1. 2.
INSTALLATION INSTRUCTIONS
4.3.
Please read all of the instructions and look at the pictures before attaching the ProClip.
1. Use the enclosed alcohol pad to clean the area where the ProClip is to be installed. Peel off the cover of
adhesive tape on the ProClip. Place the left side of the ProClip in front of the air vent and then press the thin
angled edge into the seam/gap between the air vent and the console side wall.
2. Flip the ProClip to the right, towards the center console, so the angled edge on the left side of the ProClip
hooks behind the air vent edge. Place your index fingers behind the ProClip. Pull towards you and hook the
angled edge on the right side of the ProClip around the console edge.
3. Press firmly on the left side of the ProClip so it flexes forward until you hear/feel a click.
4. The ProClip is in place.
2(2)