aspenhome IHPHOGRP2 Assembly Instructions

aspenhome
Brand
aspenhome
Model
IHPHOGRP2
Type
Assembly Instructions
12-26-2016
Page 1/1
ITEM NO: IHP-316-FSL 66" Credenza Desk
Thank you for purchasing this quality product. Be sure to check all packing material carefully for
small parts that may come loose inside the carton during shipment.
BEFORE USING THIS PRODUCT PLEASE READ, UNDERSTAND, AND FOLLOW THESE INSTRUCTIONS.
Save these instructions for future reference. FOR INDOOR USE ONLY
aspenhome RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
HARDWARE LIST:
No. Description Sketch Quantity
A Bolt Ø5/16"*1" 16 PCS
B Lock Washer Ø5/16" 16 PCS
C Flat Washer Ø5/16" *3/4" 16 PCS
D Allen Wrench 1 PC
COMPONENTS LIST:
No. Description Sketch Quantity
1 Case 1 PC
2 Metal Base 4 PCS
TOOLS REQUIRED (NOT PROVIDED)
PHILLIPS SCREWDRIVER
STEP 1: Put the case backside down on a soft surface.
Match the hole pattern on metal bases to the threaded
inserts on the bottom and attach to the bottom of the
case by using 16 bolts(A), lock washers(B) and flat
washers(C). Turn the case to the upright position.
Case Bottom
Metal Base
Press here to release
Hook latch
Metal plate
FUNCTIONALITY INSTRUCTION
2 AC outlet / 2 USB power pack
Keys for file lock.
Do not trash.
Locking file drawers hold
letter or legal size files If you prefer to adjust the shelf
location, remove the screws and
move shelf brackets to the desired
location. Then secure the brackets
to shelf with screws.
Adjustable wood shelf
Flip down tray
Leveler on metal bases
Adjust the leveler
when necessary
Remove the wood screws on the
side of drawer box to remove the
rod loops and file rods if necessary.
A
B
C
D
12-26-2016
Page 1/1
ITEM NO: IHP-317-FSL 66" Credenza Hutch
Thank you for purchasing this quality product. Be sure to check all packing material carefully for
small parts that may come loose inside the carton during shipment.
BEFORE USING THIS PRODUCT PLEASE READ, UNDERSTAND, AND FOLLOW THESE INSTRUCTIONS.
Save these instructions for future reference. FOR INDOOR USE ONLY
aspenhome RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
IHP-317 TOOLS REQUIRED (NOT PROVIDED)
PHILLIPS SCREWDRIVER
STEP 1: Put the hutch on the credenza top. Take off one screw from
each metal plate on the back of hutch and swing it in an ideal place.
Then re-secure the metal plate with screw to credenza.
IHP-317
IHP-316
FUNCTIONALITY INSTRUCTION
If you prefer to adjust the
shelf location, remove the
screws and move shelf
brackets to the desired
location. Then secure the
brackets to shelf with screws.
Adjust the leveler
when necessary
IHP-316
IHP-317
Adjustable wood shelves
  • Page 1 1
  • Page 2 2

aspenhome IHPHOGRP2 Assembly Instructions

aspenhome
Brand
aspenhome
Model
IHPHOGRP2
Type
Assembly Instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents