INSTRUCTIONS.
Save these instructions for future reference. FOR INDOOR USE ONLY
aspenhome RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
COMPONENTS LIST:
No. Description Sketch Quantity
1 Case 1 PC
2 Metal Base 2 PCS
TOOLS REQUIRED (NOT PROVIDED)
PHILLIPS SCREWDRIVER
STEP 1: Put the case backside down on a soft surface. Match the hole
pattern on metal bases to the threaded inserts on the bottom and attach to
the bottom of the case by using 8 bolts(A), lock washers(B) and flat
washers(C). Turn the case to the upright position.
Remove the wood screws
on the back panels of
drawer box to remove the
rod loops and file rods if
necessary.
FUNCTIONALITY INSTRUCTION
Leveler on metal bases
Adjust the leveler
when necessary
Heavy Duty Ball Bearing Slide
Locking file drawers hold
letter or legal size files
Case
Bottom
Metal Base
A
B
C
D
HARDWARE LIST:
No. Description Sketch Quantity
A Bolt Ø5/16"*1" 8 PCS
B Lock Washer Ø5/16" 8 PCS
C Flat Washer Ø5/16" *3/4" 8 PCS
D Allen Wrench 1 PC